Muse MD-205 LD Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Muse MD-205 LD (2 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
ALIMENTATION
STROMVERSORGUNG
POWER SUPPLY
ALIMENTAÇÃO
LIGANDO/DESLIGANDO O APARELHO
AUDIÇÃO DO RÁDIO
LISTENING TO THE RADIO
TURNING UNIT ON/OFF
ÉCOUTE DE LA RADIO
RADIO HÖREN
MISE EN MARCHE ET ARRET DE LAPPAREIL
EINSCHALTEN/ AUSSCHALTEN DES GERÄTS
LISTENING TO CD
ESCUTANDO UM CD
ECOUTER UN CD
CONNECTING AUXILIARY SOURCE
UTILIZAÇÃO DA ENTRADA AUXILIAR
CONNEXION D'UNE SOURCE AUXILIAIRE
MAINTENANCE
MANUTENÇÃO
MAINTENANCE
TECHNICAL SPECIFICATIONS
ESPECIFICAÇÕES
FICHE TECHNIQUE
INSTRUCTIONS IMPORTANTES SUR LA SECURITE
IMPORTANT SAFETY INSTRUCTION
INSTRUÇÕES DE SEGURANÇA IMPORTANTES
ATTENTION: Pour réduire le risque de choc électrique, ne
pas ouvrir l'appareil, il n'y a aucune partie à l'intérieur destinée
à l'utilisateur. Conez toutes les réparations à un personnel
qualié.
CAUTION: To reduce the risk of electric shock, do not open the
device, there is no party inside for the user. Refer all servicing to
qualied personnel.
ATENÇÃO: Para reduzir o risco de choque eléctrico, não
desmonte o aparelho. O aparelho não contém qualquer peça
passível de ser reparada pelo utilizador. Cone todas as
operações de manutenção a um técnico qualicado.
AVERTISSEMENT: POUR PRÉVENIR TOUT RISQUE D’INCENDIE OU DE CHOC
ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À LHUMIDITÉ.
ATTENTION: Radiations laser invisibles lorsque les dispositifs de curité sont ouverts
ou défectueux.
Ce lecteur de disque compact est classié comme un produit laser de CATEGORIE 1,
la marque PRODUIT LASER DE CATEGORIE 1 est située sur le cabinet en dessous
de l'appareil.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid exposure
to beam.
This compact disc player is classied as a CLASS 1 LASER product. The CLASS 1
LASER PRODUCT marking is located on the bottom cabinet.
ADVERTÊNCIA: PARA PREVENIR O RISCO DE INCÊNDIO OU DE CHOQUE
ELÉCTRICO, NÃO EXPONHA ESTE APARELHO A CHUVA OU HUMIDADE.
ATENÇÃO: São emitidas radiações invisíveis quando os dispositivos de segurança são
abertos ou defeituosos.
Esse reprodutor de discos compactos é classicado como um produto de LASER DE
CLASSE 1. O indicador de PRODUTOS DE LASER DE CLASSE 1 pode ser encontrado
na parte inferior do invólucro do aparelho.
L'éclair avec le symbole de la èche dans le triangle est un signe d'alerte
avertissant l'utilisateur de "tension dangereuse" à l'intérieur de l'unité.
The lightning with the arrow symbol in the triangle is a warning sign alerting the
user to "dangerous voltage" inside the unit.
O símbolo do relâmpago com uma seta e situado no interior de um triângulo
destina-se a alertar o utilizador para a presença de uma “tensão perigosa” no
aparelho.
Le point d'exclamation dans le triangle est un signe d'alerte avertissant l'utilisateur
d'instructions importantes accompagnant le produit.
The exclamation point in the triangle is a warning sign alerting the user of
important instructions accompanying the product.
O ponto de exclamação no interior de um triângulo destina-se a alertar o utilizador
para a presença de instruções importantes no manual que acompanha o aparelho.
La marque d'avertissement est située en dessous de l'appareil.
The caution mark is located on bottom of the device.
O indicador de cuidado poderá ser encontrado na parte inferior do aparelho.
Si à l'avenir, vous deviez vous débarrasser de ce produit , sachez que les
produits électriques usagés ne doivent pas être jetés avec les ordures
ménagères. Des installations destinées au recyclage existent. Vériez auprès
de votre municipalité ou demandez à votre revendeur des conseils. (Directive
Déchets d'Equipements Electriques et Electroniques)
If in the future, you need to get rid of this product, please note that Waste
electrical products should not be disposed of with household waste. Recycling
facilities exist. Check with your municipality or ask your dealer for advice.
(Directive for Waste Electrical and Electronic Equipment)
Caso pretenda descartar-se deste aparelho, proceda à sua reciclagem num
centro de recolha para electrodomésticos. Procure obter informações sobre o
centro de reciclagem mais próximo. Informe-se junto das autoridades locais ou
do seu revendedor local para a obtenção de pormenores adicionais (Directiva
sobre os Resíduos dos Equipamentos Eléctricos e Electrónicos).
