Ozito BDP-450 Handleiding
Ozito
Boormachine
BDP-450
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito BDP-450 (8 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
PEDESTAL
DRILL PRESS
450W
INSTRUCTION MANUAL
SPECIFICATIONS
Mains Voltage: 230–240V ~ 50Hz
Power: 300W (S1);
450W (S6 20%)
No Load Speed: 600 - 2,650/min
Chuck: Ø13mm Keyed
B16 Morse Taper
Chuck Size: Ø1.5 - 13mm
Max. Drilling Depth: 50mm
Table Tilt: 0-450 (Left & Right)
Weight: 13kg
BDP-450
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
Head Assembly, Table, Baseplate &
Main Column
Chuck Guard, Guard Arm, 3 x Feed
Wheel Handles & Belt Tension
Handle
Chuck, Chuck Key, 3 x Column Bolts
& 2 x Hex Keys
0622
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Assembling The Drill Press
1. Carefully remove the contents from the packaging.
2. Select a firm, level surface on which to assemble the drill press.
3. Align the holes on the base
of the main column with the
holes in the baseplate.
4. Place a washer onto each of
the 3 column bolts and use
these to fasten the column
into place; use an M10
wrench to tighten securely.
5. Rotate the table lever anti-clockwise
to loosen the collar.
6. Slide the table collar onto
the column and secure
at the desired position by
tightening the collar bolt.
7. Place the motor unit on the
main column and use a 4mm
hex key to tighten the grub
screw on the side of the
motor unit.
8. Screw the 3 feed wheel
handles into the slots on the
feed wheel hub.
9. Screw the belt tension handle into
the slot on the belt tension hub.
1. Belt Tension Lever
2. On/Off Switch
3. Guard Arm Lock
4. Guard Arm
5. Pulley Cover
6. Motor
7. Main Column
8. Table Lever
9. Baseplate
10. Table Tilt Bolt
11. Table
12. Chuck Guard
13. Guard Locking Screw
14. Keyed Chuck
15. Depth Indicator Lock
16. Motor Locking Screw
17. Chuck Key Holder
18. Feed Wheel Handle
19. Pulley Cover Lock
PEDESTAL DRILL PRESS
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
2
3
4
7
8
6
5
19
1
18
17
16
14
15
13
12
11
10
9
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Installing The Chuck & Chuck Guard
1. With the chuck jaws fully
retracted into the chuck,
align the chuck with the
spindle and place it the drill
table.
2. Raise the table until the
chuck is approximately
25mm from the spindle.
Note: Use a piece of timber to protect the chuck and avoid
scratches.
3. Use the feed wheel handles
to slowly lower the spindle
until the chuck is pushed
securely onto the spindle.
Note: A gentle tap on the
timber is required to secure the
keyed chuck onto the tapered
drive shaft
4. Remove the 2 screws on the side of the guard
arm with a screwdriver (not supplied) and slide
it into the arm holder on the motor unit.
Note: Ensure the 2 screws and guard arm lock
knob will face the user when reassembled.
5. Tighten the stop screw.
6. Align the holes on the chuck
guard with the holes on the
guard arm and refit the 2
removed screws to hold the
guard in place.
7. Use the guard locking screw to
lock the guard arm in the desired
position.
Attaching A Drill Bit
1. Swing the chuck guard out
of the way.
2. Push the chuck key into
any of the holes in the side
of the chuck and turn it
anti-clockwise to loosen the
chuck jaws.
3. Insert the drill bit fully into
the chuck.
4. Hold the drill bit in one hand
and rotate the chuck key
clockwise to tighten the jaws
around the drill bit.
Note: Ensure drill bit is straight
before fully tightening.
Note: Tighten the chuck jaws
from all 3 holes with the chuck key fasten the drill bit securely.
5. Swing the chuck guard back
into place and store the
chuck key in the holder on
the side of the motor unit.
25mm
a.
b.
