Ozito HPW-2320K Handleiding
Ozito
Hogedrukreiniger
HPW-2320K
Lees hieronder de ð handleiding in het Nederlandse voor Ozito HPW-2320K (5 pagina's) in de categorie Hogedrukreiniger. Deze handleiding was nuttig voor 8 personen en werd door 4.5 gebruikers gemiddeld met 4.0 sterren beoordeeld
Pagina 1/5
2320
PSI
HIGH PRESSURE WASHER
2000W
RELEASE
HIGH PRESSURE
WASHER
2000W 2320PSI
INSTRUCTION MANUAL
SPECIFICATIONS
Mains Voltage: 220â240V ~ 50Hz
Input Power: 2000W
Max Permissible pressure: 16MPa (2320psi)
Rated Pressure: 11MPa (1595psi)
Rated Flow: 5.6 L/min
Max. Flow: 8.0 L/min
Water Inlet Pressure: 1.2MPa (174psi) max.
Water Inlet Temp.: 50ºC max.
Noise Rating: 95db
Weight: 9.5kg
HPW-2320K
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
⢠If the tool has been operated on a supply voltage other than that speciï¬ed on the tool.
⢠If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
⢠Failure to perform maintenance as set out within the instruction manual.
⢠If the tool is disassembled or tampered with in any way.
⢠Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, VIC 3175, Australia.
ozito.com.au
High Pressure Washer
Spray Gun, High Pressure Hose,
Lance, Extension Lance,Hose Reel,
Turbo Nozzle, Adjustable Spray
Nozzle, Patio Cleaner & Foam Bottle
2 x Wheels, Hose Reel, Handle, 6 x
Screws, Accessory Holder, Cable
Hook, Cleaning Needle & Water
Coupling with Filter
0523
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The beneï¬ts provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
2320
PSI
HIGH PRESSURE WASHER
2000W
RELEASE
1. Transport Handle
2. Power Cord Hook
3. Adaptor Holder
4. Foam Bottle Holder
5. Spray Gun Holder
6. On/Off Dial
7. Water Inlet Port
8. Transport Wheels
HIGH PRESSURE WASHER
ACCESSORIES
A)
B)
C)
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
9. Spray Gun
A) Hose Release Trigger
B) Spray Trigger
C) Trigger Lock
10. High Pressure Hose
11. Patio Cleaner
12. Foam Bottle
13. Water Coupling
14. Turbo Nozzle
15. Adjustable Spray Nozzle
16. Lance
17. Extension Lance
18. Hose Reel
1
6
7
5
3
4
2
8
13
14
17
16
15
18
9
10
11
12
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Attaching The Transport Handle
1. Slide the base of the
transport handle into the
tabs on the top of the unit.
2. Insert the two screws
(supplied) through the tabs
and into the handle.
3. Using a phillips head
screwdriver, tighten the
screws into place.
Attaching The Spray Gun Holder Holder & Power Cord
Hook
1. Slide the spray gun holder onto
the slots on one side of the unit
until it clicks into place.
2. Slide the power cord hook onto
the slot on the other side of the
unit until it too clicks into place.
Attaching The Hose Reel
1. Install the high pressure hose reel
to the pack of the appliance with
four screws.
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
2. ACCESSORIES
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
WARNING! THIS PRODUCT MUST NOT BE CONNECTED
TO THE POTABLE WATER MAINS WITHOUT BACKFLOW
PREVENTION. CHECK LOCAL AND NATIONAL
PLUMBING REGULATIONS BEFORE CONNECTING THE
MACHINE TO THE POTABLE WATER MAINS.
Connecting The Water Supply
This pressure washer requires a pressurised water source with
a maximum pressure of 1MPa (145psi). It is recommended that
a reinforced garden hose (with minimum diameter of 12mm) is
used for the inlet connection. It cannot be used with a bucket and
siphon.
WARNING! RUN WATER THROUGH THE GARDEN HOSE
BEFORE ATTACHING IT TO THE PRESSURE WASHER TO
PREVENT ANY SAND OR DIRT FROM ENTERING THE
UNIT.
1. Place the mesh inlet ï¬lter
into the water coupling and
then screw this onto the
water inlet port located on
the front of the machine.
Note: The mesh inlet ï¬lter must be in place to prevent impurities in
the water source from entering the unit and damaging the pump.
WARNING! ENSURE THE GARDEN HOSE IS
ADEQUATELY RATED AND SUFFICIENTLY LONG FOR
THE INTENDED APPLICATION.
2. Push the standard quick
coupling adaptor on the end
of the garden hose onto the
hose adaptor on the pressure
washer until it clicks into
place.
Note: The standard 12mm quick coupling adaptor should be used.
3. Pull gently on the hose to ensure the connection is secure.
Connecting The Pressure Hose
1. Push the ï¬at end of the high
pressure hose into the water
outlet port and screw it
clockwise into place.
Attaching The Spray Gun & Accessories
1. Push the desired accessory
into the spray gun lance and
twist clockwise to lock it into
place.
Note: If a longer reach is required, connect the extension lance to
the spray gun lance, and attach the desired accessory to the free
end of the extension lance.
2. Push the patio cleaner into the extension lance and twist
clockwise to lock it into place.
3. To disconnect the accessory, push the accessory towards the
spray gun, twist the accessory counter clockwise and pull it.
3. Push the end of the pressure
hose into the inlet port on the
spray gun until it clicks into
place.
4. Tug gently on the pressure hose to check that it is inserted
correctly.
WARNING! PRESSURISED WATER. SHUT OFF WATER
SUPPLY, TURN OFF UNIT AND SQUEEZE THE SPRAY
GUN TRIGGER TO RELIEVE THE PRESSURE BEFORE
DISCONNECTING THE HIGH PRESSURE HOSE.
5. To disconnect the spray gun,
press and hold down the
quick release tab and pull
out the pressure hose.
a.
b.
a.
b.
RELEASE
a.
b.
RELEASE
RELEASE
a.
b.
Product specificaties
| Merk: | Ozito |
| Categorie: | Hogedrukreiniger |
| Model: | HPW-2320K |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito HPW-2320K stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hogedrukreiniger Ozito
9 Juni 2025
9 Maart 2025
8 April 2024
12 Juni 2023
17 Mei 2023
9 Mei 2023
11 Maart 2023
Handleiding Hogedrukreiniger
- Hogedrukreiniger Cocraft
- Hogedrukreiniger Husqvarna
- Hogedrukreiniger Gamma
- Hogedrukreiniger Draper
- Hogedrukreiniger MotorScrubber
- Hogedrukreiniger Stihl
- Hogedrukreiniger Generac
- Hogedrukreiniger Karcher
- Hogedrukreiniger Craftsman
- Hogedrukreiniger Snow Joe
- Hogedrukreiniger Anova
- Hogedrukreiniger Nilfisk
- Hogedrukreiniger Sencor
- Hogedrukreiniger Neo
- Hogedrukreiniger Gerni
Nieuwste handleidingen voor Hogedrukreiniger
7 Juni 2025
6 Juni 2025
5 Juni 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025