Oregon Scientific BAR 938HG Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Oregon Scientific BAR 938HG (61 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/61
Cable free Weather Station
Model: BAR938HG
User Manual
GB
1
I TEMPERATURE WINDOW
Shows the current temperature or the maximum or minimum
recorded temperature
J IN/OUT - REMOTE INDICATOR
Indicates if the current reading is displayed as indoor or outdoor-
remote
K TEMPERATURE TREND ARROWS
Indicates the trend of temperature changes
CABLE FREE WEATHER STATION
MODEL: BAR938HG
USER’S MANUAL
INTRODUCTION
Congratulations on your purchase of the BAR938HG Top Weather
Station.
BAR938HG is an all-in-one clock and weather device. RF- control-
led, it can automatically synchronize its current time and date when
it is brought within an approximate 1500km radius of the radio signal
generated from Frankfurt, Germany (DCF77).
BAR938HG does weather forecasts with kinetic-movement graphic
illustrations and tells indoor and outdoor temperature. It also shows
the trend of changes plus the recorded maximum and minimum
temperatures.
Apart from temperature, BAR938HG shows the indoor and outdoor
relative humidity and rates the comfort level. It also retains the
maximum and minimum relative humidity readings. A remote
thermo-hygro sensor is included with the unit. BAR938HG is able
to receive and display readings from up to 3 remote sensors.
The built-in barometer enables BAR938HG to display the atmos-
pheric pressure with user-selectable altitude adjustment. A bar graph
will show the pressure trend of the last 24 hours.
What is more, BAR938HG is equipped with a moon phase scanner,
which lets you check the moon phase of any day between 1990 and 2089.
Other features include a HiGlo backlight, daily crescendo alarm with
eight-minute snooze function, and extra-large display.
No wire installation is required between the main and remote units.
As BAR938HG operates at 433MHz, it can be used in the U.S. and
most places in Continental Europe.
MAIN FEATURES: MAIN UNIT
A RADIO RECEPTION SIGNAL
Indicates the condition of radio reception
B SNOOZE / LIGHT BUTTON
Activates the snooze function when an alarm goes off or turn
on the backlight for five seconds
C CLOCK WINDOW
Displays the current time and date
D ALARM ON ICON
Appears when the alarm is activated
E ALARM ICON
Appears when the alarm time is displayed
F MAIN UNIT BATTERY LOW (BATT) INDICATOR
Lights up and blinks when the batteries of the main unit are
running dry
G REMOTE UNIT BATTERY LOW (BATT)
INDICATOR
Lights up when the batteries of the remote unit are running
dry
H WEATHER FORECAST WINDOW
Displays the weather pattern
GB
2
L°C/°F SLIDE SWITCH
Selects between Centigrade (°C) and Fahrenheit (°F) display
M RELATIVE HUMIDITY WINDOW
Displays the relative humidity
N COMFORT INDICATOR
Indicates the comfort level
O ATMOSPHERIC PRESSURE CHART
Shows the atmospheric pressure trend chart of the last 24
hours
P ATMOSPHERIC PRESSURE WINDOW
Displays the current atmospheric pressure
Q PRESSURE HISTORY INDICATOR
Indicates the pressure history of previous hours
R PRESSURE UNIT SLIDE SWITCH
Selects between mb/hPa and inHg display
S MOON PHASE SCANNER
Displays the current moon phase or that of the date checked
T CHANNEL BUTTON
Selects among indoor & channel 1, 2, 3 or to enter auto scan
mode
U MEMORY BUTTON
Displays the maximum or minimum temperature and relative
humidity or erases the memory
V HISTORY BUTTON
Selects the pressure history of previous hours
W UP ( ) AND DOWN ( ) BUTTONS
Increases or decreases the value of a setting, scan the
moonphase status and toggle the alarm status
X ALARM / BUTTON
Displays the alarm time
Y MODE BUTTON
Changes the display mode of the clock or triggers the clock
setting mode
Z RESET BUTTON
Resets the unit by returning all settings to their default
values
AA
BATTERY COMPARTMENT
Accommodates four UM3 or AA-size batteries
AB
TABLE AND CONTROL STAND
Acts as control panel and supports the unit when lying flat.
AC
LOCK SLIDE BUTTON
Slide to the right to lock the 2 panels
AD
UNLOCK BUTTON
Press to release the lock
MAIN FEATURES: REMOTE UNIT
MODEL THGR228N
a Two-line LCD
Displays the current temperature and humidity monitored by
the remote unit
b LED indicator
Flashes when the remote unit transmits a reading
c°C/°F slide switch
Selects between Centigrade ( C) and Fahrenheit (° °F)
d Channel slide switch
Designates the remote unit Channel 1, Channel 2 or
Channel 3
e RESET
Returns all settings to default values
f Battery compartment
Accommodates two AAA-size batteries
g Battery door
h Wall-mount holder
Supports the remote unit in wall-mounting
i Removable table stand
For standing the remote unit on a flat surface
BEFORE YOU BEGIN
For best operation,
1. Insert batteries for remote units before doing so for the main
unit.
2. Position the remote unit and main unit within effective trans-
mission range, which, in usual circumstances, is 30 meters.
Though the remote unit is weather proof, it should be placed away
from direct sunlight, rain or snow.
BATTERY AND CHANNEL
INSTALLATION: REMOTE UNIT
The remote thermo-hygro sensor unit uses two (2) UM-4 or “AAA”
size alkaline batteries.
Follow these steps to install / replace batteries:
1. Remove the screws on the battery compartment.
2. Select the channel number on the slide switch.CHANNEL
3. Select the temperature display unit on the °C/°F slide switch.


Product specificaties

Merk: Oregon Scientific
Categorie: Weerstation
Model: BAR 938HG

Heb je hulp nodig?

Als je hulp nodig hebt met Oregon Scientific BAR 938HG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weerstation Oregon Scientific

Handleiding Weerstation

Nieuwste handleidingen voor Weerstation