Hercules VirtualDJ 7 LE 4-Mx Handleiding

Hercules DJ Party Music VirtualDJ 7 LE 4-Mx

Lees hieronder de 📖 handleiding in het Nederlandse voor Hercules VirtualDJ 7 LE 4-Mx (6 pagina's) in de categorie DJ Party Music. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
VirtualDJ 7 LE 4-Mx Overview
The VirtualDJ 7 LE 4-Mx interface can be split in : to 9 areas
Waveform
4 Deck Viewer areas: A, B, C and D
2 Deck Controls areas: left and right
Mixer
Browser area
A. Waveform area
This area displays up to : 4 waveforms
1. the waveform of deck A in blue
2. waveform of deck B in red the
3. the waveform of deck C in green
4. the waveform of deck D in beige
5. a zoom slider on the left
6. on 3 zoom presets the right
B. Deck Viewer: A, B, C and D areas
On each virtual deck, you can view:
1. rtist name the a
2. the track name
3. the time remaining until the end of the track
4. the time elapsed since the start of the track
5. the gain applied to the track (set DJ Console 4-Mx gain button) via
6. the musical key of the track
7. the pitch change compared to the track default pitch ’s
8. a compressed view of the waveform
9. the BPM rate of the track
10. the virtual deck name (A, B, C and D)
C. Deck Controls: left and right areas
In the areas (just on top of the browser) you can: Deck Controls ,
load or eject music files on the corresponding deck
move within the track
play the track loaded on the deck
add a bookmark a position (called Cue point) to a
add effects to the track
change the pitch (the playback speed)
view the BPM rate and variation
1. the controlled deck unit (A or C on left, B or D on right) Deck letter:
2. names of the effects loaded buttons 1 to 12 Effects names: on
3. modulates the last effect loaded on the deck Effect modulator:
4. activates the effects loaded on buttons 1 to 12 ( Effect on/off: Shift
button switches between buttons 1- and 7-12) 6
5. and activation Auto Cue Auto Loop
6. Rewind/fast forward
7. and controls Pitch scale pitch reset
8. on manual BPM counter (click Tap: the beat to calculate the BPM)
9. temporarily change the playback speed Pitch bend - / +:
10. d ( set the playback speePitch fader: up=slower / down=faster)
11. e.g. synchronize the deck with the other deck (Sync: if activated on
left deck controls, synchronizes left deck with right deck)
12. remove the track from the deck Eject:
13. buttons Stop, Cue, Play/Pause
Stop = stop playback and go to Cue point 1
Cue = set Cue point (position bookmark) 1
Play/Pause = play the track or pause playback
14. drag and drop tracks on it to load; move within the track Jog wheel =
D. Mixer
The area, in the center, lets you adjust: virtual mixer
the volume of each controlled deck
the equalization (EQ = high/mid/low on each deck )
the cross fader
the gain on each deck
which deck you control and which deck you preview
scratch mode: On = scratch / Off = pitch bend
1. sets gain on controlled decks (A/C on left, B/D on right) Gain:
2. mutes the corresponding frequency band (high/mid/low) Kill:
3. attenuate or add gain to the frequency band Equalization:
4. Level VU meter for decks: blue = A / green = C / red = B / orange = D
5. yellow = assigned / white = not assigned (default: Deck assignment:
A & C on left of the cross fader, B & D on right)
6. blue = on / white = off Scratch mode:
7. output level for the audience Master output volume:
8. automatically moves the cross fader the other deck Auto mode: to
9. = deck preview (blue = preview / white = no preview) PFL
10. see which virtual deck is controlled in the mixer Controlled deck:
11. up = louder / down = lower Left and right decks volume faders:
12. adjusts the mix between left and right decks Cross fader =
E. Browser
This area lets you on your computer to browse through the music
select files you will load decks and mix with. The browser has on the 2
sub-sections:
the folder browser on the left: the area where you select a folder, a
drive or a remote access location.
the file browser on the right: the area where you can select the music
track you want to load on each deck.
DJ Console 4-Mx in VDJ 7 LE
DJ Console 4-Mx has in VirtualDJ 7 LE 4- : 8 main types of controls Mx
Browsing
Effects, loops and sampler
Playback controls: 2-deck and 4-deck
Jog wheels
Preview controls
Mixer controls: 2-deck and 4-deck
Speed controls
4-deck controls
A. Browsing
DJ Console 4-Mx provides to browse in VirtualDJ 7 LE 4-Mx: 5 controls
1. Folder: move to the folder browser, or expand the folder.
2. Files: go to the file browser.
3. Up/down buttons: move up/down in the files or folder list.
4. Load on left/right deck: load the file on left/right controlled deck.
5. Press and hold up/down buttons while turning the jog wheel:
move at high speed through the active browser area (folder or files).
B. Effects / Loops / Sampler
Effects, loops and sampler are controlled by : 8 controls per deck
6 transport buttons (1 to 6): activate or switch off the function.
1 Shift transport button: convert these buttons into 7 to 12.
modulates the last effect loaded. 1 knob
Changing the deck changes the bank of effects (effects on deck A are
different from effects on deck C).
C. Playback controls
Once a track is loaded on a deck, you can use the : playback controls
Play/Pause: starts/pauses playback of the track loaded on the deck.
Cue: in pause mode, sets a Cue point (bookmark); during playback,
goes to the cue point and plays.
Stop: stops playback and goes back to the first cue point (if any).
Rewind/fast forward: moves back/forward in the track (while the
button remains pressed down).
4-deck controls
After changing the target deck (with buttons), process Deck C/Deck D
the same playback operations as in 2-deck mode.
D. Jog wheels
