Neewer Z3-S Handleiding

Bekijk gratis de handleiding van Neewer Z3-S (15 pagina’s), behorend tot de categorie Flitser. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.1 sterren uit 6 reviews. Heb je een vraag over Neewer Z3-S of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Firmware will be upgraded as the camera is updated.

Stable output, High speed continuous flash and color temperature

with good even lighting.

Supports manual frequency flash mode, HSS/second curtain sync

/FEC and other TTL functions.

Built-in 2.4GHz wireless transmission, Integrated transmitter and

receiver with a large radius.

Full-color touchscreen for easier operation.

Supports TTL auto flash, which can be used as the master or

slave unit of a wireless multi-lamp flash system - making shooting

easier and faster.

3000mAh Li-polymer battery with an autonomy of 500 flashes at

full power, 1.7 seconds fast recharge.

Maximum flash power of 100Ws, 81 levels of dimming (1/1~1/256)

The upgraded quartz tube supports up to 100,000 flashes during

its lifespan.

ENEN

0201

02

02

03

03

06

07

08

08

11

12

13

22

23

25

27

28

29

30

30

M: Manual Flash

MULTI Stroboscopic Flash

Wireless Flash Shooting: Wireless (2.4G) Transmission

1. TTL Mode

2. Flash Exposure Compensation

3. High-Speed Sync

4. Second-Curtain Sync

Wireless Flash Shooting: Wireless (2.4G) Transmission

Other Applications

C.Fn: Setting Custom Functions

Protection Function

Technical Data

Troubleshooting

Firmware upgrade

Restore factory settings

Compatible Cameras

30

Z3-S is a TTL speedlite flash designed for Nikon cameras. With

TTL auto flash, you will automatically get the accurate amount of

flash exposure for variable lighting conditions, thereby improving

your overall shooting experience. The following features set it apart

from the competition:

CatalogForeword

Precautions

Foreword

Precautions

Package Contents

Name of components

Battery

Power Management

Mount / Unmount flash

Flash Mode: TTL Auto flash

1. Wireless Setup

2. Flash Group Mode Selection

3. Setting the communication channel

4. Wireless ID Settings

5. Scan for a free, unused channel

6. Built in 2.4G Wireless Q and X Systems

7. Wireless Sync

8. TTL: Automatic wireless flash photography

9. M: Manual Wireless Flash Shooting

10.Multi: Stroboscopic Wireless Flash

1. Sync Triggering

2. Auto Focus Assist Beam

3. TCM - One key switching TTL/M mode

4. Bounce Flash

5. ZOOM: Set the flash coverage

6. Modeling Lamp

7. Modeling Flash

Thank you for your purchase of a product.

1. Always keep this product dry.

3. Do not disassemble or modify the product.

2. Keep this product out of reach of children.

4. Do not subject to any form of physical shock. The product

shouldn't be exposed to fire or an environment where the

temperature exceeds 50 degrees.

5. Do not fire the flash directly into the eyes which could result in

visual impairment.

6. Do not use the product near chemicals, flammable gases or

other volatile substances which may cause fire or

electromagnetic interference.

7. Do not use in the rain or in damp conditions.

8. Turn off the product immediately, if it appears to be operating

abnormally, and try to troubleshoot the likely cause.

9. Failure to comply with the recommendations and warnings

listed in the manual will invalidate the warranty.

Product specificaties