Optoma WHD221 Handleiding

Bekijk gratis de handleiding van Optoma WHD221 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 9 reviews. Heb je een vraag over Optoma WHD221 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

2/103/104/105/10

WHD221

Basic User Manual

*The product images shown are for illustration purposes only and may

not be an exact representation of the product.

Optoma reserves the right to change product images and specifications

at any time without notice.

Pairing/配對/配对

Installation/安裝/安装

HDMI

USB 5V/1A

USB 5V/1A

Computer / Phone

Receiver (RX)

接收端接收端/

Transmitter (TX)

發送端发送端/

Receiver (RX)

接收端连接显示设备

接收端連接顯示設備

Computer / Phone

Transmitter (TX)

发送端连接电脑/手机

發送端連接電腦/手機

TXRX

For access to the setup information, user manual,

product updates, and Warranty Information –

please scan the QR Code or visit the following

URL: https://www.optoma.com/support/download

1

Receiver (RX)

接收端的连接显示设备，需外接电源HDMIUSB

接收端的連接顯示設備，需外接電源HDMIUSB

1

Receiver (RX), press 2 seconds

接收端长按秒，画面将显示等待配对的界面2

接收端長按秒，畫面將顯示等待配對的介面2

3

Automatically Connected.

接收端和发送端自动连接后开启投屏

接收端和發送端自動連線後開啟投影螢幕

Transmitter (TX), press 5 seconds

发送端长按5秒，开始进行配对

發送端長按5秒，開始進行配對

2

Transmitter (TX)

发送端连接电脑/手机TYPE-C

發送端連接電腦/手機TYPE-C

3

Paired

配对成功后，可开启投屏

配對成功後，可開啟投影螢幕

注:包装内含接收端*1、发送端*1，需同时

使用才能开启投屏

註:包裝內含接收端*1、發送端*1，需同時

使用才能開啟投影螢幕

4

Receiver(RX), ready to pair

接收端的显示设备显示”Ready to Pair”

接收端的顯示設備顯示”Ready to Pair”

2

USB 5V/1A

Ready to Pair

Receiver

(RX)

Transmitter

(TX)

2SECS

Computer / Phone

Computer / Phone

TYPE-C

Computer / Phone

TYPE-C

Computer / Phone

5SECS

Transmitter

Antenna: 1T1R (on board)

Wi-Fi: 5.1GHz

Interface: TYPE-C

NCC 警語

取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或

變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾

現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之

無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

FCC statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference (2) this device must

accept any interference received, including interference that may cause undesired

operation.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this product not authorized by the party could void the

electromagnetic compatibility (EMC) and wireless compliance and negate your authority

to operate the product. This product has demonstrated EMC compliance under

conditions that included the use of compliant peripheral devices and shielded cables

between system components. It is important that you use compliant peripheral devices

and shielded cables between system components to reduce the possibility of causing

interference to radios, television sets, and other electronic devices.

RF Exposure Statement (Receiver):

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be

installed and operated with minimum distance of 20cm the radiator your body. This

device and its antenna(s) must not be co-located or operation in conjunction with any

other antenna or transmitter.

SAR statement (Transmitter):

This device meets the government's requirements for exposure to radio waves. This

device is designed and manufactured not to exceed the emission limits for exposure to

radio frequency (RF) energy set by the Federal Communications Commission of the U.S.

Government.

The SAR limit set by the FCC is 1.6W/Kg. For body-worn operation, this device has been

tested and meets the FCC RF exposure guidelines for use with an accessory that

contains no metal and positions the device a minimum of 0mm from the body. RF

exposure compliance with any body-worn accessory that contains metal was not tested

and certified. And use of such body-worn accessory should be avoided. Accessory

available in market and must be used to keep use distance 0mm from EUT to

body-worn operation.

Receiver

Antenna: 1T1R (on board)

Wi-Fi: 5.1GHz

Interface: HDMI

Product Information

Product Name: WHD221()無線同屏器

Product Model: WHD221 Transmitter / WHD221 Receiver

产品名称 / 型号 / 產品名稱 / 型號 : WHD221

Product specificaties