Product specificaties
| Merk: | Ozito |
| Categorie: | Boormachine |
| Model: | BDP-450 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito BDP-450 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Boormachine Ozito
26 Juli 2023
30 Juni 2023
19 Juni 2023
14 Juni 2023
14 Juni 2023
14 Juni 2023
14 Juni 2023
8 Juni 2023
24 Mei 2023
23 Mei 2023
Handleiding Boormachine
- Boormachine Bosch
- Boormachine IKEA
- Boormachine Panasonic
- Boormachine AEG
- Boormachine DeWalt
- Boormachine Baier
- Boormachine Basetech
- Boormachine Batavia
- Boormachine Bavaria
- Boormachine Berner
- Boormachine Black Decker
- Boormachine Blucave
- Boormachine Bort
- Boormachine Bruder Mannesmann
- Boormachine Defort
- Boormachine Delta
- Boormachine Dremel
- Boormachine Duro
- Boormachine Ecomac
- Boormachine Economy
- Boormachine Einhell
- Boormachine Elu
- Boormachine Fe Powertools
- Boormachine Fein
- Boormachine Felisatti
- Boormachine Ferm
- Boormachine Ferrex
- Boormachine Festool
- Boormachine Flex
- Boormachine Gamma
- Boormachine Global
- Boormachine Gude
- Boormachine Hikoki
- Boormachine Hitachi
- Boormachine Holzmann
- Boormachine Huvema
- Boormachine Hyundai
- Boormachine Kawasaki
- Boormachine Kinzo
- Boormachine Kress
- Boormachine Laserliner
- Boormachine Lux Tools
- Boormachine Luxor
- Boormachine Maestro
- Boormachine Makita
- Boormachine Maktec
- Boormachine Max
- Boormachine Metabo
- Boormachine Milwaukee
- Boormachine Parkside
- Boormachine Powerfix
- Boormachine Powerplus
- Boormachine Protool
- Boormachine Robust
- Boormachine Rupes
- Boormachine Ryobi
- Boormachine Scheppach
- Boormachine Silverline
- Boormachine Skil
- Boormachine Spit
- Boormachine Stanley
- Boormachine Stihl
- Boormachine Stomer
- Boormachine Tanaka
- Boormachine Texas
- Boormachine Toolcraft
- Boormachine Toolland
- Boormachine Topcraft
- Boormachine Trotec
- Boormachine Varo
- Boormachine Velleman
- Boormachine Vonroc
- Boormachine Westfalia
- Boormachine Workzone
- Boormachine Worx
- Boormachine Wurth
- Boormachine Zipper
- Boormachine Black And Decker
- Boormachine Steren
- Boormachine Cocraft
- Boormachine Meec Tools
- Boormachine Genesis
- Boormachine Carat
- Boormachine Eibenstock
- Boormachine Hilti
- Boormachine Cotech
- Boormachine Power Craft
- Boormachine Tacklife
- Boormachine Truper
- Boormachine Fieldmann
- Boormachine Proxxon
- Boormachine Biltema
- Boormachine Malmbergs
- Boormachine Porter-Cable
- Boormachine Sun Joe
- Boormachine Dedra
- Boormachine Graphite
- Boormachine Narex
- Boormachine RIDGID
- Boormachine Tryton
- Boormachine Herkules
- Boormachine Sthor
- Boormachine Craftsman
- Boormachine Rikon
- Boormachine Verto
- Boormachine Alpha Tools
- Boormachine Hazet
- Boormachine G-Technology
- Boormachine Yato
- Boormachine Baumr-AG
- Boormachine Powerblade
- Boormachine Meister Craft
- Boormachine Wolfcraft
- Boormachine Kreg
- Boormachine Rok
- Boormachine RUKO
- Boormachine Einhell Bavaria
- Boormachine Ribimex
- Boormachine Ergotools Pattfield
- Boormachine MyTool
- Boormachine Rodcraft
- Boormachine Bavaria By Einhell
Nieuwste handleidingen voor Boormachine
16 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024