Nos emballages peuvent faire l’objet d’une consigne de tri, pour en savoir
plus: www.quefairedemesdechets.fr
IMPORTANT
- Utilisez cet appareil sous un climat tempéré.
- La plaque signalétique se trouve à l’arrière de cet appareil.
- Veiller à avoir une distance minimale de 5 cm autour de l'appareil pour une aération
sufsante et que la ventilation ne soit pas née en recouvrant les orices d'aération de
l'appareil avec des objets tels que journaux, nappes, rideaux…..
- Ne placez pas de sources de ammes nues, telles que des bougies allumées sur
l'appareil.
- Ne pas exposer l'appareil à des gouttes d'eau ou éclaboussures.
- Ne placez pas d'objets remplis de liquides, tels que verre, vase ou objets similaires
sur l'appareil.
- Ne pas jeter les piles dans le feu! Respectez l'environnement lors de la disposition des
piles usagées.
- Les piles ne doivent pas être exposées à une chaleur excessive comme le soleil, le feu
ou autre source de chaleur similaire.
- La che du cordon d'alimentation est utilisée comme dispositif de branchement et
doit rester facilement accessible. Pour être totalement déconnecté, cette che doit être
débranchée du réseau complètement. La prise de courant ne doit pas être obstruée et
doit être facilement accessible lors de son utilisation .
- Sous l'inuence du phénomène transitoire rapide et / ou phénomène électrostatique
électrique, le produit pourrait présenter des dysfonctionnements et l'utilisateur devra
faire une réinitialisation de l'appareil.
- Avant de jeter des piles, consultez votre revendeur car celui-ci peut les reprendre pour
les recycler.
IMPORTANT
- The use of apparatus in moderate climates.
- The Marking plate is located at the back of the device.
- Make sure to have a minimum distance of 5 cm around the unit for sufcient ventilation.
- Ensure that the ventilation openings is not covered with items such as newspapers,
tablecloths, curtains, etc.
- Do not place naked ame sources, such as lighted candles on the apparatus.
- Do not expose this appliance to dripping or splashing water.
- Do not place objects lled with liquids, such as glass, vase on the device.
- Do not throw batteries into re! Respect the environment when disposing of used
batteries.
- Batteries should not be exposed to excessive heat such as sunshine, re or other
similar heat source.
- The power plug is used as a disconnect device and must be easily accessible. To
be completely disconnected from the power, the plug of the appliance should be
disconnected completely. The socket must not be obstructed and should be easily
accessible during intended use.
- Under the inuence of fast transient and / or electrostatic electric phenomenon, the
product may malfunction and the user must perform a power reset of the device
- Before throwing any batteries away, consult your distributor who may be able to take
them back for specic recycling.
ATENÇÃO
- Utilize este aparelho num clima temperado.
- A placa de características situa-se na parte de trás deste aparelho.
- Certique-se de que respeita uma distância mínima de 5 cm à volta do aparelho de
modo a permitir uma ventilação suciente.
- Certique-se de que garante uma ventilação correcta do aparelho e que não tapa os
orifícios de ventilação com objectos como jornais, toalhas, cortinas, etc.
- Não coloque qualquer fonte de calor, como uma vela acesa, sobre ou na proximidade
do aparelho.
- Não exponha o aparelho a salpicos ou a humidade.
- Não coloque objectos que contenham líquido, como uma jarra, sobre ou na proximidade
do aparelho.
- Não deite as pilhas no fogo! Certique-se de que respeita o ambiente quando eliminar
pilhas gastas.
- Não exponha as pilhas a calor excessivo, como raios do sol, fogo ou outras fontes de
calor semelhantes.
- A cha de alimentação de rede permite desligar o aparelho e deve car facilmente
acessível. Para cortar a alimentação do aparelho, desligue de vez a cha de
alimentação de rede da tomada de rede. A cha de alimentação de rede não pode
estar tapada e deve ser facilmente acessível durante a utilização.
- Sob o efeito de fenómenos electrostáticos e/ou eléctricos transitórios, o produto
pode apresentar anomalias e pode acabar por ser necessário proceder-se a uma
reinicialização.
- Antes de eliminar as pilhas, consulte o seu distribuidor que poderá estar em condições
de as aceitar de volta para ns de reciclagem especíca.
Cet appareil fonctionne sur courant alternatif 230V AC 50 Hz ou avec 6 piles 1,5V de
type R14/ UM-2/ «C » (non fournies).
Alimentation secteur
Branchez le cordon d'alimentation détachable (inclus) à la prise secteur se trouvant à
l'arrière de l'appareil. Branchez le cordon d'alimentation sur une prise secteur murale.
