Olympus VN-3100PC Handleiding

Olympus Voice recorder VN-3100PC

Lees hieronder de 📖 handleiding in het Nederlandse voor Olympus VN-3100PC (2 pagina's) in de categorie Voice recorder. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

BZ8174-02-INST-E1 2006.06.30

sYou can switch the time indication between the 12-hour system and the 24-hour system by pressing the

DISPLAY/MENU button while you are setting the hour or minute.

sYou can change the order of the date indication by pressing the DISPLAY/MENU button while you are

setting the year, month, or day.

(Example: June 14, 2006)

- -

4Hold

Set the HOLD switch to the HOLD position.

All operation buttons are disabled. This feature is

useful when the recorder has to be carried in a

handbag or pocket.

Remember to reset the HOLD switch before

attempting to use the recorder.

Notes

sThe alarm will sound at the scheduled time even if

the recorder is set to HOLD. The recorder will then

begin to play the file associated with the alarm once

you press any button (Excluded VN-1100/VN-

1100PC).

sThe recorder functions as follows with the HOLD

switch set to the HOLD position:

–If the recorder is playing, the display goes dark

when playback of the current file has completed.

–

If the recorder is recording, the display goes dark

when the recorder stops recording automatically

upon running out of free memory.

E1-BZ8174-02

AP0607

Current folder

4To Pause Recording

To Pause

Press the REC button during recording.

➥“PAUSE” appears on the display and the record/play indicator

light flashes.

To Resume Recording

Press the REC button again.

➥Recording will resume at the point of interruption.

Notes

sIf “FULL” appears on the display, you cannot record in the selected folder. In such a case, erase

unnecessary files or download to PC (VN-1100PC/VN-2100PC/VN-3100PC).

sIf the recorder is placed directly on a table when recording a meeting, it tends to pick up table vibrations.

Put a notebook or other item between the table and the recorder so that the vibration is not easily

transmitted for clearer recording.

sEven if you press the DISPLAY button, the display will not change to current recording time if the

remaining recording time is 5 minutes or less.

sWhen remaining recording time falls to 1 minute or less, the Record/play indicator light flashes red.

sThe recorder will enter Stop mode if it has been left paused for 60 minutes or longer.

sIn case of difficult acoustic conditions or low speaker’s voice, recording in XHQ or HQ is recommended.

Also, usage of an external microphone (sold separately) could improve the quality of recordings.

sThe input level cannot be adjusted on this recorder. When you connect the recorder to an external

device, execute a test recording and adjust the output level of the external device.

Lightly press down on the

arrow and slide the battery

cover open.

Insert two size-AAA alkaline

batteries, observing the correct

polarity.

Close the battery cover

completely.

Time/Date screen appears. The hour

indicator flashes, indicating the start of the

Time/Date setup process. (See “Setting

Time/Date (TIME)” for details)

An optional Ni-MH Rechargeable Battery (BR401) from Olympus can be used for the recorder.

Replacing Batteries

When appears on the display, replace the batteries as soon as possible. Size-AAA alkaline

batteries are recommended. When the batteries are depleted, appears on the display, and the

recorder shuts off. It is recommended to set the HOLD switch to the HOLD position before you replace

batteries to maintain the current settings (Time/Date, etc.). For your convenience,the recorder also

logs the current settings in nonvolatile memory at hourly intervals.

4Inserting Batteries

Press and hold the MENU

button for 1 second or longer.

Press the + or – button until

“TIME” flashes on the

display.

Press the PLAY button.

The hour indicator flashes.

Press the + or – button to set

the hour.

Press the PLAY or 9

button to accept the minute.

The minute indicator flashes.

Pressing the 0 button enables the hour

setting again.

Press the + or – button to set

the minute.

Repeat steps 5 and 6 to continue to set

the year, month and date in the same way.

After setting the date, press

the PLAY or 9 button.

This completes the time/date setup

procedure.

4Setting Time/Date (TIME)

If you have set the time and date, information as to when a sound file was recorded is

stored automatically with that file.

When you install batteries for the first time or each time you replace the batteries, the

hour indication will flash. In such a case, be sure to set the time and date by following

steps 4 through 7 described below.

