Oricom VISO10 Handleiding

Bekijk gratis de handleiding van Oricom VISO10 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.5 sterren uit 4 reviews. Heb je een vraag over Oricom VISO10 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

3

2

PaPart A- LCDrt B- Buon

A1: Day of the Week

A2: Radio Control Icon

A3: Time

A4: Month

A5: Date

A6: Year

B1: “MODE/”Buon

B2: “▼” Buon

B3: “RESET” Buon

B4: “▲” Buon

B5: “WAVE/” Buon

Part C- Structure

C1: Hanging Hole

C2: DoorBaery

C3: Stand

1

VISO10 User Manual

1. Features

- and Understand Time displayEasy toRead

- Calendar PerpetualUp to Year 2099

- & 8 languages Day of weekMonth inuser

selectable

2. Unit Appearance

5. Lock buttons

● Hold “” (B4) buon at the same me for ▼ ▲” (B2) and “

5 seconds to lock the rest buons. When rest buons’

funcons been locked, icon “ ” displayed. Hold “▼”

(B2) and “▲” (B4) buon 5 seconds again to unlock.

6. Precauons

7. Express Warranty (Australia)

This Express Warranty is provided by Oricom Internaonal Pty

Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South

Windsor NSW 2756, herein aer referred to as “Oricom”.

Oricom products come with guarantees that cannot be exclud-

ed under the Australian Consumer Law. You are entled to a

replacement or refund for a major failure and compensaon

for any other reasonably foreseeable loss or damage. You are

also entled to have the goods repaired or replaced if the

goods fail to be of acceptable quality and the failure does not

amount to a major failure.

3. Getng started:

● Open the battery Cover (C2).

● Insert 2 x AA size alkaline batteries observing polarity [“+”

and “–“marks]. There is “click” sound when insert batteries

to remind user the batteries was inserted correctly.

● Replace the battery compartment cover.

● Place the unit onto flat surface; the unit is ready for

use now.

4. Time Setng

4.1 Manual Time Setng:

● In me display, hold “MODE/ ” buon (B1) for 3

seconds to enter Clock/Calendar seng Mode.

● The seng sequence is shown as follow:, Weekday & Month

Language, 12/24 Hr, RCC (Radio Clock) ON/OFF, Time Zone,

Hour, Minute, Year, Month, Day, DST.

● There are 8 languages, English, German, French, Spanish,

Italian, Dutch, Polish and Swedish, for day-of-week & Month.

● Press “” (B2) or “▼ ▲” (B4) buon to adjust the seng and

press “MODE” buon (B1) to confirm each seng.

● (By keeping the “” (B2) or “▼ ▲” (B4) buon pressed, could

accelerate the process and reach the desired value more

quickly)

To do this:

1) In me display, hold “MODE/ ” Buon (B1) for

3 seconds to enter Clock/Calendar seng Mode.

2) Press “” (B2) or “▼ ▲” (B4) buon to navigate to the

RCC (Radio Clock) ON/OFF seng.

3) Ensure that RCC is set to RCC OFF inside of Australia.

4) Confirm the selecon by clicking the “MODE/ ”

Buon (B1).

4.2 Radio Controlled Time:

● The Radio Controlled Time seng on the VISO10 will not

work in Australia. Ensure this is turned off in the sengs.

● The clock loses its me informaon when the baery is

removed.

● Use a pin to press the reset buon if the Unit does not

work properly.

● Do not expose it to direct sunlight, heavy heat, cold, high

humidity or wet areas.

● Never clean the device using abrasive or corrosive materials

or products. Abrasive cleaning agents may scratch plasc

parts and corrode electronic circuits.

Product specificaties