Oricom ANU1200 Handleiding

Bekijk gratis de handleiding van Oricom ANU1200 (2 pagina’s), behorend tot de categorie Radio. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.1 sterren uit 9 reviews. Heb je een vraag over Oricom ANU1200 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Contact Details for Oricom Support and

Warranty claims in Australia

Oricom International Pty Ltd

Unit 1, 4 Sovereign Place

South Windsor, NSW 2756 Australia

Email: supp[email protected] Phone:

1300 889 785 or (02) 4574 8888

(Monday to Friday 8am to 6pm AEST)

Web: www.oricom.com.au

Fax: (02) 4574 8898

Contact details for Oricom Support and

WarrantyClaims in New Zealand

Email: suppo[email protected]

Phone: 0800 674 266

(Monday to Friday 10am to 8pm NZST)

Web: www.oricom.co.nz

ORICOM UHF CB ANTENNAANU 1200 USER GUIDE 20160309

USER GUIDE - ORICOM ANTENNAANU1200

1)

2) Install the 0.43m 3dBi and base pole (Stubbie Antenna) onto the

bracket (not supplied).Tighten indirection,a clockwise using a hexagon

wrench or spanner. IMPORTANT: Do not exceed 50N

MAX:50N

4)

3)Remove the cap from the 3dBi Stubbie antenna by turing in an anti-

clockwise direction. *IMPORTANT: Place the cap in a safe place - always

operate the 3dBi Stubbie antena with the cap fitted.

ANU Pack Includes:1200

12

43

Install the Fiberglass extension pole onto the base by turning in a clockwise

direction and secure in place with the grub screw (using the hex key

provided). Hand tighten only MAX. 15N

Is are.mage for illustration purposes only

Installation

•UHF CB Antenna (3dBi) with 0.43m* heavy duty

fiberglass pole and custom spring base

•1m Fiberglass extension pole to convert antenna

to a 1.4m 6.5dBi high gain antenna

•Includes grub screw and hex key to secure the

fiberglass pole.

Remove the shroud protecting the cable at the base of the antenna

Remove this plastic shroud

To convert to a 1.4m 6dBi gain antenna

MAX:15N

*

Product specificaties