Netgear XAV101 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear XAV101 (36 pagina's) in de categorie Powerline adapter. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
202-10339-02
January 2009
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
XAV101 Powerline AV
Ethernet Adapter User
Guide
ii
v2.0, January 2009
© 2009 by NETGEAR, Inc. All rights reserved.
Technical Support
See the support information card that shipped with your product. By registering your product at http://www.netgear.com/
register, we can provide you with faster expert technical support and timely notices of product and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.
E-mail: support@netgear.com
website: http://www.netgear.com/support
Trademarks
NETGEAR and the NETGEAR logo are registered trademarks, and RangeMax and Smart Wizard are trademarks of
NETGEAR. Inc. in the United States and/or other countries. Microsoft, Windows, and Windows NT are registered
trademarks and Windows Vista is a trademark of Microsoft Corporation. Other brand and product names are registered
trademarks or trademarks of their respective holders. Information is subject to change without notice.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice. NETGEAR does not assume any liability that
may occur due to the use or application of the product(s) or circuit layout(s) described herein.
Maximum Wireless Signal Rate Derived from IEEE Standard 802.11 Specifications
Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic,
building materials and construction, and network overhead, lower actual data throughput rate.
Safety Instructions
Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential
damage.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the following
precautions.
• Observe and follow service markings.
- Do not service any product except as explained in your system documentation.
- Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose you to
electrical shock. Only a trained service technician should service components inside these compartments.
• If any of the following conditions occur, unplug the product from the electrical outlet and replace the part or contact
your trained service provider:
- The power cable, extension cable, or plug is damaged.
- An object has fallen into the product.
- The product has been exposed to water.
- The product has been dropped or damaged.
- The product does not operate correctly when you follow the operating instructions.
• Keep your system away from radiators and heat sources. Also, do not block cooling vents.
v2.0, January 2009
iii
• Do not spill food or liquids on your system components, and never operate the product in a wet environment. If the
system gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider.
• Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by shorting out
interior components.
• Use the product only with approved equipment.
• Allow the product to cool before removing covers or touching internal components.
• Operate the product only from the type of external power source indicated on the electrical ratings label. If you are
not sure of the type of power source required, consult your service provider or local power company.
• To help avoid damaging your system, be sure that the voltage selection switch (if provided) on the power supply is
set to match the power available at your location:
- 115 volts (V), 60 hertz (Hz) in most of North and South America and some Far Eastern countries such as South
Korea and Taiwan
- 100 V, 50 Hz in eastern Japan and 100 V, 60 Hz in western Japan
- 230 V, 50 Hz in most of Europe, the Middle East, and the Far East
• Also, be sure that attached devices are electrically rated to operate with the power available in your location.
• Use only approved power cables. If you have not been provided with a power cable for your system or for any AC
powered option intended for your system, purchase a power cable that is approved for use in your country. The
power cable must be rated for the product and for the voltage and current marked on the product’s electrical ratings
label. The voltage and current rating of the cable should be greater than the ratings marked on the product.
• To help prevent electric shock, plug the system and peripheral power cables into properly grounded electrical
outlets.
• The peripheral power cables are equipped with three-prong plugs to help ensure proper grounding. Do not use
adapter plugs or remove the grounding prong from a cable. If you must use an extension cable, use a three-wire cable
with properly grounded plugs.
• Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into
the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or
power strip.
• To help protect your system from sudden, transient increases and decreases in electrical power, use a surge
suppressor, line conditioner, or uninterruptible power supply (UPS).
• Position system cables a bles so that they cannot be stnd power cables carefully; route ca epped on or tripped over. Be
sure that nothing rests on any cables.
• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications.
• Always follow your local and national wiring rules.
• Move products with care; ensure that all casters and stabilizers are firmly connected to the system. Avoid sudden
stops and uneven surfaces.


Product specificaties

Merk: Netgear
Categorie: Powerline adapter
Model: XAV101
Kleur van het product: Wit
Gewicht: 180 g
Breedte: 98 mm
Diepte: 40 mm
Hoogte: 72 mm
Snoerlengte: 1.51 m
Stroomvoorziening: 100-240V @ 50-60 Hz
Connectiviteitstechnologie: Bedraad
Ethernet LAN: Ja
Certificering: FCC Part 15 Class B\nCE\nC-Tick\nUL
Intern: Nee
Compatibele besturingssystemen: Microsoft Windows Vista, 2000, XP
Hostinterface: RJ-45
Maximale overdrachtssnelheid van gegevens: 200 Mbit/s
Afmetingen (B x D x H): 98 x 40 x 72 mm
Link/Act LED: Ja
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 90 procent
Aantal poorten: 1

Heb je hulp nodig?

Als je hulp nodig hebt met Netgear XAV101 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Powerline adapter Netgear

Handleiding Powerline adapter

Nieuwste handleidingen voor Powerline adapter