Ozito MSK-001U Handleiding

Ozito Schuurmachine MSK-001U

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito MSK-001U (3 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

MULTI

SANDER

200W

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Motor: 200W

No Load Speed: 7,000-12,000/min

Paper Fitment: Hook & Loop

Paper Size: 145x100mm (Triangular)

125mm (Circular)

186x94mm (1/3 Sheet)

Base Size: 145x100mm (Triangular)

123mm (Circular)

183x92mm (1/3 Sheet)

Oscillating Speed: 14,000-24,000/min

Oscillating Circuit: 0.8mm

Protection Class: II

Tool Weight: 1.38kg

STANDARD EQUIPMENT

Multi Sander

3 x Sanding Paper

Dust Canister

3 x Sanding Base

MULTI SANDER SAFETY WARNINGS

MSK-001U

Art.-No.: 30.003.52 I.-No.: 11018

ozito-diy.co.uk

OZITO UK Champion’s Business Park, Unit 10, 1st Floor, Arrowe Brook Road, Upton, Wirral, Merseyside, CH49 0AB

All of our products undergo strict quality checks to ensure that they reach

you in perfect condition. In the unlikely event that your device develops a

fault, please contact our service department at the address shown on this

guarantee card. You can also contact us by telephone using the customer

service number shown. Please note the following terms under which

guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the

manufacturer mentioned below promises to buyers of its new products

in addition to their statutory guarantee claims are not affected by this

guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or

manufacturing faults on a product which you have bought from the

manufacturer mentioned below are limited to either the rectication of said

defects on the product or the replacement of the product, whichever we

prefer.

Please note that our devices are not designed for use in commercial, trade

or professional applications. A guarantee contract will not be created if the

device has been used by commercial, trade or industrial business or has

been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly

instructions or due to incorrect installation, a failure to follow the operating

instructions (for example connecting it to an incorrect mains voltage or

current type) or a failure to follow the maintenance and safety instructions

or by exposing the device to abnormal environmental conditions or by lack

of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example

overloading the device or the use or unapproved tools or accessories),

ingress of foreign bodies into the device (such as sand, stones or dust,

transport damage), the use of force or damage caused by external forces

(for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural

wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 36 months from the original

date of purchase and is intended for DIY (Do It Yourself) use only. Warranty

excludes consumable parts. Guarantee claims should be submitted

before the end of the guarantee period within two weeks of the defect

being noticed. No guarantee claims will be accepted after the end of the

guarantee period. The original guarantee period remains applicable to the

device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts tted will not result in an extension of the

guarantee period, and no new guarantee will become active for the work

performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST

RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR

Please refer to the restrictions of this warranty concerning wearing parts,

consumables and missing parts as set out in the service information in

these operating instructions.

CUSTOMER SERVICE HELPLINE

GB: 0151 294 4488

IRL: 1850 882711

Ozito-diy.co.uk

WARRANTY

0518

MAINTENANCE

DESCRIPTION OF SYMBOLS

TROUBLE SHOOTING

• Keep the ventilation vents of the sander clean at all times, if possible, prevent

foreign matter from entering the vents.

• After each use, blow air through the sander housing to ensure it is free from

all dust particles which may build up. Build up of dust particles may cause the

drill to overheat and fail.

• If the enclosure of the drill requires cleaning, do not use solvents but a moist

soft cloth only. Never let any liquid get inside the drill; never immerse any part

of the drill into a liquid.

Replacing the Hook & Loop Backing Pad

After considerable use, the hook and loop backing pad surface will become

worn, and must be replaced when it no longer offers a rm grip. The

replacement backing pad can be ordered through the Special Orders Desk at

any Bunnings store.

1. To replace, remove the four philips head screws by rotating anti-clockwise.

2. Place new backing pad on the tool and retighten the four philips head

screws by rotating clockwise.

Note: Ozito Industries will not be responsible for any damage or injuries

caused by the repair of the tool by an unauthorised person or by mishandling

of the tool.

Sparking visible through the housing air vents

A small amount of sparking may be visible through the housing vents.

This is normal and does not indicate a problem.

Excessive sparking visible through the housing air vents

and/or the drill failing to operate

May indicate the carbon brushes have worn out and need to be replaced. Carbon

brushes should only be replaced by a qualied electrician or power tool repairer.

