Netgear ANT2405 Handleiding

Netgear Niet gecategoriseerd ANT2405

Lees hieronder de 📖 handleiding in het Nederlandse voor Netgear ANT2405 (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 105 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7

Installation Guide

5 dBi Omni-directional Antenna

ANT24O5

Placement and Other Important Considerations

In order to maximize coverage, antennas must be placed in a good spot. A lot of improvement

can be achieved by optimizing the line of sight between antennas. Try to minimize the

partitions and partial obstructions if possible. For instance, place the antenna on a wall above

the cubicles (cubicles generally include a metal foil). Ideal placement is against a wall, 2m high,

or on the ceiling facing the area to cover.

The longer the antenna cable, the higher the attenuation, or signal loss. This will decrease the

range and performance. The best performance is achieved with a short cable between the

antenna and the wireless device. The shortest FCC approved antenna cable is the NETGEAR

1.5 M (ACC-10314-01) cable. For optimal performance, use a low-loss NETGEAR antenna

cable up to 10 meters long.

If the wireless access point, router or gateway is in a IT room, place the antenna outside of the

room close to the ceiling against a wall. Use a NETGEAR antenna cable of up to 10 meters in

length to connect the antenna to the wireless access point.

Approximate

coverage area

Cubicles

1.5m high

ANT24O5

Figure 1: Optimal antenna placement on the ceiling

Product specificaties

Merk:	Netgear
Categorie:	Niet gecategoriseerd
Model:	ANT2405
Kleur van het product:	Wit
Frequentieband:	- GHz
Bedoeld voor:	Binnen
Netwerkstandaard:	IEEE 802.11g
Soort antenne:	Omnidirectionele antenne
Antenne versterkingsniveau (max):	5 dBi
Compatibele producten:	WAG102