FONCTIONNEMENT CC
Installez les piles dans leur compartiment. Utilisez uniquement la taille et le type de piles
spéciées. Respectez la polarité indiquée dans le compartiment. Une mauvaise Polarité
peut causer des dommages à l'appareil. Ne pas essayer de recharger les piles, elles
peuvent prendre feu ou exploser. Les piles doivent être remplacées lorsque: le volume
sonore diminue ou le son est déformé. An d'éviter tout risque de fuites des piles, retirez-
les si l'appareil n'est pas utilisé pendant une période prolongée.
ATTENTION: Risque d’explosion si les piles ne sont pas insérées correctement. Utilisez
uniquement des piles identiques ou de type équivalent.
Attention:
- Le cordon d'alimentation doit être débranché à la fois de l'appareil et de la prise secteur
pour que l'appareil fonctionne sur piles.
- Lorsque l’appareil est connecté au secteur, la source d'alimentation bascule
automatiquement en alimentation secteur.
- Dans un soucis d'économie d'énergie, lorsque la lecture est terminée ou arrêtez, l'unité
s'éteindra automatiquement après 10 minutes. Pour rénitialiser l'unité, positionnez
l'interrupteur de fonction sur la position OFF. Attendez quelques secondes et
positionnez sur ON de nouveau.
Dieses Gerät wird mit AC 230V 50Hz oder 6 x 1.5V Batterien der Größe R14/ UM-2/
„C“ (nicht mitgeliefert) betrieben.
AC-Betrieb
Verbinden Sie das abnehmbare AC-Kabel (mitgeliefert) mit der AC-Buchse hinten an der
Einheit. Stecken Sie das AC-Netzkabel in eine günstig liegende normale AC-Steckdose.
Gleichstrombetrieb
Legen Sie die Batterien in das Batteriefach ein. Verwenden Sie nur Batterien, die den
Vorgaben des Herstellers entsprechen. Bitte beachten Sie die Polarität beim Einlegen
der Batterien (siehe Batteriefach). Die Nicht-Beachtung der Polarität kann das Gerät
beschädigen. Versuchen Sie nicht, nicht-wiederauadbare Batterien wieder aufzuladen.
Sie könnten überhitzen und explodieren.
Batterien müssen ersetzt werden, wenn: Die Lautstärke nachlässt oder der Klang
während des Betriebs unklar wird. Um Auslaufen zu vermeiden, entfernen Sie die
Batterien, wenn die Einheit über eine längere Zeit nicht gebraucht werden soll.
ACHTUNG: Wenn die Batterien nicht richtig eingelegt sind, besteht Explosionsgefahr.
Verwenden Sie nur gleiche oder gleichwertige Batterietypen.
Vorsicht!
- Damit die Einheit mit Batterien betrieben werden kann, muss zuerst das AC-Kabel
sowohl aus der Buchse der Einheit als auch aus der Steckdose gezogen werden.
- Wenn das AC-Kabel der Haupteinheit mit der Steckdose verbunden ist, schaltet die
Stromquelle automatisch auf AC.
- Um Strom zu sparen, schaltet sich das Gerät automatisch nach 10 Minuten aus,
nachdem die Wiedergabe stoppt wird. Um das Gerät zurückzustellen, stellen Sie
den Funktionsschalter auf die Position OFF (Aus). Warten Sie einige Sekunden und
schalten Sie dann das Gerät wieder EIN.
This set operates on AC 230V 50Hz or 6 x 1.5V R14/ UM-2/ “C” size batteries (not
provided).
AC OPERATION
Connect the detachable AC cord (included) to the AC socket on the rear of the unit. Insert
the AC power cord into a convenient standard AC wall outlet.
DC OPERATION
Install the batteries in their compartment. Use only the size and type of batteries
specied.Respect the polarity indicated in the compartment. Improper polarity can cause
damage to the device. Do not attempt to recharge the batteries, they can catch re or
explode. The batteries need to be replaced when: The volume decreases, or sound is
distorted during operation. In order to avoid leakage, remove the batteries when unit will
not be used for a long period of time.
CAUTION: Danger of explosion if batteries are incorrectly replaced. Replace only with
the same or equivalent type.
Note:
- The AC cord must be unplugged from both the socket on the unit and the power outlet
for the unit to run on the batteries.
- When the set is connected to the mains, the power source automatically switches to AC.
- In a concern of saving energy, when playback has reached to the end or not playing,
the unit will automatically turn off after 10 minutes. To reset the unit, slide the Function
switch to OFF position. Wait a few seconds and then turn ON the unit again.
Este aparelho trabalha com AC 230V 50Hz ou 6 pilhas x 1,5V de tamanho R14/ UM-2/
“C” (não incluídas)
Funcionamento AC
Ligue o cabo AC (incluído) na tomada AC nas costas da unidade, ligue o cabo de
alimentação numa tomada AC padrão adequada.