Sanding bases are not aligning correctly

The mounting plate at the base of the tool may need to be rotated slightly so that

the holes align correctly.

Ensure there are no aligning pins stuck into the base of the tool.

For the triangular and rectangular sanding bases, also check that there are 4

aligning pins positioned correctly in the top of the sanding pad.

Sandpaper Selection

Selecting the correct grit of sandpaper is an important step in achieving

optimum results. Coarse grit will remove the most material. Finer grit will

produce a smoother nish. The condition of the workpiece will determine the

grit of the sandpaper to be used. The higher the grit number, the ner the

grade of sandpaper.

If the surface is rough, start with a coarse grit and sand until the surface is

uniform. Medium grit may then be used to remove scratches left by the coarser

grit. Finer grit is then used to nish the surface. Always continue sanding with

each grade of sandpaper until the surface is uniform.

MATERIAL APPROPRIATE GRIT

Coarse Sanding Fine Sanding

Paintwork 180 400

Wood: Softwood 60 240

Hardwood 60 180

Veneer 240 320

Note: If intermediate sanding is required, choose a grit rating between coarse and

ne. The above table is intended as a guide only. To ensure a satisfactory result,

a small, inconspicuous area should rst be tested to ensure the grit of sandpaper

chosen is suitable for the desired nish.

Sanding Tips

Never force the sander. The weight of the sander supplies adequate pressure,

allowing the sandpaper to do the work. Applying additional pressure will slow the

motor, rapidly wear the sandpaper, and greatly reduce the sander speed. This will

slow the removal rate and produce an inferior quality surface.

CAUTION: Excessive pressure will overload the motor, causing possible damage

to the sander by overheating the motor; or damage to the workpiece.

Be sure to check your workpiece often. The sander is capable of removing

material rapidly, especially with coarse paper.

The orbital action of your sander allows you to sand with the grain, or at any angle

across it for most sanding jobs. In the nal stages a better nish will be achieved

by sanding with the grain.

Do not sand on one spot for too long. The sander’s rapid action may remove too

much material, creating an uneven surface.

Danger! Read the operating instructions to reduce the risk of

inquiry.

Caution! Wear ear-muffs. The impact of noise can cause

damage to hearing.

Caution! Wear a breathing mask. Dust which is injurious to

health can be generated when working on wood and other

materials. Never use the device to work on any materials

containing asbestos!

Caution! Wear safety goggles. Sparks generated during

working or splinters, chips and dust emitted by the device can

cause loss of sight.

Double insulated / Protection class II

DECLARATION OF CONFORMITY

For EU countries only

Never place any electric power tools in your household refuse.

To comply with European Directive 2012/19/EC concerning old electric

and electronic equipment and its implementation in national laws, old

electric power tools have to be separated from other waste and disposed

of in an environment-friendly fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to the manufacturer, the

owner of the electrical equipment must make sure that the equipment is

properly disposed of if p1-he no longer wants to keep the equipment. The old

equipment can be returned to a suitable collection point that will dispose

of the equipment in accordance with the national recycling and waste

disposal regulations. This does not apply to any accessories or aids

without electrical components supplied with the old equipment.

The reprinting or reproduction by any other means, in whole or in part, of

documentation and papers accompanying products is permitted only with

the express consent of the iSC GmbH.

Subject to technical changes

SPARE PARTS

Spare parts can be ordered from the Special Orders

Desk at your local Bunnings Warehouse or Homebase

store.

For further information, or any parts visit

www.ozito-diy.co.uk or contact Ozito Customer Service:

Great Britain: 0151 294 4488

Ireland: 1850 882711

E-mail: info@ozito-diy.co.uk

SERVICE INFORMATION

Please note that the following parts of this product are subject to normal

or natural wear and that the following parts are therefore also required

for use as consumables.

* Not necessarily included in the scope of delivery!

Category Example

Wear parts* Grinding/sanding plate

Consumables* Grinding/sanding paper

Missing parts

WARNING! When using mains-powered tools, basic safety precautions, including the

following, should always be followed to reduce risk of re, electric shock, personal injury

and material damage.

Read the whole manual carefully and make sure you know how to switch the tool off in an emergency,

before operating the tool.

Save these instructions and other documents supplied with this tool for future reference.

Before you connect the equipment to the mains supply make sure that the data on the rating plate are

identical to the mains data.

