Numark DJ2GO2 Touch Handleiding

Numark Controller DJ2GO2 Touch

Lees hieronder de đź“– handleiding in het Nederlandse voor Numark DJ2GO2 Touch (24 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
User Guide
English ( 2 – 5 )
GuĂ­a del usuario
Español ( 6 – 9 )
Guide d’utilisation
Français ( 10 – 13 )
Guida per l’uso
Italiano ( 14 – 17 )
Benutzerhandbuch
Deutsch ( 18 – 21 )
Appendix
English ( 23 )
2
User Guide ( )English
Introduction
Box Contents
DJ2GO2 Touch
Mini-USB Cable
Software Download Card
1/8”-to-stereo-RCA Cable
Quickstart Guide
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit numark.com.
For additional product support, visit numark.com/support.
For complete warranty information: numark.com/warranty.
Setup
Items not listed under Introduction > Box Contents are sold separately.
Before you can begin using DJ2GO2 Touch with your computer, you must install a DJ software
application on your computer.
1. With a DJ software application installed on your computer, connect DJ2GO2 Touch to an
available USB port on your computer. (If possible, use a USB port on the rear panel of your
computer.)
2. On your computer, open your DJ software application.
3. Once the software opens, search for your music, video, and/or karaoke files.
4. Once a supported file is found, load the file to one of the software decks.
5. Repeat the process to assign a file to the other software deck.
Speakers
Headphones
Computer
3
Features
1. Mini-USB Port: Plug the included mini-USB cable into this port and into the USB port of
your computer to power DJ2GO2 Touch. DJ2GO2 Touch is class-compliant, so it is
"plug-and-play" – no separate driver installation is necessary.
2. PFL / Cue: Sends pre-fader audio to the Cue channel for monitoring.
3. Cue Gain: Adjusts the audio level of the Cue channel.
4. Master Gain: Adjusts the output volume of the Program mix.
5. Browse Knob: Turn this knob to scroll through a list of tracks and directories/folders in
the software. Press this knob to enter a directory/folder.
6. Load 1 / Load 2: Press one of these buttons while a track is selected to assign it to Deck
1 or Deck 2, respectively.
7. Channel Gain: Adjusts the audio level for the corresponding channel.
8. Crossfader: Blends audio playing between Decks 1 and 2. Sliding this to the left plays
Deck 1 and sliding to the right plays Deck 2.
9. Pad Mode: This determines the function of the 4 pad bank buttons. The 4 options are:
Hot Cue, Auto Loops, Manual Loops, and Sampler.
10. Jog Wheel: Move the touch capacitive wheel to control the playback position and scroll
throughout the current song.
11. Play / Pause: Starts or resumes playback if the Deck is paused. Pauses playback if the
Deck is playing. The LED will be OFF when there is no track loaded. The LED will flash
when a track is paused. The LED will be ON when a track is playing.
12. Buttons 1-4: These buttons send momentary MIDI messages based on the set Pad
Mode. See Operation > Pad Mode Controls for more information.
13. Cue: The Cue button will return and pause the track at the last set cue point. For
temporary play of the cue point, hold down the Cue button. The track will play for as long
as the button is held down and will return to the cue point once it has been released.
Hold down Cue and Play / Pause simultaneously to start playback from the cue point.
Release both buttons to allow playback to continue.
14. Sync: Press to automatically match the corresponding deck's tempo with the other
deck's tempo.
15. Pitch Fader: Controls the track's playback speed.
16. 1/8” (3.5 mm) Main Output: Connect this audio output to a mixer, powered speakers, or
an audio recorder.
17. 1/8” (3.5 mm) Headphone Output: Connect your headphones to this audio output.


Product specificaties

Merk: Numark
Categorie: Controller
Model: DJ2GO2 Touch
Soort bediening: Buttons, Rotary, Touch
Kleur van het product: Zwart
Ingebouwd display: Nee
Gewicht: 340 g
Breedte: 86 mm
Diepte: 314 mm
Hoogte: 16 mm
USB-poort: Nee
USB-connectortype: Mini-USB B
Type aansluitplug: 6,3 mm
Meegeleverde kabels: USB
Snelstartgids: Ja
Hoofdtelefoonuitgangen: 1
Aantal USB-aansluitingen: 1
Equalizer-instellingen: Nee
Ondersteunt Windows: Windows 10, Windows 7, Windows 8.1
Soort voeding: USB
Ondersteunt Mac-besturingssysteem: Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra
Mac-compatibiliteit: Ja
Sample rate: 44.1 kHz
Minimale processor: i3, i5 or i7
Apple docking: Nee
USB direct afspelen: Nee
Ingebouwde optical-drive: Nee
Aantal scratcher-platters: 2
Mixersectie: Ja
Aantal mixerkanalen: 2 kanalen
MIDI: 16 Bit
Crossfader: Ja
RAM minimum: 4 GB
Minimale processorsnelheid: 1.07 GHz
Aantal drumpads: 8

Heb je hulp nodig?

Als je hulp nodig hebt met Numark DJ2GO2 Touch stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Controller Numark

Handleiding Controller

Nieuwste handleidingen voor Controller