Funcionamento DC
Instale as baterias em seu compartimento. Utilize apenas pilhas que respeitam as
recomendações do fabricante. Certique-se de que respeita a polaridade aquando
da colocação de pilhas (ver compartimento). A inobservância da polaridade pode
danicar o aparelho. Não tente recarregar pilhas não recarregáveis. Podem sofrer
um sobreaquecimento e explodir. As pilhas devem ser substituídas quando: O volume
diminuir, ou o som car distorcido durante o funcionamento. De forma a evitar fugas,
retire as pilhas se não usar o dispositivo durante um longo período.
ATENÇÃO: Riscos de explosão se as pilhas não forem inseridas correctamente. Utilize
apenas pilhas idênticas ou de tipo equivalente.
Nota:
- O cabo CA deve ser desligado tanto da tomada como do transformador para a unidade
poder funcionar com as baterias.
- Quando o cabo AC estiver ligado da unidade principal à tomada da parede, a
alimentação muda automaticamente para AC.
- No interesse de economizar energia, quando a reprodução chegar ao nal ou não
haja nenhuma reprodução, o aparelho se desligará automaticamente em 10 minutos.
Para reiniciar o aparelho, coloque o seletor de função na posição OFF (DESLIGADO).
Aguarde por alguns segundos e então LIGUE o aparelho novamente.
1. Coloque o Seletor de Funções na posição CD/AUX RADIO ou para ligar o aparelho.
O indicador LIGADO se acenderá.
2. Coloque o Seletor de Funções na posição OFF para desligar o aparelho. O indicador
LIGADO se apagará.
1. Coloque o Seletor de Funções na posição RADIO.
2. Utilize o comutador FM/ MW para escolher a banda pretendida.
3. Utilize, de seguida, o botão TUNING para regular a frequência pretendida.
4. Regule o nível sonoro com a ajuda do botão rotativo VOLUME.
Para melhorar a qualidade de recepção rádio:
FM: Estique a antena .
MW: Rode o aparelho horizontalmente para uma melhor recepção.
1. Slide the Function switch to RADIO position.
2. Slide the Band switch to select between FM and MW band.
3. Use the control to tune to your desired radio station.TUNING
4. Adjust the volume level.
To enhance radio reception ability:
FM: Extend the telescopic antenna.
MW: Rotate the unit horizontally for optimum reception.
1. Slide the Function switch to CD/AUX RADIO or position to turn on the unit. The ON
indicator will light up.
2. Slide the Function switch to position to turn off the unit. The ON indicator will OFF
turn off.
1. Positionnez l'interrupteur de fonction sur la position RADIO.
2. Utilisez le sélecteur de bande FM/MW pour sélectionner la bande de fréquences.
3. Utilisez ensuite le bouton de tuning pour atteindre la sta tion de votre choix.
4. Réglez le niveau sonore.
Pour améliorer la réception radio:
FM: déployez l’antenne FM
MW: pivotez l'appareil horizontalement pour une réception optimale.
1. Schieben Sie den Funktionsschalter in die RADIO-Position.
2. Verwenden Sie den MW/UKW-Schalter, um den gewünschten Frequenzbereich
auszuwählen.
3. Verwenden Sie anschließend den TUNING-Knopf, um die gewünschte Frequenz
einzustellen.
4. Stellen Sie die Lautstärke mit Hilfe des Drehrädchens Lautstärke ein.
Zur Verbesserung der Radioempfangsleistung:
UKW: Ziehen Sie den UKW-Antennendraht vollständig aus.
MW: Zur Erreichung eines optimalen Empfangs drehen Sie die Einheit horizontal.
1. Positionnez l'interrupteur de fonction sur la position CD/AUX RADIO ou pour allumer
l'unité. l'indicateur ON s'allumera.
2. Positionnez l'interrupteur de fonction sur la position OFF pour éteindre l'unité.
l'indicateur ON s'éteindra.
1. Schieben Sie den Funktionsschalter in die CD/AUX RADIO- oder -Position, um das
Gerät einzuschalten. Die Ein-Anzeige leuchtet daraufhin auf.
2. Schieben Sie den Funktionsschalter in die OFF-Position, um das Gerät auszuschalten.
Die EIN-Anzeige geht aus.
1. Slide the function switch to CD/AUX position. The ON indicator will light up.
2. Open the CD door. Insert a CD with label facing up and close the CD door. After a few
seconds, the total number of tracks will show on display.
3. Press to start playback. The current track number will show on display. The
indicator will light up.
PLAY/PAUSE
To temporarily stop playing, press button. The indicator will ash.
To resume play, press this button again.
STOP
If the button is pressed in the course of playing, the disc will cease to play. (Total
number of tracks will show on display).
SKIP AND SEARCH
You can always skip forward or backward to your desired track number by pressing the
SKIP ( / ) buttons. When playing any audio CD, press and hold the SKIP button.
The CD will search at high speed in the forward or backward direction. Normal play will
continue when you release the button.
REPEAT
To repeat the track currently playing, press the REP. button once. The repeat indicator
will ash.
To repeat all tracks, press the REP. button twice. The REPEAT indicator will light up and
stay lit.
