NEP BDB-2.76L Handleiding
NEP
Niet gecategoriseerd
BDB-2.76L
Bekijk gratis de handleiding van NEP BDB-2.76L (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.9 sterren uit 4 reviews. Heb je een vraag over NEP BDB-2.76L of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
BDB-2.76L Wall-mounted and floor-mounted
integrated energy storage user manual
USER'S
MANUAL
Dear users:
Thank you very much for choosing our products! Before using this product, please read
this manual carefully, which includes the installation, use, and Troubleshooting and other
important information and suggestions, and take good care of this manual! Product
specifications are subject to upgrading without prior notice.
CATALOGUE
1.Basic information of the manual
2.Product introduction
3.Installation instructions
4.Description of the use of the functions
5.Product parameters
6.Appearance size
7.Storage and packaging
8.Battery recycling instructions
1
2
3
6
11
12
12
13
1. Basic information of the manual
1.1 This manual is applicable to the integrated integrated power supply
51.2V/54Ah series products for home energy storage applications produced
by Suzhou Enyipu Technology Co., LTD.
1.2 Target group
This manual is used by the end users. No specific qualification operation can
also be handled by the end user itself. However, you need to know the
following information:
(1) Understand the working operation of battery products;
(2) Understand and comply with this manual and all safety knowledge.
1.3 Safety Code
For safety, the installer is responsible to be familiar with the contents of this
manual and all warnings prior to installation.
Warn
(1) Environmental requirements:
・Do not expose the battery to temperatures above 60℃;
・Do not place the battery near any heat source;
・Do not expose the batteries to damp or liquid;
・Do not expose the battery to corrosive gases or liquids;
・Do not expose the battery to direct sunlight for a long time;
・Place the battery in a safe position away from children and animals;
・The battery is heavy, at least two people operate when handling and installation;
・to avoid battery falling and injuring personnel;
・Do not place items on the battery;
(2) Operation precautions:
・This product is a low-pressure product, which is prohibited to use in series;
・Do not remove the battery without permission;
・Do not use the conductor to contact the battery terminals;
・Do not contact the battery pack with wet hands;
・Do not squeeze, fall, or puncture the battery;
・Handle products according to local safety regulations;
・Store the battery as described in this user manual;
・Do not short circuit the batteries, remove all jewelry items that may cause
short circuit before installation and handling; do not use damaged or
deformed batteries;
・Disconnect the battery from the power supply / load before installation and
maintenance, and then power off the battery;
・Do not stack batteries when storage or handling;
The battery has self-discharge phenomenon, and is not used for a long time,
all switches should be placed in a closed state, and the battery should be
powered regularly for 6 months.
-1-
3. Installation instructions
3.1 Unpacking inspection constitute a complete
(1) Open the packaging of the equipment, please check the product
accessories: a host, bracket, card, wire harness, screws, etc;
(2) Check whether the equipment is damaged in transportation. If any damage
or accessories are missing, do not start the machine and inform the carrier and
dealer.
3.2 Notes for installation and storage
(1) The installation equipment can be installed by itself, or operated by
professionals;
(2) The battery can be installed on a solid wall or landed on the ground;
(3) When transporting equipment, take proper protective measures: When the
equipment is moved from a low temperature environment to a high
temperature environment, water may appear Beads should be completely
dried before use to ensure safety;
(4) Do not expose the equipment to harsh environments such as damp,
flammable and explosive or large accumulation of dust; Do not cover and
block Plug the vent, reserve more than 10CM air flow gap around the
equipment; In order to have good heat dissipation;
(5) When the equipment is not used for a long time, all switches of the side
panel must be placed in the off state
3.3 Instructions for floor-type installation
2. Product introduction
This product is 51.2V DC pool system, applied in the field of home energy
storage, with inverter and other equipment, constitute a complete System, to
meet the daily electricity demand of households.
2.1 Functional characteristics
・ Using the lithium iron phosphate battery with high safety performance;
・ The equipment has a perfect protection function;
・With high-precision voltage and current sampling and SOC estimation ability;
2.2 Product overview
Step 1: The recommended distance of battery pack installation space is shown
above, which can reduce the distance on the operational basis.
-2- -3-
＞300mm
＞300mm
＞300mm
＞200mm
Product specificaties
| Merk: | NEP |
| Categorie: | Niet gecategoriseerd |
| Model: | BDB-2.76L |
Heb je hulp nodig?
Als je hulp nodig hebt met NEP BDB-2.76L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd NEP
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
2 September 2024
2 September 2024
2 September 2024
27 Augustus 2024
Handleiding Niet gecategoriseerd
- Lastolite
- OnePlus
- Theben
- Amana
- Eowave
- Lanaform
- Fanvil
- Baxi
- Brita
- Hudora
- Morningstar
- WHD
- HiFi ROSE
- Jungle Gym
- Spelsberg
Nieuwste handleidingen voor Niet gecategoriseerd
14 September 2025
14 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025