Numark Mixdeck Express Handleiding

Numark DJ Party Music Mixdeck Express

Lees hieronder de 📖 handleiding in het Nederlandse voor Numark Mixdeck Express (52 pagina's) in de categorie DJ Party Music. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/52

 QUICKSTART GUIDE

ENGLISH ( 2 – 11 )

 GUÍA DE INICIO RÁPIDO

ESPAÑOL ( 12 – 21 )

 GUIDE D’UTILISATION RAPIDE

FRANÇAIS ( 22 – 31 )

 GUIDA RAPIDA

ITALIANO ( 32 – 41 )

 KURZANLEITUNG

DEUTSCH ( 42 – 51 )

BOX CONTENTS

 MIXDECK EXPRESS

 Power cable

 USB cable

 Software CD

 Quickstart Guide

 Safety & Warranty Information Booklet

SETUP

1. Make sure all items listed in the BOX CONTENTS section are included in the box.

2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.

3. Study the connection diagram in this guide.

4. Place mixer in an appropriate position for operation.

5. Make sure all devices are turned off and all faders and gain knobs are set to "zero."

6. Connect all stereo input sources as indicated in the diagram.

7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.

8. Plug all devices into AC power.

9. Switch everything on in the following order:

• Audio input sources (i.e. turntables, CD players, etc.)

• Mixer

• Last, any amplifiers or output devices

10. When turning off, always reverse this operation by turning off:

• Amplifiers

• Mixer

• Last, any input devices

CONNECTION DIAGRAM

MICROPHONE

HOUSE AMP TURNTABLE POWER

HEADPHONES

COMPUTER

REAR & FRONT PANEL FEATURES

44 55

10 3

15 11

1413

1. POWER BUTTON – Press this to turn the unit on and off.

2. POWER IN – Use the included power adapter to connect the mixer to a power outlet. While the power is switched off,

plug the power supply into the mixer first, then plug the power supply into a power outlet.

3. USB SLAVE – Connect the MIXDECK EXPRESS to a computer via this USB jack and your MIXDECK EXPRESS can

be used as a software controller device using USB MIDI protocol. You can also use MIXDECK EXPRESS as your

computer's soundcard. (Remember to select MIXDECK EXPRESS as the playback device in your computer's sound

settings. You can use MIXDECK EXPRESS as a soundcard with or without using it as a software controller.)

Note: The mixer controls do not have any MIDI function.

4. MASTER OUTPUT (BALANCED) – Connect this low-impedance XLR output to a PA system or powered monitors. The

level of this output is controlled with the MASTER VOLUME on the top panel.

5. MASTER OUTPUT (RCA) – Use standard RCA cables to connect this output to a speaker or amplifier system. The

level of this output is controlled by the MASTER VOLUME on the top panel.

6. AUX INPUTS (RCA) – Connect audio sources to these inputs. These inputs can accept both line and phono-level

signals.

7. LINE | PHONO SWITCH – Flip this switch to the appropriate position, depending on the device connected to the AUX

INPUTS. If you are using phono-level turntables, set this switch to "PHONO" to provide the additional amplification

needed for phono-level signals. If using a line-level device, such as a CD player or sampler, set this switch to "LINE."

8. GROUNDING TERMINAL – If using phono-level turntables with a grounding wire, connect the grounding wire to these

terminals. If you experience a low "hum" or "buzz", this could mean that your turntables are not grounded.

Note: Some turntables have a grounding wire built into the RCA connection and, therefore, nothing needs to be

connected to the grounding terminal.

9. MIC 2 INPUT – Connect a 1/4" microphone to this input.

10. STEREO / MONO – Adjusts the Program mix for stereo or mono operation.

11. HEADPHONES – Connect your 1/4" or 1/8" headphones to this output for cueing and mix monitoring. Headphone

output controls are located on the top panel.

12. MIC INPUT – Connect a 1/4" microphone to this input.

13. MIC GAIN – Adjusts the audio level of the microphone signal.

14. MIC BASS – Adjusts the low (bass) frequencies of the microphone channel.

15. MIC TREBLE – Adjusts the high (treble) frequencies of the microphone channel.

Tip: If you experience feedback when using a microphone at loud levels, try turning down the high frequencies.

Product specificaties

Merk:	Numark
Categorie:	DJ Party Music
Model:	Mixdeck Express
Kleur van het product:	Zwart, zilver
Meegeleverde kabels:	USB
Aantal USB 2.0-poorten:	2
Microfoon, line-in ingang:	Ja
Meegeleverde software:	Serato DJ Intro
Equalizer-instellingen:	Ja
Stroomvoorziening via USB:	Nee
AUX ingang:	Ja
Aantal kanalen:	3 kanalen
XLR out:	1
Line inputs (RCA):	1
Digitaal geluid verwerken:	- Bit