Ouellet OTH5007 Handleiding

Bekijk gratis de handleiding van Ouellet OTH5007 (2 pagina’s), behorend tot de categorie Thermostaat. Deze gids werd als nuttig beoordeeld door 24 mensen en kreeg gemiddeld 4.6 sterren uit 8 reviews. Heb je een vraag over Ouellet OTH5007 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Your thermostat OTH2750 / OTH4000 / OTH5007

The installation of this thermostat should be made by a

certified electrician and must be installed in conformity with

the national and local Electrical Codes.

L1

L2/N

Since you are a valuable customer, before

starting the installation of your new thermostat,

please make sure that the breakers for your

heating system are off at the main electrical

panel!

Note: The wires of this thermostat are non-polarized.

The thermostat must be installed in

series with your heating device.

Connecting the thermostat directly

to the line voltage source will

damage the unit.

OTH2750 (2750 W @ 240 VAC)

OTH4000 (4000 W @ 240 VAC)

OTH5007 (5000 W @ 347 VAC)

Non-programmable thermostat

Install your thermostat

Note: For a forced-air

heater, go to the

''Advanced Settings''

section to change the

control cycle of the

thermostat.

4

4

4

44

3

3

3

33

1

1

1

11

5

5

5

55

2

2

2

22

!

Remove your old

thermostat. It should be

connected to 2 wires.

User's guide

Warnings

Setpoint Temperature

Room Temperature

Heating indicator

Unlock and lift

the thermostat cover.

Use the two screws to

secure the thermostat

to the electrical box.

Use the provided connectors to

connect the two wires of the

thermostat to the wires previously

connected to your old thermostat.

Make sure to firmly tighten the wire connectors for a secure

connections. A loose connection can be a fire hazard.

Special CO/ALR solderless connectors must be used when

connecting with aluminum conductors.

Replace the

cover and lock.

Power up the

thermostat.

Product specificaties