To cancel the repeat function, press REP. button again. The repeat indictor will turn off.
PROGRAM
1. In stop mode, press button. “ “ will ash on display. PROG.
2. Press / to select a desired track and press button to conform. The PROG.
program indicator will ash in the course of programming.
3. Repeat above steps to program up to 20 tracks.
4. Press button to start program playback. The program indicator will light up and
stay lit.
5. To cancel program playback, press button twice. The program indicator will turn off.
If you encounter CD playback problem, either of the following ways may help:
1. Turn off the unit. Disconnect the AC power cord from AC outlet and reconnect it again.
2. Clean your CD disc.
1. Coloque o Seletor de Funções na posição CD/AUX. O indicador LIGADO se acenderá.
2. Abra o compartimento do CD. Insira um CD com a etiqueta voltada para cima e feche
o compartimento do CD. Depois de alguns segundos, o número total de faixas se
exibido na tela.
3. Pressione para iniciar a reprodução. O mero da faixa atual será exibido na tela.
O indicador se acenderá.
REPRODUZIR/PAUSAR
Para interromper temporariamente, pressione o botão . O indicador piscará.
Para restaurar a reprodução, pressione esse botão novamente.
PARAR
Caso o botão for pressionado durante uma reprodução, a reprodução do disco irá
parar. (o número total de faixas será exibido na tela).
PULAR E BUSCAR
Você sempre poderá avançar ou voltar para o número da faixa desejado ao pressionar os
botões PULAR ( / ). Quando estiver reproduzindo qualquer CD de áudio, mantenha
o botão PULAR pressionado. Uma busca em alta velocidade para frente ou para trás
será realizada no CD. A reprodução normal será restaurada quando você soltar o botão.
REPETIR
Para repetir a faixa que está sendo atualmente reproduzida, pressione o botão REP. uma
vez. O indicador Repetir piscará. Para repetir todas as faixas, pressione o botão REP.
duas vezes. O indicador REPETIR se acendee permanecerá aceso. Para cancelar
a função repetir, pressione o botão REP. novamente. O indicador repetir se desligará.
PROGRAMAR
1. Quando a reprodução estiver parada, prima o botão e “ “ piscará na tela. PROG.
2. Seleccione o cheiro pretendido com a ajuda dos botões / . Prima o botão PROG.
para conrmar. O indicador programar piscará enquanto vocês tiver programando.
3. Repita os passos acima para programar até 20 faixas.
4. Prima o botão para iniciar a reprodução programada. O indicador programar se
acenderá e permanecerá aceso.
5. Para cancelar a reprodução programada, pressione o botão duas vezes. O indicador
programar se desligará.
Caso você encontre problemas quando for tocar um CD, uma das seguintes soluções
poderá ajudá-lo:
1. Desligue o aparelho. Retire o o da tomada e conecte-o de volta.
2. Limpe o seu CD.
1. Positionnez l'interrupteur de fonction sur la position CD/AUX. L'indicateur ON s'allumera.
2. Ouvrez le clapet du CD. Insérez un CD avec l'étiquette orientée vers le haut et fermez
le clapet du CD, après quelques secondes, le nombre total de piste apparaitra sur
l'écran.
3. Appuyez sur pour démarrer la lecture. Le numéro de piste en cours s'afchera sur
l'écran. l'indicateur s'allumera.
LECTURE/PAUSE
Pour interrompre la lecture temporairement, appuyez sur la touche . L'indicateur
clignotera.
Pour reprendre la lecture, appuyez sur cette touche de nouveau.
ARRÊT
Si vous appuyez sur la touche pendant la lecture, le disque cessera d'être lu. (Le
nombre total de pistes s'afchera sur l'écran).
SAUT ET RECHERCHE
Vous pouvez toujours sauter une piste en avant ou en arrière pour atteindre le numéro
de piste de votre choix en appuyant sur les touches SAUT ( / ). Lorsque vous jouez
un CD audio, tnez la touche saut appuyée. Vous pouvez faire une recherche rapide
dans le CD dans la direction avant ou arrière. La lecture normale reprendra lorsque vous
relâcherez la touche.
RÉPÉTER
Pour répéter la piste en cours de lecture, appuyez sur la touche REP. une fois. L'indicateur
de répétition clignotera. Pour répéter toutes les pistes, appuyez sur la touche REP. deux
fois. L'indicateur RÉPÉTITION s'allumera et restera allumé. Pour annuler la fonction de
répétition, appuyez de nouveau sur la touche REP.. L'indicateur de répétition s'éteindra.
PROGRAMME
1. Lorsque la lecture est à l’arrêt, appuyez sur la touche « » clignotera sur PROG.
l'écran.
2. Sélectionnez le chier de votre choix à l’aide des touches / . Appuyez sur la
touche PROG. pour conrmer. L'indicateur de programme clignotera pendant le cours
de la programmation.