4Notes on the Folders

The recorder provides four folders, A, B, C, and D (D is for VN-2100/

VN-2100PC/VN-3100/VN-3100PC only).

To change the folder selection, press the FOLDER button while the

recorder is stopped. Each recorded file is stored in a folder. Using folders

to classify files makes it convenient to find files you want to access

later. Up to a total of 100 files can be recorded in each folder.

Recording from External Microphone or Other Devices

The external microphone and other devices can be connected and

the sound can be recorded.

sWhen the external microphone is connected to the microphone jack of the

recorder, the built-in microphone will not operate.

sWhen using an external microphone, choose adequate microphone, such as a

Noise-Cancellation microphone or Electret condenser microphone (optional).

sWhen connecting an external equipment, use the connecting cord KA333 (optional).

4How to Use the

Strap

4Power Supply

The HOLD switch functions as a power button. When you

do not use the recorder, set the HOLD switch to the HOLD

position while the recorder is stopped. This will power off

the recorder and minimize the battery drain.

Power on…Reset the HOLD switch.

Power off…Set the HOLD switch to the HOLD position.

Standby Mode and Display Shut Off

If the recorder is stopped or paused for 60 minutes or longer during recording or play back,

it goes into Standby (power-save) mode, and the display shuts off. To exit Standby mode

and turn on the display, press any button.

Earphone jack

Microphone jack

Strap hole

4LCD Display Information

You can select an option for the display of the recorder. This help review and confirm different

recorder settings and file information.

RecordingGetting Started Playing Back

Press the FOLDER button to

select the desired folder.

Press the 9 or 0 button

to select the file to play back.

Press the PLAY button to

start playback.

The Record/play indicator light turns

green, and the elapsed playing time is

indicated on the display.

Press the + or – button to select

the proper sound volume.

The display shows the volume level. You

can choose between 0 to 30.

Press the FOLDER button to

select the desired folder

Press the REC button to start

recording.

The Record/play indicator light turns red,

and recording starts.

To stop recording, press the

STOP button.

New recordings are saved as the last file

in the folder.

4Identification of Parts

aCurrent folder

bCurrent recording

mode

cCurrent file number

dRecording time

eRemaining recording

time

A audio input

terminal of

other devices

bCurrent file number

cPlaying time

DIGITAL VOICE RECORDER

VN-3100/VN-3100PC

VN-2100/VN-2100PC

VN-1100/VN-1100PC

INSTRUCTIONS

Thank you for purchasing an Olympus

Digital Voice Recorder.

Please read these instructions for information

about using the product correctly and safely.

Keep the instructions handy for future reference.

To ensure successful recordings, we recommend that

you test the record function and volume before use.

Record/play indicator light

Display (LCD panel)

DISPLAY/MENU button

ERASE button

Hold switch

Built-in speaker

Battery cover

Built-in Microphone

REC (Record) button

STOP button

PLAY button 9 (Fast Forward) button

0 (Rewind) button

+ button

– button

4Canceling Playback

To Stop

Press the STOP button.

➥The recorder stops in the middle of the file being played.

To Resume Playback

Press the PLAY button again.

➥Playback will resume at the point of interruption.

The end of the file is located by pressing and holding the 9 button during fast forwarding. The recorder will

pause at the end of the file. If you do not release the 9 button, the recorder will continue fast forward.

The beginning of the file is located by pressing and holding the 0 button during rewinding. The recorder will

pause at the beginning of the file. If you do not release the 0 button, the recorder will continue rewinding.

sWhen the index mark is shown in the middle of a file, it will stop temporarily in the position of the index mark.

4Changing Playing Speed

You can change the playing speed by pressing the PLAY button while

the recorder is playing back.

sWhen the slow playback mode is selected, the “SLOW” appears and, for the fast playback mode,

“FAST” appears on the display while the recorder is playing back.

sThe recorder stops playing when you press the STOP button while playing back in the slow/fast mode,

or when it reaches to the end of the file. If you once press the STOP button and start playback again,

the recorder will play back files in normal speed as well.

