Nedis SmartLife App Smart Home Handleiding
Nedis
Smart Home
SmartLife App Smart Home
Lees hieronder de đź“– handleiding in het Nederlandse voor Nedis SmartLife App Smart Home (8 pagina's) in de categorie Smart Home. Deze handleiding was nuttig voor 796 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
Full manual Nedis SmartLife™
Download the app: Nedis SmartLife from Apple App store or Google Play Store.
Create account
Select country code and enter full national phone number or email address and then
request verification code.
Enter received verification code and pick your own password.
Add device
1. Tap “+” on the top right corner. A list of potential products appears.
2. Select the device type you want to add from the list
3. Activate the device to be added by plugging it in or connecting the battery.
4. Make sure the indication LED (or the lighting device) flashes quickly (as shown in example in the
application) and tap the button to confirm.
If the light is not flashing quickly hold the reset button (or switch the bulb off and on for 3 times) until
it flashes.
5. Confirm your phone is connected to the Wi-Fi network to which the device will be added, enter the
Wi-Fi password and confirm.
6. Now the device will be searched, make sure your phone and the device are close to the router to
optimize reception.
7. After the product is found and added, rename it so you can easily recognize it.
If above method fails (this can be due to unstable network or specific network protection) add the device using
AP mode by following the steps below.
Add device (AP mode)
1. Tap “+” on the top right corner. A list of potential products appears.
2. Select the device type you want to add from the list
3. Hold the reset button (or switch the bulb off and on for 3 times) until the indication LED (or lighting
device) flashes SLOWLY (as shown in example)
If the light is flashing quickly, reset again by holding the reset button for about 5 seconds or switching
the light off and on 3 times.
4. Confirm the Wi-Fi network to which the device will be added, enter the Wi-Fi password and confirm.
5. Connect your phone to the device’s Wi-Fi hotspot (SmartLife_xxxx)
6. If asked: confirm to stay connected to Wi-Fi network without internet access
7. Go back to the Nedis SmartLife application to continue installation.
8. Now the device is sent the instructions to connect to your existing Wi-Fi network, make sure your
phone and the device are close to the router to optimize reception.
9. After the product is found and added, rename it so you can easily recognize it.
Connecting to Amazon Alexa
(only required for first time use of Nedis SmartLife in combination with Amazon Alexa)
1. An official Alexa device and Amazon Alexa account are required
2. Open Amazon Alexa App on your smartphone and login
3. Open the menu by tapping on the upper left corner
4. Go to Skills
5. Search for “Smart Life” and tap Enable
6. You will be redirected to a login page to confirm the country/region and enter your Nedis SmartLife
account and password. Then confirm you are using the app SmartLife
7. Authorize Amazon to use your profile and connect with your products
8. After successful link is confirmed, close the window and go back to homescreen of Amazon Alexa app
to add your smart product(s).
Add product(s) to Amazon Alexa
9. After you have installed new products in the SmartLife application, ask “Alexa, discover devices” or
open the Amazon Alexa app – menu – Smart Home and tap “+ Add Device”
10. In about 20 seconds, the products will automatically be added to the Alexa product list and can then
be controlled using Amazon Alexa.
Connecting to Google Home / Google Assistant
(only required for first time use of Nedis SmartLife in combination with Google Home
1. Hold the home button to start Google Assistant
2. Tap on the compass in the upper right corner to explore Assistant’s functionality
3. Now open the menu on the upper right corner and go to Settings
4. Open “Home Control”
5. Tap “+” to add products
6. Search for “Smart Life” to add this skill
7. Confirm your country code and enter your Nedis SmartLife account name and password
8. Then confirm you are using the app SmartLife
9. Authorize Google to use your profile and connect with your products
10. Any installed products as well as created scenes or automations are automatically being linked, you
can assign a room to each product.
Add product(s) to Google Home / Google Assistant
11. After you have installed new products or created new scenes or automations in the SmartLife
application, ask Google Assistant to “Sync devices” so they can be controlled or activated using
Google Home.
App interface:
My Family (main screen)
Product specificaties
| Merk: | Nedis |
| Categorie: | Smart Home |
| Model: | SmartLife App Smart Home |
Vragen van gebruikers
Waar komt de microship in de buitencamera van nedis
Tamme Storteboom - 3 Juli 2023Heb je hulp nodig?
Als je hulp nodig hebt met Nedis SmartLife App Smart Home stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Smart Home Nedis
14 December 2022
Handleiding Smart Home
- Smart Home Bticino
- Smart Home Alecto
- Smart Home Aqara
- Smart Home Edimax
- Smart Home Eufy
- Smart Home Hama
- Smart Home Iungo
- Smart Home LSC Smart Connect - Action
- Smart Home Qnect
- Smart Home Rademacher
- Smart Home Salus
- Smart Home Strong
- Smart Home Swisstone
- Smart Home Technisat
- Smart Home Tjilla
- Smart Home Trust
- Smart Home Veho
- Smart Home Caliber
- Smart Home Hombli
- Smart Home Silvergear
Nieuwste handleidingen voor Smart Home
11 Oktober 2023
9 Oktober 2023
9 Oktober 2023
9 Oktober 2023
9 Oktober 2023
9 Juli 2023
9 Juli 2023
23 December 2022
23 Juli 2023
23 Juli 2023