NUVO 64/140 Handleiding

Bekijk gratis de handleiding van NUVO 64/140 (4 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 3 mensen. Heb je een vraag over NUVO 64/140 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

/ 4 PDF

1

LED RGBTW INDOOR/OUTDOOR

TAPE LIGHTS

INSTALLATION AND SAFETY INSTRUCTIONS

IMPORTANT: Read before installing xture. Retain for future reference.

WARNING: Risk of Fire or Electric Shock

• This tape lighting is only intended to be used with the products provided in the kit.

• Installation requires knowledge of luminaries electrical systems. If not qualied, do not attempt installation. Contact

a qualied electrician.

• To reduce risk of re and over-heating, secure all connections.

• TURN OFF the electrical power before proceeding.

• The electrical rating of this product is 120V/60Hz.

• The grounding and banding of the system shall be done in accordance with National Electric Code (NEC) Article 600

and local codes.

• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.

• Do not damage any PCB conductive parts, squeeze or fold the LED tape light when installing.

• Pay attention to positive and negative polarities before installation, otherwise the LED tape light may be damaged.

• Prevent static electricity when installing. Avoid damp or wet exposure.

• This device is not intended for use with emergency exits.

CUTTING

Applies to indoor models only 64-100, 64-110, 64-111, 64-120,

64-121, 64-130, 64-131, 64-132, 64-133, 64-134, 64-135.

• Always disconnect the power supply before cutting. LED strips can

be cut as indicated in diagram.

Satco Products, Inc.

Brentwood, NY 11717© Copyright 2023 Satco Products, Inc. 1/23 v1.3

Models: 64-100, 64-110, 64-111, 64-120, 64-121, 64-130, 64-131, 64-132,

64-133, 64-134, 64-135, 64-140, 64-141, 64-142, 64-143, 64-144, 64-145

Indoor Installation

Applies to models 64-100, 64-110, 64-111, 64-120, 64-121, 64-130, 64-131, 64-132, 64-133, 64-134, 64-135.

STEP 1: Clean surfaces carefully

(free from grease and dust)

before installing to ensure that the

double sided tape or adhesive

sticks properly to the surface.

Wood, powder-coated, structured

surfaces, glass, stainless steel etc.

are not recommended locations.

STEP 2: Gently peel off the tape,

the adhesive tape may tear by

over stretching.

STEP 3: Wearing an anti-static

ring, gently press PCB areas.

Do not press down on the

actual LEDs.

STEP 4: Be careful to not step

on the reel if you unreel the

entire strip before installation.

Product specificaties