4Locating the Beginning of the File

While the recorder is playing back or playing back in slow/fast mode, pressing the 9 or 0

button forwards or rewinds to the beginning of the next file or the file being played respectively. If an

index mark is encountered midway, playback begins at that point. (See “Index Marks” for details)

4Listening with Earphones

You can listen to files by connecting earphones to the earphone jack.

If an earphone is connected, the speaker doesn't emit sound. Sound will

be played back monaurally.

sTo avoid irritation to the ear, insert the earphone after turn down the volume level.

sWhen you listen with the earphone during playback, do not raise the volume too

much. It may cause hearing impairment and decrease in hearing ability.

*Earphones are not supplied. You can use any standard 3.5mm monaural earphone or headphone.

4Forwarding and Rewinding

Fast Forward

Press and hold the 9 button while playing a file.

➥When you release the 9 button, the recorder will resume

normal playback.

Rewind

Press and hold the 0 button while playing a file.

➥When you release the 0 button, the recorder will resume

normal playback.

Normal speed Slow playback

(-25%)

Fast playback

(+50%)

*PC (USB) terminal....

VN-1100PC/VN-2100PC/VN-3100PC

State of the

recorder

While in stop

mode

While in

record mode

While in stop

mode or

playback mode

Operation

Press and hold

the STOP button

Press the

DISPLAY button

Press the

DISPLAY button

Display

The total number of files recorded in the folder and

remaining recording time appears on the display.

The display switches between current recording time and

remaining recording time.

Playing time → Remaining playing time → Recording date

of the file → Recording time of the file → Playing time . . .

USB terminal*

For customers in North and South America

USA RFI

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment gen-

erates, uses and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instructions, may cause harmful interference to radio communications. How-

ever, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

Canadian RFI

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digital apparatus as set out in the Radio Interference Regulations of the Canadian Depart-

ment of Communications.

Cet appareil numérique ne dépasse pas les limites de Catégorie B pour les émissions de

bruit radio émanant d’appareils numériques, tel que prévu dans les Règlements sur

l’Interférence Radio du Département Canadien des Communications.

For customers in Europe

“CE” mark indicates that this product complies with the European

requirements for safety, health, environment and customer protection.

This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection

of waste electrical and electronic equipment in the EU countries. Please do not throw

the equipment into the domestic refuse. Please use the return and collection systems

available in your country for the disposal of this product.

Applicable Product : VN-3100/VN-3100PC/VN-2100/VN-2100PC/VN-1100/VN-1100PC

HOLD

*Strap is not supplied.

Use the optional accessory.

aCurrent folder

FOLDER/INDEX button

BZ8174-02-INST-E1 2006.06.30

Erase

Press the FOLDER button

to select folder.

Press the 9 or 0

button to select the file to

be erased.

Press the ERASE button.

Press the 9 or 0

button to select the “YES”.

Press the PLAY button.

4Erasing

You can easily erase unnecessary files. Sequential file numbers are reassigned automatically.

Erasing One File at a Time

Erase All Files from a Folder

Other Functions

sThe recording time shown above is for one continuous file. The available recording time may be shorter

than specified if several files are recorded. (Use the remaining time and recorded time only as references.)

4Recording Modes (XHQ HQ SP LP)

The recording mode can be chosen from XHQ (extra high quality

sound recording) and HQ (high quality sound recording), SP

(standard recording), and LP (long-term recording).

In Menu mode selection... XHQ, HQ, SP, LP

Notes

sAn erased file cannot be restored.

sIf operation is not executed for 8 seconds during the setting, it will return to the stop

status.

sCompletion of erasing may take several seconds.

Do not attempt to remove, replace battery or attempt any other functions on the voice

recorder during this period because

data may be corrupted.

Press and hold the MENU

button for 1 second or longer

while the recorder is stopped.

Press the + or – button to

select what you would like to

set up.

The selected menu item flashes.

Use the 9 or 0 button

to change the setting.

Press the PLAY button to

confirm the setting.

Press the STOP button to

close the menu.

4Basic Operation of the Menu Mode

Using the menu function, you can change various settings according to your preference.

