OSD Audio ACE600ST Handleiding


Pagina's 2 Engels Speaker

Bekijk de handleiding van OSD Audio ACE600ST gratis online of download de PDF. 17 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

ACE600ST INSTALL GUIDE
Preparation:
Installation:
Tools For InstallationSpeaker Wire Guide
Considerations
Cut Out
- Pencil
- Drill
- Wire Cutter
- Phillips Screwdriver
- Utility Knife
- Safety Eye Wear
- Gloves
- Sandpaper
- Where is the best place to install the speakers?
- Where do the speakers sound the best?
- Separate the speakers 6 - 10 feet apart.
NOTE: This is the most important part of the entire installation.
If you are not certain whether any obstructions exist behind the
desired mounting area, you should start by cutting a small hole in
the center of your penciled mounting hole with a drywall saw.
Trace along the included template. Cut along the traced line using a
drywall saw or rotary drill. Use a piece of sandpaper to sand down the
cut out edge for a smoother contour. (See Diagram 1.)
18AWG minimum - for distances up to …………………. 10 ft
16AWG - from …………………………………..…... 10 to 50 ft
14AWG - from …………………………………...… 50 to 100 ft
Diagram 1
Mounting
Tighten the mounting brackets by simply turning the screws on
the front of the speaker bafe slowly clockwise. The quick-turn
mounting system and frame will “sandwich” or clamp around the
dry-wall to hold the speaker securely in place once fully tightened
to the locked position.
(See Diagram 2.)
Open PositionLocked Position
Diagram 2

Beoordeel deze handleiding


Product specificaties

Merk: OSD Audio
Categorie: Speaker
Model: ACE600ST

Heb je hulp nodig?

Als je hulp nodig hebt met OSD Audio ACE600ST stel dan hieronder een vraag en andere gebruikers zullen je antwoorden