This tool is double insulated therefore no earth wire is required.

If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid

a hazard.

Note: Double insulation does not take the place of normal safety precautions when operating this tool. The

insulation system is for added protection against injury resulting from a possible electrical insulation failure

within the tool.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the

extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective.

When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not

suitable for the power input of the tool or which is damaged or defective may result in a risk of re and electric

shock.

GENERAL POWER TOOL SAFETY WARNINGS

ELECTRICAL SAFETY

WARNING! “Read all safety warnings, instructions, illustrations and specications

provided with this power tool.” Failure to follow the warnings and instructions may result in electric

shock, re and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings refers

to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool. Distractions can cause you to

lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching outlets will

reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the

risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase

the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric shock.

f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do

not use a power tool while you are tired or under the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools may result in serious personal injury.

b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce

personal injuries.

c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to

power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your

nger on the switch or energising power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the

power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of dust collection can reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of tools allow you to become complacent and

ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct power tool

will do the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from

the power tool before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the

power tool or these instructions to operate the power tool. Power tools are dangerous in the hands

of untrained users.

e. Maintain power tools and accessories. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s operation. If damaged,

have the power tool repaired before use. Many accidents are caused by poorly maintained power

tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking

into account the working conditions and the work to be performed. Use of the power tool for

operations different from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

5. Service

a. Have your power tool serviced by a qualied repair person using only identical replacement

parts. This will ensure that the safety of the power tool is maintained.

SOUND & VIBRATION

Sound and vibration values were measured in accordance with EN 60745.

Lpa sound pressure level: 79.0 dB

pa uncertainty: 3 dB

Lwa sound power level: 90.0 dB

wa uncertainty: 3 dB

Wear ear-muffs.

The impact of noise can cause damage to hearing.

Total vibration values (vector sum of three directions) determined in

accordance with EN 60745.

Vibration emission value ah = 13.7 m/s2

K uncertainty = 1.5 m/s2

Additional information for electric power tools

Warning!

The specied vibration value was established in accordance with a

standardized testing method. It may change according to how the electric

equipment is used and may exceed the specied value in exceptional

circumstances.

The specied vibration value can be used to compare the equipment with other

electric power tools.

The specied vibration value can be used for initial assessment of a harmful

effect.

Keep the noise emissions and vibrations to a minimum.

• Only use appliances which are in perfect working order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

Additional saftey instructions for sanders

• This tool may be only be used for dry grinding/sanding operations.

• Always guide the power cable away from the back of the tool.

• Use of the tool on materials containing asbestos is prohibited.

• Always remove the plug from the power supply socket before carrying out any work

on the machine (cleaning the sander, changing the sandpaper, etc).

• Always disconnect the machine by removing the plug from the socket, not by pulling

on the power cable.

• Keep your workplace clean and well illuminated.

• Make sure that the workpiece is sufciently secured so that it cannot slip.

• Keep children away.

• For your own sake, keep the machine clean at all times and check it for signs of

damege each time after using it.

• Make sure that the switch is set to OFF before you insert the plug into the power

supply socket.

• Make sure of your footing, particularly when working on ladders and platforms.

• Harmful or toxic dust can be produced when working on wood or metal. Touching or

inhaling this dust can be harmful for the operator and other persons nearby.

• Hold the equipment by the insulated handles because the grinding/sanding belt may

strike the equipment’s own power cable. Damaging a live cable may make the matal

parts of the equipment live and cause an electric shock.

• To protect your health, always wear safety goggles and a dust mask during sanding/

frinding work!

• If you discover any damage to the machine, use the exploded diagram and the spare

parts list to determine which parts need to be ordered from Customer Service.

• Important! Wear safety googles and a dust mark.

• This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by

a person responsible for their safety. Children should be supervised to ensure that

they do not play with the appliance.

Do not lose these safety instructions.