Using The Variable Control Voice Actuator (VCVA)

When the microphone senses that sounds has reached a preset volume,

the built-in Variable Control Voice Actuator (VCVA) starts recording

automatically, and stops it when the volume drops.

Particularly helpful for extended recording, the VCVA not only conserves

memory by turning off recording during silent periods, but also makes

playback more efficient and convenient.

In Menu mode selection... On, OFF

sDuring recording, use the + and – buttons to adjust the VCVA level in 15 levels.

sThe Record/play indicator light is lit during recording. When the recorder is in

Standby mode, the Record/play indicator light flashes and “VCVA” flashes on

the display.

4Index Marks

Index marks can be placed in a file during recording or playback to

provide and quick and easy way of keeping track of important sections

in the file.

1Press the INDEX button during recording (pause recording)

or playback to set an index mark.

An index number appears on the display.

Clearing an Index Mark

Press the ERASE button while the index number appears on the display.

sUp to 10 index marks can be set in a file.

sSequential index marks numbers are reassigned automatically.

4Microphone Sensitivity (HI LOW)

Microphone sensitivity is adjustable to meet your recording needs.

In Menu mode selection... HI, LOW

HI: High-sensitivity mode that records sounds in all directions.

LOW: Low-sensitivity mode suited for dictation.

sTo ensure successful recording, make a test recording to choose appropriate

microphone sensitivity before recording.

sIf you choose “HI”, we recommend setting the recording mode to XHQ or HQ to

best take advantage of the higher sensitivity.

If you choose “HI”, background noise may be high depending on the recording conditions.

4Timer Recording (TIMER)

(Excluded VN-1100/VN-1100PC)

You can schedule for automatic recording, specifying the start time

and end time of recording. When the timer-controlled recording

completes, the setting is released.

In Menu mode selection... SET, On, OFF→After selecting SET, press

the PLAY button to set the time.

4System Sounds (BEEP)

The recorder beeps to alert you to button operations or warn you of

errors. System sounds may be turned off.

In Menu mode selection... On, OFF

If the alarm playback function has been set, the alarm will sound at the scheduled

time even if the system sounds are disabled (Excluded VN-1100/VN-1100PC).

Batteries

Warning

•Batteries should never be exposed to flame, heated, short-circuited or disassembled.

•Do not attempt to recharge alkaline, lithium or any other non-rechargeable batteries.

•Never use any battery with a torn or cracked outer cover.

•Keep batteries out of the reach of children.

•If you notice anything unusual when using this product such as abnormal noise, heat,

smoke, or a burning odor:

1remove the batteries immediately while being careful not to burn yourself, and;

2call your dealer or local Olympus representative for servicing.

Troubleshooting

Q1 Nothing happens when a button is pressed.

A1 • The HOLD switch may be set to HOLD.

•The batteries may be depleted.

•The batteries may be inserted incorrectly.

Q2 No sound or quiet sound is heard from the speaker while playing back.

A2 • The earphone plug may be plugged into the recorder.

•The volume may be set to the minimum level.

Q3 Recording is not possible.

A3 By pressing the STOP button repeatedly while the recorder stops, check if the

display shows:

•

The remaining recording time in the selected folder may have reached“00:00”.

•The number of files is 100.

Check if the display shows “FULL” by pressing the REC button.

Q4 The playback speed is too fast (slow).

A4 The recorder may be set to Fast (slow) Playback.

Specifications

Recording medium: Built-in flash memory

Overall frequency response: XHQ mode 300 to 7,200 Hz

HQ mode 300 to 7,200 Hz

SQ mode 300 to 5,400 Hz

LP mode 300 to 3,100 Hz

Recording time: VN-3100/VN-3100PC: 128 MB

XHQ mode: Approx. 5 hours 40 minutes

HQ mode: Approx. 11 hours 40 minutes

SP mode: Approx. 23 hours 30 minutes

LP mode: Approx. 71 hours 40 minutes

VN-2100/VN-2100PC: 64 MB

XHQ mode: Approx. 2 hours 50 minutes

HQ mode: Approx. 5 hours 50 minutes

SP mode: Approx. 11 hours 40 minutes

LP mode: Approx. 35 hours 50 minutes

VN-1100/VN-1100PC: 32 MB

XHQ mode: Approx. 1 hour 25 minutes

HQ mode: Approx. 2 hours 50 minutes

SP mode: Approx. 5 hours 50 minutes

LP mode: Approx. 17 hours 50 minutes

Microphone: Electret Condenser Microphone (monaural)