3. Répétez les étapes suivantes pour programmer jusqu'à 20 pistes.
4. Appuyez sur la touche pour commencer la lecture programmée. L'indicateur de
programmation s'allumera et restera éclairé.
5. Pour annuler la lecture programmée, appuyez deux fois sur la touche . L'indicateur
de programmation s'éteindra.
Si vous rencontrez un problème de lecture CD, l'une des deux solutions peut s'avérer
utile:
1. Éteignez l'unité. Déconnectez le cordon d'alimentation CA de la prise CA et
reconnectez-le de nouveau.
2. Nettoyez votre disque CD.
1. Slide the Function switch to position. Connect your auxiliary source (e. g. CD/AUX
mp3 player) to the AUX IN jack on the unit (cable not included). The unit will switch to
AUX mode automatically.
2. Start playback from your auxiliary source.
3. Adjust the volume to desired level.
4. To stop playback, disconnect your auxiliary source from the AUX IN jack.
Note: Once the audio cable is disconnected from the AUX IN jack, the unit will switch to
CD mode automatically.
1. Coloque o Seletor de Função na posão . Conecte a origem auxiliar (por CD/AUX
exemplo um tocador mp3) ao conector AUX IN no lado direito do aparelho (o não
acompanha). O aparelho mudará para o modo AUX automaticamente.
2. Arranque a reprodução na sua fonte auxiliar.
3. Ajuste o volume sonoro para o nível pretendido.
4. Para parar a reprodução, desligue a fonte áudio externa com ligação à tomada AUX IN.
Observação: Quando o o de áudio for desconectado da conexão de ENTRADA AUX, o
aparelho mudará para o modo de CD automaticamente.
1. Positionnez l'interrupteur de fonction sur la position . Connectez votre source CD/AUX
auxiliaire (par exemple lecteur MP3) sur la prise AUX IN sur le codroit de l’unité
(câble non inclus). L'unité passera automatiquement en mode AUX.
2. Commencez la lecture de votre source auxiliaire.
3. Réglez le volume au niveau souhaité.
4. Pour arrêter la lecture, débranchez votre source auxiliaire de la prise AUX IN.
Remarque: une fois que le câble audio est connecté de la prise AUX IN, l'unité passera
en mode CD automatiquement.
Cleaning
WARNING: Disconnect the unit from the mains supply before cleaning.
- Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
- Using solvents, abrasive or alcohol-based products risks damaging the appliance.
- If an object or liquid enters inside the appliance, unplug it immediately and have it
checked by an authorized engineer.
Notes on disc
* Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result
in malfunctions.
* Do not place more than one disc in the disc compartment.
* Do not try to open the disc compartment during playing.
* Do not touch the lens. Doing so may cause malfunction.
* If there is a scratch, dirt or ngerprints on the disc, it may cause tracking error. Before
playing, clean the disc with a cleaning cloth. Wipe the disc from the center out. Don't
store discs in places with high temperatures or high humidity, they can become warped.
After playing, store the disc in its case.
Important Note
• Before transporting the unit, remove the disc from the disc compartment.
Limpeza
ATENÇÃO: Desligue este aparelho de qualquer fonte de alimentação antes de proceder
à sua limpeza.
Utilize um pano macio, limpo e seco. Limpe regularmente os orifícios de ventilação na
parte de trás ou nos lados do aparelho para eliminar as partículas de pó.
A utilização de solventes ou de produtos abrasivos ou à base de álcool pode danicar
o aparelho.
Se um objecto ou líquido entrar no aparelho, desligue-o de imediato e solicite a sua
inspecção por um técnico autorizado.
Observações relativas aos discos
* Não utilize discos de forma irregular (exemplo: em forma de coração, octogonais). O
aparelho pode car avariado.
* Não coloque mais do que um disco no compartimento.
* Não tente abrir o compartimento do disco durante a reprodução.
* Não toque na lente dado que pode causar uma avaria no aparelho.
* Se o disco estiver riscado, sujo ou marcado com dedadas, o aparelho pode não
funcionar. Antes da reprodução, limpe o disco com um pano. Proceda do centro para
fora. Não arrume os discos em locais com temperaturas altas ou uma humidade
signicativa. Podem car deformados. Após a reprodução, volte a colocar os discos
nas respectivas caixas.
Observação importante
• Retire o disco do compartimento se o aparelho tiver de ser transportado.
Nettoyage
ATTENTION: Déconnectez cet appareil de toute source d’alimentation avant de le
nettoyer.
- Utilisez un chiffon doux, propre et sec. Dépoussiérez régulièrement les orices de
ventilation à l'arrière ou sur les côtés de l'appareil.
- L'utilisation de solvants ou de produits abrasifs ou à base d'alcool peut endommager
l'appareil.
- Si un objet ou un liquide entre dans l'appareil, débranchez immédiatement ce dernier et
faites-le contrôler par un ingénieur agréé.
Remarques sur les disques
* N’utilisez pas de disques de forme irrégulière (exemple : en forme de cœur, octogonaux).
L’appareil pourrait présenter des dysfonctionnements.
* Ne placez pas plusieurs disques dans le compartiment.
* N’essayez pas d’ouvrir le compartiment du disque pendant la lecture.
* Ne touchez pas la lentille. Vous pourriez provoquer un dysfonctionnement.
* Si le disque est rayé, sale ou maculé de traces de doigts, l’appareil peut ne pas
fonctionner. Avant la lecture, essuyez le disque avec un chiffon. Procédez du
centre vers l’extérieur. Ne rangez pas les disques dans des endroits présentant des
températures élevées ou une humidité importante. Ils pourraient se déformer. Après la
lecture, replacez vos disques dans leur boîtier.
Remarque importante
Retirez le disque du compartiment si l’appareil doit être transporté.
POWER SUPPLY: AC 230V 50Hz, 14W consumption
DC 9V 6x1.5V, battery type R14/UM-2/ “C” size (not provided)
RADIO SECTION:
FM 88-108 MHz
MW 540-1600 kHz
CD PLAYER SECTION:
FREQUENCY RESPONE: 100Hz -20kHz
SIGNAL- TO – NOISE RATIO: 40dB
AUX IN SECTION: 3.5mm AUX jack
Note: Design and specication are subject to change without notice.
INFORMAÇÕES DA ENTRADA AUXILIAR: Conexão AUX de 3,5mm
Nota: O desenho e as especicações estão sujeitas a mudanças sem aviso prévio.
Alimentação: AC 230V 50Hz, consumo 14W
6x1,5V, bateria do modelo R14/UM- 2/”C” (não inclusa)
Rádio:
FM 88-108MHz
MW 540-1600kHz
INFORMAÇÕES DO REPRODUTOR DE CD:
FREQUÊNCIA DE RESPOSTA: 100Hz -20kHz
PROPORÇÃO DE SINAL-PARA-RUÍDO: 40dB
ALIMENTATION: Secteur: 230V 50Hz, consommation: 14W
Courant continu: 6x1.5V, type R14/UM-2/”C” (non fournies)
RADIO:
FM 88-108 MHz
MW 540-1600 kHz
SECTION LECTEUR CD:
REPONSE EN FREQUENCE: 100Hz -20kHz
RAPPORT SIGNAL SUR BRUIT: 40dB
SECTION ENTREE AUXILIAIRE: Prise auxilaire 3,5mm AUX
Remarque: les caractéristiques et les spécications sont sujettes à modication sans
préavis.
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France
EMPLACEMENT ET DESCRIPTION DES COMMANDES
BESCHREIBUNG DES GERÄTES
LOCATION AND DESCRIPTION OF CONTROLS
DESCRIÇÃO DO APARELHO
RADIO PORTABLE LECTEUR CD
TRAGBARER RADIO-CD-PLAYER
PORTABLE RADIO CD PLAYER
TOCADOR DE RÁDIO E CD PORTÁTILFR
DE
GB
PT
1. LED display
2. indicatorON
3. Program indicator (PROG.)
4. Repeat indicator (REP.)
5. Play / Pause indicator
6. Speakers
7. SKIP button
8. SKIP button
9. PLAY / PAUSE button
10. STOP button
11. PROGRAM button (PROG. )
12. REPEAT button (REP.)
1. Tela
2. Indicador LIGADO (ON)
3. Indicador de Programação (PROG.)
4. Indicador Repetir (REP.)
5. Indicador Reproduzir/Pausar
6. Altifalantes
7. Botão
8. Botão
9. Botão (Leitura/Pausa)
10. Botão (Parar)
11. Botão (programação)PROG.
12. Botão REP. (Repetição)
1. Afchage LED
2. Indicateur ON
3. Indicateur de programme (PROG.)
4. Indicateur de répétition (REP.)
5. Indicateur (lecture / pause)
6. Haut-parleurs
7. Touche (saut)
8. Touche (saut)
9. Touche (lecture / pause)
10. Touche (Arrêt)
11. Touche (programmation)PROG.
12. Touche REP. (répétition)
13. Compartiment disque
1. LED Anzeige
2. EIN-Anzeige (ON)
3. Programmanzeige (PROG.)
4. Wiederholungsanzeige (REP.)
5. Wiedergabe/Pause-Anzeige
6. Lautsprecher
7. Taste
8. Taste
9. Taste ( Wiedergabe und Pause)
10. Taste
11. Taste (Programmierung)PROG.
12. Taste REP. (Wiederholung)
Lire attentivement les instructions avant de faire
fonctionner l’appareil.
Read the instructions carefully before operating the
unit.
Leia este manual com atenção antes de qualquer
utilização.
Bitte lesen sie dieses handbuch vor dem gebrauch des
gerätes sorgfältig durch.
Antes de utilizar este aparato, lea atentamente las
siguientes instrucciones.