Yang/Product-ManagementWeichselgartner/General-Manager

explains the following conformity according to EU directives and norms for

the following product

Multi Sander MSK-001U (Ozito)

Standard references: EN 60745-1; EN 60745-2-4;

EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3

Landau/Isar, den 22.05.2018

First CE: 18 Archive-File/Record: NAPR018611

Art.-No.: 30.003.52 I.-No.: 11018 Alex KurzDocuments registrar:

Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar

2014/29/EU

2005/32/EC_2009/125/EC

2014/35/EU

2006/28/EC

2014/30/EU

2014/32/EU

2014/53/EC

2014/68/EU

EU/2016/426

Noti ed Body:

EU/2016/425

2011/65/EU

2006/42/EC

Annex IV

Noti ed Body:

Reg. No.:

2000/14/EC_2005/88/EC

Annex V

Annex VI

Noise: measured LWA = dB (A); guaranteed LWA = dB (A)

P = KW; L/Ø = cm

Noti ed Body:

2012/46/EU

Emission No.:

ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

SANDING

Side to Side

3 Let the motor build up

to maximum speed.

Gradually lower it

onto the workpiece

with a slight forward

movement.

4 For optimum results, use either of these strokes.

5 Upon completion of the sanding operation, remove the sander

from the workpiece and then turn off the sander.

1 Secure the material to be

sanded.

CAUTION: GUIDE THE POWER CORD DURING

SANDING TO PREVENT IT BEING CAUGHT ON THE

WORKPIECE OR OTHER OBJECTS.

Backward/ Forward

2 Firmly grasp the sander

and turn the sander on.

4. DUST CANISTER3. FITTING SANDING PAPER

KNOW YOUR PRODUCT

2. CHANGING SANDING BASES1. BEFORE USE 5. CONTROLS

1 Align the holes on the sanding sheet with the holes on the

sanding pad and then press onto the pad.

3 To empty, lift the lid of the dust

canister over a bin and then

empty.

Note: Ensure the lid is secured

tightly back onto the container

after emptying.

2 Push the dust canister

hard onto the dust

extraction port.

Note: You should hear a

click once tted correctly.

4 Push the dust canister

hard onto the dust

extraction port until it

clicks into place.

6 Random Orbital Sanding Base

7 Random Orbital Sanding

Paper x 1 (120Grit)

8 Sheet Sanding Base

9 Sheet Sanding Paper x 1

(60Grit)

10 Detail Sanding Base

11 Detail Sanding Paper x 1

(80Grit)

ACCESSORIES

1 Variable Speed Dial

2 Hook & Loop Sanding Pad

3 On/Off Switch

4 Sure Grip Handle

5 Dust Canister

MULTI SANDER

SETUP & PREPARATION OPERATION

2 Replace the sanding sheet when it is worn.

3 Replace hook &

loop backing pad

when worn (see

maintenance section).

InstallingHook and Loop Paper Fitment

Emptying

On/Off Switch

Variable Speed Dial

WARNING: THE TOOL IS RECOMMENDED FOR

USE WITH A RESIDUAL CURRENT DEVICE WITH A

RATED RESIDUAL CURRENT OF 30MA OR LESS.

WARNING: ENSURE THE TOOL IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE PERFORMING

ANY OF THE FOLLOWING OPERATIONS..

1 2 3 4 5

6 7 8 109 11

The Multi Sander comes with 3 sanding bases that can be tted to

the tool, including:

• Circular random orbital sanding base (125mm)

• Triangular detail sanding base (145x100mm)

• Rectangular 1/3 sheet sanding base (183x91mm)

Note: Before removing or tting the sanding bases, any sandpaper

must be removed so that you can access the mounting screws.

Removing Sanding Bases

Fitting Sanding Bases

1/3 Sheet Sanding Clamp System

1 Remove the 4 screws from the

base of the sanding pad by

rotating anti-clockwise.

1 Empty dust canister when it

becomes 1/3 full for optimum

dust extraction.

1 Ensure that the lid is pressed

tightly onto the container.

Note: You should hear a click

once tted correctly.

1 To switch the tool on, press the

on/off switch forward into the

on position.

1 To increase the speed of the

tool, rotate the variable speed

dial to a higher number.

2 To decrease the speed of the

tool, rotate the variable speed

dial to a lower number.

2 To stop the tool on, press the

on/off switch backward into the

off position.

1 Place the sanding base onto

the tool, aligning the mounting

holes and the aligning pins.

Note: The circular sanding base

does not require aligning pins.

1 Unhook one of the clamp

springs and insert the front of

the sand paper, ensuring the

holes in the paper align with

the holes in the pad.

The rectangular sheet sanding pad also features a clamping system

to allow for tting 1/3 sheet sanding paper that does not have hook

and loop tment.

