Nec W32-70 Handleiding

Nec Flat panel steun W32-70

Lees hieronder de 📖 handleiding in het Nederlandse voor Nec W32-70 (4 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

www.unicol.com www.unicol.de Page 1 necinstw3270/0809 www.nec-display-solutions.com

W32-70 INSTALLATION INSTRUCTIONS

UNIVERSAL WALL MOUNT

For 32” to 70” LCD range of flat screens

W32-70 Tilting Wall Mount

For mounting screens both in Landscape and Portrait

www.unicol.com www.unicol.de Page 2 necinstw3270/0809 www.nec-display-solutions.com

W32-70 INSTALLATION INSTRUCTIONS

INSPECT THE UNIT BEFORE INSTALLING

WARNING: Watch for pinch points. Do not put your fingers between movable parts.

1. Carefully inspect the Mount for shipping damage. If any damage is apparent, call your carrier claims agent and

do not continue with the installation until the carrier has reviewed the damage.

NOTE: Read all instructions before starting the installation.

2. Lay out components to ensure you have the required parts before proceeding (see Parts List below).

CAUTION: To prevent damage to the mount, study all instructions and illustrations before you begin the installation.

Failure to do so could render the Warranty for the mount and the equipment that attaches to it null and void. Pay

particular attention to the “Warnings” displayed in these Instructions.

WARNING: The W32-70 wall mount is designed to be only installed onto walls.

The maximum weight to be installed on the W32-70 wall mount is 100 Kg (220 Lbs)

Parts List:

Screws to fix mount to wall are not included.

We have supplied a Universal Screen Fixing Kit with this mount.

Consult the table in Step 2 for the correct number and size of fixings for your screen.

Wall Plate (A)

Each Wall Plate has 4 x M10 x 25 Hex head screws

(2 at each side) for securing Screen Plate.

Universal Screen Fixing Kit contains:

4 x M6 x 12 pozi pan head screws

Screen Plate (B)

www.unicol.com www.unicol.de Page 3 necinstw3270/0809 www.nec-display-solutions.com

W32-70 INSTALLATION INSTRUCTIONS

INSTALLING BACK PLATE (A)

1. Determine the exact mounting location on the wall prior to

installation. Consider where the cables are routed from the

wall in relation to the holes in the back plate.

WARNING: Improper installation can result in serious personal

injury. Make sure that the structure can support a redundant

weight factor five times the total weight of the equipment: if not,

reinforce the structure before installing the mount.

2. Using the Wall Plate (A) as a template, mark, drill and plug

wall using all fixing slots, fix the Wall Plate to the wall

ensuring that the Plate is level.

CAUTION: We recommend installation by a Qualified

Tradesperson, using masonry plugs or other reliable fixings to

ensure safe installation. Consult your builder or architect if in

doubt.

INSTALLING SCREEN PLATE (B)

Fix the Screen Plate (B) to the screen using the fixing screws provided for your screen: Ensure the flat side of

the plate is against the screen and the plate is centred on the fixing points.

LCD model Fixing LCD model Fixing Fixing LCD model

M401

M461

M6 x 4

P401

P461

P521

M6 x 4

X461HB

X461UN

M6 x 4

SCREEN POSITIONS

There are 2 positions that the Screen Plate can mount to the Wall Plate; See next page. Position B places the screen

further from the wall than Position A, allowing larger screens enough room from the wall to be able to tilt. In general

Position A (closest the wall) can be used for most screen sizes other than a tilting 65” - 70” screen. However, if more

tilt is required then Position B can be used.

Product specificaties

Merk:	Nec
Categorie:	Flat panel steun
Model:	W32-70
Kleur van het product:	Zwart
Gewicht:	9000 g
Montagewijze:	Muur
Geschikt voor schermmaten:	32 - 70 "
Maximale gewichtscapaciteit:	90 kg
Paneelmontage-interface:	200 x 200,300 x 300,400 x 400 mm
Compatibiliteit:	LCD3215\nLCD4215\nLCD4615\nLCD5220\nLCD5710\nLCD6520\nV321\nV461\nP401\nP461\nP521\nX461UN\nX461HB\nM40\nM46\nM401\nM461
Montage interface compatibiliteit (min):	200 x 200 mm
Montage interface compatibiliteit (max):	400 x 400 mm
Bereik kantelhoek:	10 - 10 °