Oki Microline 321 Handleiding

Oki Printer Microline 321

Lees hieronder de 📖 handleiding in het Nederlandse voor Oki Microline 321 (37 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/37
Chapter 1
Printer Unpacking & Setup
Choose a sturdy table, desk or printer stand to place your printer on when you remove it from
the carton. Remove the styrofoam sides be sure to save all packing materials in case you need
to ship the printer again and check the box for these contents:
1) ML320/321 printer
2) Paper separator
3) Power cord
4) Platen knob
5) Ribbon cartridge
Note: Interface cable and paper are sold separately.
If any of these items is missing or damaged, see your dealer for a replacement.
ML 320/321 ( 96-02-01 )
Setup Preliminaries
Preliminaries
Don't plug the printer in until its set up and ready to operate.
If there is clear protective film on the access cover, remove the film. Open the access cover
and remove the shipping retainer (1). Be sure to save it with the other packing materials in
case you ship the printer.
ML 320/321 ( 96-02-01 )
Install The Paper Separator and Platen Knob
Install The Paper Separator and Platen Knob
Open the rear cover of the printer (2). Holding the legs closed against the paper separator,
place the tab on one side of the separator over the stud on the side of the rear cover (3).
Pull gently on the other tab to slide it over the stud on the other side of the rear cover. Then
close the rear cover. Insert the platen knob on the right side of the printer (4). Match the
flatside of the knob to the flat side of the platen shaft.
ML 320/321 ( 96-02-01 )


Product specificaties

Merk: Oki
Categorie: Printer
Model: Microline 321

Heb je hulp nodig?

Als je hulp nodig hebt met Oki Microline 321 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Printer Oki

Handleiding Printer

Nieuwste handleidingen voor Printer