1/3 Full

2 Pull the sanding base

and aligning pins away

from the tool to remove.

Note: The base aligning

pins can sometimes get

stuck in the base of the tool.

2 Position over a bin and

press the release tab at

the top of the lid. Then

pull the dust canister

away from the extraction

port.

2 Tighten the 4 screws into

the base of the sanding

pad to secure in place. 2 Lock the clamp spring

and repeat for the 2nd

spring, ensuring the

paper is pulled tightly.

MSK-001U

Items Supplied

Please check that the article is complete as specied in the scope

of delivery. If parts are missing, please contact our service center or

the sales outlet where you made your purchase at the latest within

5 working days after purchasing the product and upon presentation

of a valid bill of purchase. Also, refer to the warranty table in the

service information at the end of the operating instructions.

• Open the packaging and take out the equipment with care.

• Remove the packaging material and any packaging and/or

transportation braces (if available).

• Check to see if all items are supplied.

• Inspect the equipment and accessories for transport damage.

• If possible, please keep the packaging until the end of the

guarantee period.

Danger!

The equipment and packaging material are not toys. Do not let

children play with plastic bags, foils or small parts. There is a

danger of swallowing or suffocating!

Proper Use

The equipment is designed for the grinding/san ding of wood, iron,

plastic and similar materials using the appropriate grinding/sanding

paper. The machine is not suitable for wet grinding/sanding.

The equipment is to be used only for its prescribed purpose. Any

other use is deemed to be a case of misuse. The user / operator

and not the manufacturer will be liable for any damage or injuries of

any kind caused as a result of this.

Please note that our equipment has not been designed for use in

commercial, trade or industrial applications. Our warranty will be

voided if the machine is used in commercial, trade or industrial

businesses or for equivalent purposes.

Caution!

Residual risks

Even if you use this electric power tool in accordance with

instructions, certain residual risks cannot be rules out.

The following hazards may arise in connection with the

equipment’s construction and layout:

1. Lung damage if no suitable protective dust mask is used.

2. Damage to hearing if no suitable ear protection is used.

3. Health damage caused by hand-arm vibrations if the equipment

is used over a prolonged period or is not properly guided and

maintained.

Important.

The dust generated when working with the machine may be

harmful.

• Always wear goggles and a dust mask when carrying out

sanding/grinding work.

• Everybody who uses the machine or enters the workplace must

wear a dust mask.

• Do not eat, drink or smoke at the workplace.

• Do not use the machine on paints which contain lead.

WARNING: FOR HEALTH REASONS IT IS

IMPERATIVE THAT YOU USE THE DUST BAG OR A

DUST EXTRACTION SYSTEM.

Product specificaties

Merk:	Ozito
Categorie:	Schuurmachine
Model:	MSK-001U

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito MSK-001U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Schuurmachine Ozito

Ozito BSR-7000U Handleiding

16 Maart 2024

Ozito PXMSS-700U Handleiding

16 Maart 2024

Ozito TSS-3100U Handleiding

25 Juni 2023

Ozito HSS-5000U Handleiding

20 Juni 2023

Ozito QSS-1000U Handleiding

17 Juni 2023

Ozito ROS-2000U Handleiding

17 Juni 2023

Ozito ROS-4000U Handleiding

15 Juni 2023

Ozito DSR-2500U Handleiding

12 Juni 2023

Ozito MSK-001U Handleiding

11 Juni 2023

Ozito DSR-2100U Handleiding

6 Juni 2023

Handleiding Schuurmachine

Nieuwste handleidingen voor Schuurmachine

Duro Pro D-NTS 156 Handleiding

18 April 2024

Bavaria By Einhell BES 125 E Handleiding

9 April 2024

Bavaria By Einhell BBS 850 E Handleiding

9 April 2024

Bavaria By Einhell BSS 280 Handleiding

9 April 2024

Bavaria By Einhell BBS 1200 Handleiding

9 April 2024

Bavaria By Einhell BSS 105 Handleiding

9 April 2024

Einhell Bavaria BSS 105 Handleiding

25 Maart 2024

Einhell Bavaria BBS 1200 Handleiding

25 Maart 2024

Einhell Bavaria BSS 280 Handleiding

25 Maart 2024

Einhell Bavaria BBS 850 E Handleiding

25 Maart 2024