Speaker: Built-in ø 28 mm round dynamic speaker

Maximum power: 120 mW

Earphone jack (monaural): ø 3.5 mm diameter, impedance 8 Ω

Microphone jack(monaural): ø 3.5 mm diameter, impedance 2 kΩ

Power supply: Two AAA (LR03 or R03) batteries or

Two Ni-MH rechargeable batteries

Continuous battery use time:

Alkaline batteries. 25 hours

Ni-MH rechargeable batteries: Approx. 15 hours

Dimensions: 102(L) × 39 (W) × 19.5 (T) mm

Weight: 63 g (including battery)

Battery life is measured by Olympus. It varies greatly according to the type of batteries

used and the conditions of use.

Your recorded contents are for your personal use or pleasure only. It is prohibited to record

copyrighted material without permission of the copyright holders according to copyright law.

*Specifications and design are subject to change without notice for improvement of performance.

Accessories (Optional)

Ni-MH Rechargeable Battery Charger: BU-400 (Europe only)

Ni-MH Rechargeable Battery: BR401

Connecting cord (Earphone jack ↔ Microphone jack): KA333

Noise-Cancellation microphone: ME52

Electret condenser microphone: ME15

Dual monaural earphone: E20

Telephone pickup: TP7

Neck Strap: ST26

General Precautions

Read this manual carefully to ensure that you know how to operate it safely and correctly.

Keep this manual in an easily accessible location for future reference.

•The warning symbols indicate important safety related information. To protect yourself and oth-

ers from personal injury or damage to property, it is essential that you always read the warnings

and information provided.

Warning regarding data loss

Recorded content in memory may be destroyed or erased by operating mistakes, unit malfunction,

or during repair work. For important recorded content, we recommend you to write it down some-

where (for VN-1100/VN-2100/VN-3100) or make a back-up by downloading to a PC (for VN-1100PC/

VN-2100PC/VN-3100PC).

Any liability for passive damages or damage of any kind occurred due to data loss incurred by a

defect of the product, repair performed by the third party other than Olympus or an Olympus autho-

rized service station, or any other reasons is excluded from the Olympus’s liability.

Press the FOLDER button

to select folder.

Press the ERASE button

twice.

Press the 9 or 0

button to select the “YES”.

Press the PLAY button.

Menu setting screen Move the selection one position

up/increase the number.

Move the selection one position

down/decrease the number.

Move the selection

one position

to the left.

Move the selection

one position

to the right.

Confirm the setting

Notes

sThe recorder will stop if you leave it idle for 3 minutes during a menu setup operation,

when a selected item is not applied.

sIf you press the STOP button during a menu setup operation, the recorder will stop and

apply the items that were set to that point.

4Alarm Playback Function ( )

(Excluded VN-1100/VN-1100PC)

You can use the alarm playback function to sound the alarm tone for 5

minutes at the scheduled time. Within this 5 minutes, pressing any button

other than the HOLD switch starts the recorder to play back the pre-

selected file.

In Menu mode selection... SET, On, OFF→After selecting SET, press

the PLAY button to set the time.

With the alarm playback function, only one file can be played back.

Select a file for the function before setting the time.

To cancel an alarm playback

For in the menu mode, select OFF and press the PLAY button.

sRegardless of the selected folder, once the alarm playback is set, it operates every day unless the

setting is canceled.

sTo view the current setting, select On, and then press the PLAY button.

sThe alarm tone stops automatically if no button is pressed within 5 minutes after the alarm starts. The

file is not played back in this case.

sIf the recorder has no recorded file in the selected folder, the alarm playback function is not available.

sAlarm playback occurs every day unless it is set to OFF.

