Nec MultiSync LCD5220 Handleiding

Nec Monitor MultiSync LCD5220

Lees hieronder de 📖 handleiding in het Nederlandse voor Nec MultiSync LCD5220 (2 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

1.1) Lay LCD on a mat as in Fig.1 (in order not to damage LCD).

1.2) Remove STAND

(if used) and BEZEL

(Number of screws

that hold the STAND

is 2 pieces.

Number of screws

that hold the BEZEL

is 12 pieces.)

3.2) Put protective glass on the panel.

NOTE Align edge (refer to Fig. 3.4).:

3.3) Reinstall the BRACKET PWB IR and rear cover.

(Number of screws that hold the rear cover is 3 pieces.)

NOTE: Adjust the position of BRACKET PWB IR to the

lower hole.

Figure 3.1 Figure 3.2

Figure 3.3

Figure 3.5

Figure 3.4

Align edge

60mm

2.1) Remove the part of the rear cover indicated in figure 2.1 and

the BRACKET PWB IR. (Number of the screws that hold the

rear cover is 3 pieces.)

3.1) Paste TAPE-1 (DOUBLE sided ADHESIVE TAPE) and peel

the paper off. Specification of TAPE-1 should be equivalent

to "3M VHB tape 9473".

NOTE: 1. Do not paste TAPE-1 on panel's active area.

2. Do not paste TAPE-1 on the area in Fig. 3.2.

Figure 1

Figure 2.1

Figure 2.2

Adjust the position of BRACKET

PWB IR to the lower hole.

Remove BRACKET PWB IR

rear cover

Remove the three screws

Paste TAPE-1 on this area

Do not paste TAPE-1

on this area. This note

refers to all 4 corners.

BRACKET PWB IR

INSTALLATION MANUAL

PROTECTIVE GLASS

FOR MULTISYNC

LCD4020,

LCD4620 LCD5220AND

NECESSARY COMPONENTS:

- 1 piece protective glas (supplied)

- brackets (supplied) (40"-11pcs, 46"-13pcs, 52"-12 pcs)

- tape, "3M VHB tape 9473" or equivalent (not supplied)

- tape, "Scotchfoam 4718 3,2/12,7mm" or equivalent (not supplied)

Product used for demonstration in this manual: LCD4020

Figure 4.3 Position A Position B 6.2) Finish

6.1) Install screws and put screw labels back on.

(Number of screws that hold BEZEL is 12 pieces.

Number of labels is 12 pieces.)

Figure 4.4

Figure 5.1 Figure 5.2

Figure 6.1

Figure 6.3

Figure 6.2

Figure 5.3

Figure 5.4

Figure 4.2

4.2) Paste 11 pieces of BRACKET-4 to panel.

NOTE: 1. Adjust the position of BRACKET-4 to the upper hole

in case of POSITION A.

2. Adjust the position of BRACKET-4 to the lower hole in case

of POSITION B.

Figure 4.1

4.1) Paste TAPE-2 (DOUBLE sided ADHESIVE TAPE) on

BRACKET-4 and peel off the paper.

(Number of BRACKET-4 is 11 pieces.) Specification of

TAPE-2 should be equivalent to "3M VHB tape 9473".

NOTE: Do not paste TAPE-2 on the holes.

Adjust the position of BRACKET

PWB IR to the upper hole.

Adjust the position of

BRACKET-4 to the lower hole.

Align edge

Original

Protection glass

10 mm

5 mm

5.1) Paste TAPE-3. Specification of TAPE-3 should be equivalent

to "

Scotchfoam 4718 3,2 / 12,7mm

". Ideal Size: 5mm (H) X 10mm

(W) (Fig. 5.2) NOTE: Align the edges of the panel and the glass

(refer to Fig.5.1). 2.Carefully move the BRACKET PWB IR as in

Fig. 5.3, when pasting TAPE-3.

Paste TAPE-2 on this area

BRACKET-4 TAPE-2

A AA

Peel paper off after pasting TAPE-2

TAPE-3

Product specificaties

Merk:	Nec
Categorie:	Monitor
Model:	MultiSync LCD5220
Kleur van het product:	Zwart
Gewicht:	44300 g
Breedte:	1200 mm
Diepte:	147.5 mm
Hoogte:	696 mm
Gewicht verpakking:	55500 g
Gebruikershandleiding:	Ja
Beeldscherm:	LCD
Beeldschermdiagonaal:	52 "
Resolutie:	1920 x 1080 Pixels
Meegeleverde kabels:	AC, VGA
Typische contrastverhouding:	2000:1
Helderheid:	500 cd/m²
Snelstartgids:	Ja
Aantal HDMI-poorten:	1
Componentingang video (YPbPr/YCbCr):	1
S-Video ingang:	1
Bevestigingsmogelijkheid voor kabelslot:	Nee
Stroomverbruik (in standby):	5 W
HD type:	Full HD
3D:	Nee
Responstijd:	- ms
Pixel pitch:	0.60 x 0.60 mm
Ondersteunde grafische resoluties:	1920 x 1080 (HD 1080)
VESA-montage:	Ja
Paneelmontage-interface:	200 x 200 mm
Bezel breedte (zijkant):	- mm
DVI-D poorten:	1
Duurzaamheidscertificaten:	ENERGY STAR
Computersysteem:	Nee
Beeldverhouding:	16:9
Ingebouwde camera:	Nee
Plug and play:	Ja
Voldoet aan industriestandaarden:	DDC/CI
Grootte beeld (horizontaal):	1152 mm
Grootte beeld (verticaal):	648 mm
Productontwerp:	Digitale signage flatscreen
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	270 W
Bedrijfstemperatuur (T-T):	5 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent