My Wall HL 48 ML Handleiding

Bekijk gratis de handleiding van My Wall HL 48 ML (2 pagina’s), behorend tot de categorie Wandsteun. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.8 sterren uit 6 reviews. Heb je een vraag over My Wall HL 48 ML of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Upward Movement

Press the button, the TV mount will

move upward to the lowest-prole

position against the ceiling. Press the

OK button to stop the motion.

(Tips: Clear up all obstacles

within the range of motion.)

Left Side Movement

Press the button, the TV mount will move to

the left side (90° by default). When swiveling

the TV mount to the left 90°, then press the

OK button, the mount will return to the

default position (middle position).

Right Side Movement

Press the button, the TV mount will move to the right side

(90° by default). When swiveling the TV mount to the

right 90°, then press the OK button, the mount will return to the

default position (middle position).

Memory Setting1

Press the button for 1 second and you will hear a

beep, indicating that the current position

has been saved to memory.

Recall Memory

Press the button and the mount will

automatically get to the position saved

in the corresponding button mem1.

Recall Memory

Press the button and the mount will

automatically get to the position saved

in the corresponding button mem2.

Memory Setting2

Press the button for 1 second and

you will hear a beep, indicating that

the current position has been saved

to memory.

Downward Movement

Press the button, the TV mount will move

downward to the maximum tilt angle position (75° by

default). Press the OK button to stop the motion.

(Tips: Clear up all obstacles within the range of motion.)

: Stop Button

OK

Never operate the mount without a TV installed!

Before power connection, be sure that bracket and the TV installed correctly.

Keep the children away from power. Do not swivel the mount using hands.

!

RMT-03 remote control, 2x AAA battery (not included)

HL 48 ML / HL 48 MWL

Coding of Remote Controller and Control Box

Step 1: When the mount is powered on, press the small button on the control box with a thin tool as shown.

The unit emits a beep, indicating that the control box is on standby for program coding.

Step 2: Press the SET button on the remote control within 10 seconds after Step 1. The control box will repeat beeps for

approximately 10 seconds indicating that the remote control is being programmed. The process will automatically nish when you

no Ionger hear any beeps.

NOTE:The TV Mount can be matched with up to 20 remote controllers. To clean up the data of all the remote controllers and the

phone, press and hold the code matching button for 5 seconds then release. The unit will emits two beeps conrm the

successful clean up and vice versa.

Reset Mode

If the TV mount can‘t be adjusted to the highest position (0° against the ceiling) or the lowest position (max. tilting position), unplug and

re-plug the power. Then press and hold the OK button for 5 seconds. Mount will retract to the highest position, that means the system has

been successfully reset.

Note: Long press

SET for 5 seconds to disconnect the device from the app.

Hereby, Transmedia Kabelverbindungen GmbH declares that the Folding Suspension Brackets for Flat Screens

HL 48 ML and HL 48 MWL are in compliance with Directive 2014/53/EU. The full text of the EU declaration of

conformity is available at the following internet address: https://www.transmedia-germany.com/download

Product specificaties