To cancel the timer setting

For the timer in the menu mode, select OFF, and then press the PLAY button.

sTo view the current setting, select On, and then press the PLAY button.

sWith this function, you can set only the start and the end time of recording. The current settings of the

recording mode, microphone sensitivity, VCVA and folder are applied for the settings before you set

timer-controlled recording.

sThe setting exceeding the remaining recording time is not allowed.

sYou can record at any time even it is not within the specified recording duration. However, if that makes

the remaining recording time insufficient for the timer-controlled recording, the recording will not complete.

sIf any operation is ongoing, the timer-controlled recording is overridden.

4Moving File Between Folders

(Excluded VN-1100/VN-1100PC)

You can move files recorded in folders A, B, C and D to other folders.

The moved file is added at to the end of the destination folder.

1Choose the file you want to transfer and press the PLAY button

to play it.

2Press and hold the MENU button for 1 second or longer

while the file is playing.

3Press the 9 or 0 button to choose a destination folder.

4Press the PLAY button.

The destination folder and the number of the moved file appear

on the display, and moving is completed.

If the destination folder is full (100 files), “FULL” appears on the display, and you

cannot move the file to that folder.

4Resetting the Recorder (CLEAR)

This function resets the current time and other settings to their initial

status. It is useful if you are having problems with the recorder, or if you

want to erase the entire memory of the recorder.

1Hold the STOP button, and hold the ERASE button for 3

seconds or longer.

2Press the 9 or 0 button to select the “YES”.

3Press the PLAY button.

If you leave the recorder untouched for 8 seconds or longer before you press the PLAY button in Step 3,

Clear mode will be canceled, and the recorder will enter Stop mode.

For safe And Correct Usage

•Do not leave the recorder in hot, humid locations such as inside a closed automobile

under direct sunlight or on the beach in the summer.

•Do not store the recorder in places exposed to excessive moisture or dust.

•Do not use organic solvents such as alcohol and lacquer thinner to clean the unit.

•Do not place the recorder on top of or near electric appliances such as TVs or refrigerators.

•Avoid sand or dirt. These can cause irreparable damage.

•Avoid strong vibrations or shocks.

•Do not disassemble, repair or modify the unit yourself.

•Do not operate the unit while operating a vehicle (such as a bicycle, motorcycle, or go-cart).

•Keep the unit out of the reach of children.

File to be erased

Folder to be erased

Microphone

sensitivity display

VCVA indicator

Alarm indicator

aDestination folder

bDestination

number of the file

XHQ HQ SP LP

Model Mode

Approx.1 hour 25 minutes Approx.2 hours 50 minutes

Approx.5 hours 50 minutes

Approx.17 hours 50 minutes

Approx.35 hours 50 minutes

Approx.11 hours 40 minutes

Approx.5 hours 50 minutes

VN-1100/

VN-1100PC

VN-2100/

VN-2100PC

Approx.2 hours 50 minutes

Current recording

mode

Approx.71 hours 40 minutes

Approx.23 hours 30 minutes

Approx.11 hours 40 minutes

VN-3100/

VN-3100PC

Approx.5 hours 40 minutes

Product specificaties

Merk:	Olympus
Categorie:	Voice recorder
Model:	VN-3100PC
Gewicht:	63 g
Breedte:	39 mm
Diepte:	19.5 mm
Hoogte:	102 mm
Continue audio-afspeeltijd:	12 uur
Ondersteund audioformaat:	MP3
Type aansluitplug:	3,5 mm
Ondersteund aantal accu's/batterijen:	2
FM-radio:	Nee
Stemopname:	Ja
Geluidsopnameformaten:	XHQ/HQ/SP/LP
Totale opslagcapaciteit:	0.128 GB
Compatibele besturingssystemen:	Windows 2000, XP
USB:	Ja
Minimale opslag schijfruimte:	25 MB
Minimale processor:	Pentium
Minimale RAM:	32 MB
CD-ROM drive:	Ja
Type opslagmedium:	Flashgeheugen
Minimum processor snelheid:	166 MHz
Spraak opnametijd:	5.6 uur
Batterijtechnologie:	Alkaline
Type batterij:	AAA