Ozito MBDS-125 Handleiding
Ozito
Schuurmachine
MBDS-125
Lees hieronder de đ handleiding in het Nederlandse voor Ozito MBDS-125 (8 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
MINI BENCH
DISC SANDER
140W Ă125MM
INSTRUCTION MANUAL
SPECIFICATIONS
Mains Voltage: 230â240V ~ 50Hz
Input Power: 140W (S2 15mins)
Max. n0: 4,000/min
Speed Settings: 6
Disc Size: Ă125mm
Weight: 2.4kg
MBDS-125
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: valve adapters
and accessories.
WARNING
The following actions will result in the warranty being void.
⢠If the tool has been operated on a supply voltage other
than that speciďŹed on the tool.
⢠If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
⢠Failure to perform maintenance as set out within the
instruction manual.
⢠If the tool is disassembled or tampered with in any way.
⢠Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head OfďŹce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The beneďŹts provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
Mini Bench Disc Sander
Angle Guide & 6 x Sanding Sheets
C-Clamp Bracket & Dust Extraction
Adaptor
1219
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
Securing The Disc Sander
This mini disc sander can be mounted vertically or horizontally onto
your bench to suit the workpiece being sanded.
1. Unwind the screw on the
C-clamp bracket so that it îżts
over your workbench.
2. Position the sander vertically or horizontally on the workbench
and slide the free end of the C-clamp bracket into the appropriate
mounting slot on the tool.
Note: Ensure the free end of the C-clamp is fully inserted into the
slot.
3. Wind up the screw on the
C-clamp to lock the sander
against your workbench.
Note: Ensure the entire surface
of the C-clamp screw is pushed
fully against the workbench.
WARNING! DO NOT TURN ON THE TOOL UNTIL THE
SCREW IS TIGHTENED SUFFICIENTLY SO THAT THE
SANDER IS UNABLE TO MOVE AROUND.
1. Dust Extraction Port
2. Power Cord
3. On/Oó°¨ Switch
4. Fence Rail
5. Mitre Fence
6. Mitre Angle Guide
7. Fence Adjustor Screw
8. Tilt Table
9. Table Adjustor Screw
10. Speed Control Dial
11. Vertical Mounting Slot
12. C-Clamp Bracket
13. Clamp Screw
14. Tilt Angle Guide
15. Angle Increment Dial
MINI BENCH DISC SANDER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1 2
10
8
1415
3
5
11
4
12
13
9
7 6
WARNING! ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Installing The Mitre Fence
1. Loosen the fence adjustor
screw.
2. Slide the fence rail into the channel on
the tilt table.
3. Tighten the adjustor screw to
lock it in place.
Dust Extraction
A vacuum hose or dust extractor can be îżtted to the dust extraction
port to help keep your work area clean while youâre sanding.
1. Align the arrow on the dust
extraction adaptor with the
arrow marking on the sander.
2. Insert the dust extraction
adaptor and turn it clockwise
to lock it in place.
3. A vacuum hose can now be îżtted to
the other end of the adaptor to remove
sanding dust and debris as you work.
4. To remove the adaptor, rotate it in the port until the arrow markings
align, then pull it out of the slot.
Note: The saw dust will travel
according to the direction of
the wheel rotation. For eó°Šcient
dust extraction, position the
workpiece on the left of the
sanding disc.
WARNING! DUST EXTRACTION SHOULD NOT BE
USED DURING METAL SANDING TO PREVENT HOT
METAL FRAGMENTS FROM ENTERING THE VACUUM
CLEANER OR DUST EXTRACTION SYSTEM.
Sandpaper Selection
Selecting the correct grit of sandpaper is an important step in
achieving optimum results. Coarse grit will remove the most material.
Finer grit will produce a smoother îżnish. The condition of the
workpiece will determine the grit of the sandpaper to be used. The
higher the grit number, the îżner the grade of sandpaper.
If the surface is rough, start with a coarse grit and sand until the
surface is uniform. Medium grit may then be used to remove
scratches left by the coarser grit. Finer grit is then used to îżnish the
surface. Always continue sanding with each grade of sandpaper until
the surface is uniform.
