NUVO Dupont 60/1822 Handleiding

Bekijk gratis de handleiding van NUVO Dupont 60/1822 (2 pagina’s), behorend tot de categorie Lamp. Deze gids werd als nuttig beoordeeld door 26 mensen en kreeg gemiddeld 4.1 sterren uit 5 reviews. Heb je een vraag over NUVO Dupont 60/1822 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ASSEMBLY INSTRUCTION

SKU#60/18, 60/1822, 60/1841, 60/18 2142

NOTE: Please consult a qualied electrician if you are not certain of installation or servicing.

CAUTION:Before starting installation or servicing, disconnect power by turning o the circuit breaker or by

removing the fuse at the fuse box.

1.Carefully unpack the xture, lay out all parts on a clean surface.

2.Adjust Chandelier Arms to their proper position.

3.Insert the Plug into Slot. To prevent electric shock, match wide side of Plug to wide Slot. Twist the Central

Column to the Bushing until it is xed rmly. Fasten the Finial onto the other Bushing.

4.Fasten the Mounting Strap to Outlet Box using the Outlet Box Screws provided.

5.Using two pliers, twist open links at the two ends of the Chain. Hook one link to the Loop and the other link

to the Screw Collar Loop. Close the links. Place a piece of cloth between the pliers jaws and the chain links

to prevent scratching the link nish.

6.Weave the xture wires up through the Loop, through the Chain, through the Ring, through the Canopy,

through the Screw Collar Loop and through the Nipple on the Mounting Strap.

7.Connect the wire with writing on it from the xture to the black wire (live wire) from the supply circuit.

Connect the wire without writing on (with raised ribs) from the xture to the white wire (neutral wire) it

from the supply circuit. Cover the connections using provided wire connectors. Tie ground wires from xture

and from Outlet Box to the Ground Screw on the Mounting Strap. Position wires back inside Outlet Box.

8.Place the Canopy over the Nipple all the way to the Ceiling and tighten the Ring onto the Screw Collar Loop

until the Canopy is held rmly against the ceiling.

9.Unscrew Socket Rings from Sockets. Place Shades over Sockets, reattach Socket Rings to Sockets to secure

Shades. Insert Bulbs. (Not included).

10.Turn on power.

A Satco Product

Product specificaties