The jog wheels control up to : 5 operations
1. Browse within a track: if a track is loaded on a deck (but is not
playing), turning the jog wheel moves inside the track.
2. Scratch On/Off: when scratch mode is on, turning the jog wheel while
pressing it down slightly creates a scratch sound (like on a vinyl
turntable). Your fingertips feel the scratch, and a blue light on the jog
wheel shows the push -down status. ed
3. Play/Pause: when scratch mode is on pressing the jog wheel down ,
slightly pauses playback. This mode lets you start/pause playback by
lifting up/pressing down your hand on the jog wheel.
4. Pitch Bend: when scratch mode is o (i.e. in playback mode), turning
the jog wheel speeds up/slows down the music: the jog wheel bends
the pitch.
5. Fast browsing through files or folders: press and hold the up or
down button, and turn the jog wheel to quickly move through the list of
files or folders.
You can change the jog wheels resolution in the Console 4-Mx control DJ
panel (the Advanced tab).
E. Preview controls
Previewing = listening to a different track on your headphones than what
the : audience is hearing the cross fader (controlling the music for the
audience) has no impact on the preview.
There are of 3 types of preview controls:
1. Cue Select (left or right deck) transport button: selects the deck you
preview on your headphones (e.g. i -deck mode, n 2 Cue S ect Left el
Deck = deck A; in 4-deck mode, = deck A or C).
2. knob select what is heard on your headphones: Cue/Mix :
cue = the deck(s) selected with Cue Select button.
= same music as the audience. mix
or a combination of both, by setting it between Cue and Mix.
3. volume. Headphone
F. Mixer controls
2-deck mode
1. Gain knob: boosts/attenuates the track’s maximum output level.
2. Equalization (EQ) knobs (Treble Medium Bass/ / ): boosts/attenuates
the output level of the track per frequency range.
3. Kill buttons: mutes/restores the track output in the frequency range. ’s
4. Volume fader: sets the track level (within the scale set via the Gain
knob).
5. Cross fader: mixes left and right deck tracks for the audience:
full left = the audience hears only left deck(s).
center = the audience hears 50% left deck, 50% right deck.
full right = the audience hears only the right deck(s).
For different DJing styles, you n change the cross fader curve: ca
either in the software (with pro DJ software; not VDJ 7 LE 4-Mx).
or in the DJ Console 4-Mx control panel (the Advanced tab).
If you set a cross fader curve in other DJ software, keep the cross fader
curve set to Beatmix (default) in the Hercules control panel.
4-deck mode
After switching decks (via the buttons), you can control Deck C/Deck D
on the new virtual decks the same mix operations on the mixer controls,
but you must first take over the software positions of gradual controls
(gain/EQ/volume) on the deck: each gradual control must reach the same
position on the DJ Console 4-Mx hardware as shown in the software,
before you are able to control that setting.
The software takeover function provides you with gradual settings on
these controls after switching a deck:
- If there were no software takeover, after switching between 2 virtual
decks with different settings for gain/EQ/volume, the software would
jump to the new control position the second you move the gradual
control.
- Therefore, the software takeover is a process which lets you
smoothly reach the virtual setting prior to changing this setting.
G. Speed (BPM = Beats Per Minute) control
The playback speed has : 6 controls per deck
1. Pitch fader: the pitch fader changes the speed of the music: up =
slower, down = faster.
2. Pitch Scale -/+: these transport buttons change the scale of the pitch
f : a lower scale gives a more precise speed variation / a higher ader
scale gives a larger variation of the speed.
3. Pitch reset: by simultaneously pressing the Pitch Scale - + and
buttons, you reset the pitch, so that the virtual pitch fader goes back to
the center position, whatever the hardware position of the pitch fader.
4. Pitch Bend -/+: the pitch bend transport buttons slow down/speed up
the speed temporarily, as long as you keep the button down.
5. Sync: changes the speed setting for the deck the same BPM as on to
the other deck controlled by DJ Console 4- . Mx
6. Jog wheel: while music is playing, if you are not in scratch mode (if the
Scratch button is off, or if your hand applies no pressure on the jog
wheel), turning the jog wheel speeds up/slows down the music, like the
Pitch Bend buttons.
4-deck mode
After switching decks (with buttons), you must Deck C/Deck D take over
the virtual position of the pitch fader with the hardware pitch fader on
the deck (i.e. you must reach the same position with the DJ Console 4-
Mx pitch fader as in the software) prior to controlling the pitch.
H. 4-deck controls
2 transport buttons control 4-deck mode:
Deck C button converts deck A into deck C:
- when Deck C button is , the console left deck controls on ’s virtual
deck C, and the viewer shows the letter backlit in red. C
- when Deck C button is , the console left deck controls off s virtual
deck A, and the viewer shows the letter A backlit in blue.
Deck D button converts deck B into deck D:
- when Deck D button is , the console on ’s right deck controls virtual
deck D, and the viewer shows the letter backlit in red. D
- when Deck D button is , the console right deck controls off s virtual
deck B, and the viewer shows the letter backlit in blue. B


Product specificaties

Merk: Hercules
Categorie: DJ Party Music
Model: VirtualDJ 7 LE 4-Mx

Heb je hulp nodig?

Als je hulp nodig hebt met Hercules VirtualDJ 7 LE 4-Mx stel dan hieronder een vraag en andere gebruikers zullen je antwoorden