MATERIAL APPROPRIATE GRIT
Coarse Sanding Fine Sanding
Soft Timbers 60 240
Hardwoods 60 180
Note: If intermediate sanding is required, choose a grit rating
between coarse and îżne. The above table is intended as a guide
only. To ensure a satisfactory result, test on a scrap piece of material
to ensure the grit of sandpaper chosen is suitable for the desired
îżnish.
Replace the sand paper when it becomes worn.
2. FITTING SANDPAPER
Product specificaties
| Merk: | Ozito |
| Categorie: | Schuurmachine |
| Model: | MBDS-125 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito MBDS-125 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schuurmachine Ozito
16 Maart 2024
16 Maart 2024
25 Juni 2023
20 Juni 2023
17 Juni 2023
17 Juni 2023
15 Juni 2023
12 Juni 2023
11 Juni 2023
6 Juni 2023
Handleiding Schuurmachine
- Schuurmachine Bosch
- Schuurmachine AEG
- Schuurmachine DeWalt
- Schuurmachine Batavia
- Schuurmachine Bavaria
- Schuurmachine Black Decker
- Schuurmachine Bort
- Schuurmachine Bruder Mannesmann
- Schuurmachine Dremel
- Schuurmachine Duro
- Schuurmachine Duro Pro
- Schuurmachine Einhell
- Schuurmachine Elu
- Schuurmachine Fein
- Schuurmachine Ferm
- Schuurmachine Festool
- Schuurmachine Flex
- Schuurmachine Gamma
- Schuurmachine Gastroback
- Schuurmachine Global
- Schuurmachine Gude
- Schuurmachine Hikoki
- Schuurmachine Hitachi
- Schuurmachine Holzmann
- Schuurmachine Hyundai
- Schuurmachine Kinzo
- Schuurmachine Kress
- Schuurmachine Maestro
- Schuurmachine Makita
- Schuurmachine Maktec
- Schuurmachine Max
- Schuurmachine Metabo
- Schuurmachine Milwaukee
- Schuurmachine Parkside
- Schuurmachine Powerplus
- Schuurmachine Protool
- Schuurmachine Rupes
- Schuurmachine Ryobi
- Schuurmachine Scheppach
- Schuurmachine Silverline
- Schuurmachine Skil
- Schuurmachine Stanley
- Schuurmachine Stomer
- Schuurmachine Toledo
- Schuurmachine Toolcraft
- Schuurmachine Topcraft
- Schuurmachine Trotec
- Schuurmachine Varo
- Schuurmachine Vonroc
- Schuurmachine Westfalia
- Schuurmachine Workzone
- Schuurmachine Worx
- Schuurmachine Black And Decker
- Schuurmachine Cocraft
- Schuurmachine Meec Tools
- Schuurmachine Far Tools
- Schuurmachine Hilti
- Schuurmachine Power Craft
- Schuurmachine Tacklife
- Schuurmachine Truper
- Schuurmachine Fieldmann
- Schuurmachine Proxxon
- Schuurmachine Biltema
- Schuurmachine Porter-Cable
- Schuurmachine Probuilder
- Schuurmachine Dedra
- Schuurmachine RIDGID
- Schuurmachine Tryton
- Schuurmachine Herkules
- Schuurmachine Craftsman
- Schuurmachine Rikon
- Schuurmachine Alpha Tools
- Schuurmachine Hazet
- Schuurmachine Powertec
- Schuurmachine Meister Craft
- Schuurmachine King Craft
- Schuurmachine Toolson
- Schuurmachine Wagner SprayTech
- Schuurmachine Einhell Bavaria
- Schuurmachine McKenzie
- Schuurmachine Proviel
- Schuurmachine Ribimex
- Schuurmachine FIXIT
- Schuurmachine Ergotools Pattfield
- Schuurmachine THUN
- Schuurmachine Bavaria By Einhell
Nieuwste handleidingen voor Schuurmachine
18 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
9 April 2024
25 Maart 2024
25 Maart 2024
25 Maart 2024
25 Maart 2024