Netgear XE102 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Netgear XE102 (22 pagina's) in de categorie Powerline adapter. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
202-10114-01
June 2007
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
XE102 Wall-Plugged
Ethernet Bridge
User Guide
ii
v1.0, June 2007
© 2007 by NETGEAR, Inc. All rights reserved. June 2007.
Trademarks
NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows, and Windows NT are registered trademarks of
Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective
holders.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice. NETGEAR does not assume any liability that
may occur due to the use or application of the product(s) or circuit layout(s) described herein.
Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Bestätigung des Herstellers/Importeurs
Es wird hiermit bestätigt, daß das XE102 Wall-Plugged Ethernet Bridge gemäß der im BMPT-AmtsblVfg 243/1991 und
Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das vorschrifts Geräte (z.B. Testsender) mäßige Betreiben einiger
kann jedoch gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die Anmerkungen in der Betriebsanleitung.
Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt
gebracht wurde und es ist berechtigt, die Serie auf die ErfĂĽllung der Vorschriften hin zu ĂĽberprĂĽfen.
Certificate of the Manufacturer/Importer
It is hereby certified that the XE102 Wall-Plugged Ethernet Bridge has been suppressed in accordance with the
conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example,
test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the
notes in the operating instructions.
Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and has been granted the right to test the series for compliance with the regulations.
v1.0, June 2007
iii
Product and Publication Details
Technical Support
See the support information card that shipped with your product. By registering your product at
http://www.netgear.com/register, we can provide you with faster expert technical support and
timely notices of product and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support
information card.
E-mail: support@netgear.com
Web site: http://www.netgear.com
Model Number: XE102
Publication Date: June 2007
Product Family: Ethernet bridge
Product Name: XE102 Wall-Plugged Ethernet Bridge
Home or Business Product: Home
Language: English
Publication Part Number: 202-10114-01
Publication Version Number: 1.0


Product specificaties

Merk: Netgear
Categorie: Powerline adapter
Model: XE102
Gewicht: 224 g
Stroomvoorziening: 220V@ 50 Hz
Connectiviteitstechnologie: Bedraad
Ethernet LAN: Ja
Frequentieband: 0.0043 - 0.0209 GHz
Interface: RJ-45
Bekabelingstechnologie: 10Base-T(X)
Netwerkstandaard: IEEE 802.3
Aansluitingen: 1x 10BASE-T Ethernet\n1x 14 Mbps Powerline
Compatibele besturingssystemen: Windows 98/ME/2000/XP
Afmetingen (B x D x H): 99.4 x 46.6 x 73 mm
Elektromagnetische emissie: FCC Part 15 Class B
Bedrijfstemperatuur (T-T): 0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 90 procent
Max bereik binnenshuis: 45 m²

Heb je hulp nodig?

Als je hulp nodig hebt met Netgear XE102 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Powerline adapter Netgear

Handleiding Powerline adapter

Nieuwste handleidingen voor Powerline adapter