O2 Cool FD10002A Handleiding

O2 Cool Ventilator FD10002A

Lees hieronder de đź“– handleiding in het Nederlandse voor O2 Cool FD10002A (5 pagina's) in de categorie Ventilator. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
O2COOL, LLC
Chicago, IL USA
312.951.6700
www.o2-cool.com
10” FIN FAN WITH ADAPTER
Model: FD10002A
IMPORTANT SAFETY INSTRUCTIONS
- Read these instrucons
- Keep these instrucons.
- Heed all warnings.
- Follow all instrucons.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any venlaon openings. Install in accordance with the manufacturer’s
instrucons.
- Do not install near any heat sources such as radiators, heat registers, stoves, ampliî…Źers or
other apparatus that produce heat.
- Protect the power cord from being walked on or pinched parcularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
- Only use aachments/accessories specied by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of me.
- Refer all servicing to qualiî…Źed service personnel. Servicing is required when the apparatus
has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally or has been dropped.
WARNING
CHOKING HAZARD - SMALL PARTS. This is not a toy. Not for children under 3 years old. Do not
use where small children can reach it. Do not operate the fan in the presence of explosive or
ammable fumes. There is a risk of explosion or leakage if baeries are incorrectly installed. Do
not mix old and new baeries. Do not mix alkaline, carbon-zinc or rechargeable baeries. Do
not dispose of baeries in re because baeries may explode or leak.
O2COOL, LLC
Chicago, IL USA
312.951.6700
www.o2-cool.com
OPERATING INSTRUCTIONS
For best performance use fresh alkaline baeries. To install baeries, posion fan face down,
slide out baery door on back, install baeries following (+/-) marks and replace door. You
may have to push down as you slide in. As a safety precauon, the fan includes 2 screws to lock
the baery compartment. Tighten screws using #1 Phillips screwdriver. Screws do not have to
be removed from the baery cover. To operate, slide switch located on side of fan. To operate
fan using AC power (120-240 VAC, 50-60 Hz), use supplied adapter only. Inserng adapter plug
into fan disconnects the installed baeries from the circuit. Remove baeries if fan will be
stored for two weeks.
TROUBLESHOOTING
If fan does not operate, verify baeries or supplied adapter are installed properly and nothing is
obstrucng the fan blades.
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two
condions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operaon.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protecon against harmful interference in a residenal installaon. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instrucons, may cause harmful interference to radio communicaons. However, there is
no guarantee that interference will not occur in which can be determined by turning the
equipment oî…’ and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separaon between the equipment and receiver.
* Connect the equipment into an outlet on a circuit diî…’erent from that to which the receiver is
connected.
* Consult the dealer or an experienced radio/TV technician for help.
Cauon: Changes or modicaons to this unit not expressly approved by the party responsible
for c ompliance could void the user’s authority to operate the equipment.
O2COOL, LLC
Chicago, IL USA
312.951.6700
www.o2-cool.com
10” FIN FAN WITH ADAPTER
Model: FD10002A
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- Lea estas instrucciones.
- Guarde estas instrucciones.
- Preste atenciĂłn a todas las advertencias.
- Siga todas las instrucciones.
- No ulice este equipo cerca de agua.
- Limpie sólo con un paño seco.
- No bloquee ninguna abertura de venlación. Instale de acuerdo con las instrucciones del
fabricante.
- No instale cerca de ninguna fuente de calor tal como radiadores, salidas de calefacciĂłn,
estufas, ampliî…’cadores u otros equipos que produzcan calor.
- Proteja el cable eléctrico y no lo coloque en un lugar donde haya circulación o donde pueda
ser aplastado, especialmente en los enchufes, los receptáculos y el punto en que sale del
equipo.
- Use sĂłlo î…’jaciones/accesorios especiî…’cados por el fabricante.
- Desenchufe este equipo durante tormentas eléctricas o cuando no lo use por períodos
prolongados.
- Solicite todos los trabajos de reparación a personal de servicio calicado. Deberá solicitar
trabajos de reparaciĂłn cuando el equipo se haya averiado de algĂşn modo, por ejemplo, si el
cable de alimentación o el enchufe resulta dañado, si se derrama líquido o caen objetos sobre
Ă©l, si el equipo ha estado expuesto a lluvia o humedad, si no funciona con normalidad o si ha
caĂ­do al suelo.


Product specificaties

Merk: O2 Cool
Categorie: Ventilator
Model: FD10002A

Heb je hulp nodig?

Als je hulp nodig hebt met O2 Cool FD10002A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Ventilator O2 Cool

Handleiding Ventilator

Nieuwste handleidingen voor Ventilator