Leggere attentamente questo manuale prima di
utilizzare l’apparecchio.
Lees deze handleiding aandachtig voor u het toestel
gebruikt.
FR
GB
PT
DE
ES
IT
NL
FR Manuel de l’utilisateur
GB User Manual
PT Manual do Utilizador
Benutzerhandbuch
DE
ES Manual de instrucciones
Manuale di istruzioni
IT
NL Handleiding MD-205 UK / NY / LD
13. CD compartment
14. Carrying handle
15. FM telescopic antenna
16. AUX IN jack
17. Function selector ( CD/AUX, RADIO,
Unit ON/OFF)
18. VOLUME control
19. TUNING knob with dial scale
20. Dial pointer
21. Band selector (FM/MW)
22. Battery compartment
23. AC socket ( ) AC IN
13. Compartimento para disco
14. Pega
15. Antena telescópica FM
16. Tomada de entrada Aux (AUX IN)
17. Seletor de funções (CD/AUX,
RÁDIO, LIGAR/DESLIGAR aparelho)
18. Botão rotativo VOLUME
19. SINTONIZADOR com marcações
(TUNING)
20. Ponteiro de frequência
21. Seleccionador de bandas (FM/MW)
22. Compartimento para pilha
23. Tomada AC ( )AC IN
14. Poignée de transport
15. Antenne télescopique FM
16. Entrée auxiliaire (AUX IN)
17. Sélecteur de fonction ( CD/AUX, RADIO,
Unité M/A)
18. Bouton de VOLUME
19. Molette TUNING (syntonisation) avec
cadran de fréquence
20. Aiguille
21. Sélecteur de bande (FM/MW)
22. Compartiment à piles
23. Prise secteur ( )AC IN
13. Disk-Fach
14. Traggriff
15. FM-Teleskopantenne
16. AUX-Eingang (AUX IN )
17. Funktionsauswahl ( CD/AUX, RADIO,
EIN/AUS)
18. Knopf VOLUME
19. Frequenzdrehknopf mit Frequenzskala
20. Skalenzeiger
21. Frequenzbandwähler (FM/MW)
22. Batterie-Fach
23. AC-Buchse ( ) AC IN
CDs ABSPIELEN
1. Schieben Sie den Funktionsschalter in die CD/AUX-Position. Die Ein-Anzeige leuchtet
daraufhin auf.
2. Öffnen Sie das CD-Ladefach. Legen Sie eine CD mit der beschrifteten Seite nach oben
in das Ladefach und schließen Sie es. Nach ein paar Sekunden wird die Gesamtzahl
der Titel in der Anzeige angezeigt.
3. Betätigen Sie zum Starten der Wiedergabe. Die Titelnummer wird dann in der
Anzeige angezeigt. Die Anzeige leuchtet auf.
WIEDERGABE / PAUSE
Um die Wiedergabe vorübergehend zu unterbrechen, betätigen Sie die Taste . Die
Anzeige fängt an zu blinken.
Zum Fortfahren der Wiedergabe betätigen Sie diese Taste bitte erneut.
RD-3699 IB MUSE 001 REV0.indd 1 2015/8/10 10:07:51
IMPORTANT SAFETY INSTRUCTION
ACHTUNG: Um Elektroschockgefahr zu vermeiden, dürfen Sie
dieses Gerät nicht demontieren. Das Gerät enthält keine Teile,
die der Benutzer selbst reparieren kann. Vertrauen Sie die
Instandhaltung des Geräts einem Fachmann an.
WARNUNG: UM BRAND- UND ELEKTROSCHOCKGEFAHR VORZUBEUGEN,
DÜRFEN SIE DIESES GERÄT WEDER REGEN NOCH FEUCHTIGKEIT AUSSETZEN.
ACHTUNG: Beim Umgehen der Sicherheitsvorrichtungen oder wenn diese defekt sind,
kann aus dem Gerät unsichtbare Laserstrahlung austreten.
Dieser CD-Player wurde als Klasse I Laserprodukt eingestuft. Der Hinweis KLASSE 1
LASER PRODUKT bendet sich auf der Unterseite des Gehäuses.
Das in einem Pfeil endende Blitzsymbol innerhalb eines Dreiecks weist den
Benutzer auf die Gegenwart einer „gefährlichen Spannung“ im Gerät hin.
Das Ausrufezeichen im Inneren eines Dreiecks weist den Benutzer auf wichtige
Anweisungen hin, die sich in dem das Gerät begleitenden Handbuch benden.
Das Warnsymbol bendet sich auf der Unterseite des Geräts.
Wenn Sie dieses Gerät entsorgen möchten, denken Sie daran, es bei einer
Sammelstelle für elektrische Haushaltsgeräte zu entsorgen. Erkundigen
Sie sich nach Ihrer nächstgelegenen Wertstoffsammelstelle. Für detaillierte
Informationen wenden Sie sich an die örtlichen Behörden oder an Ihren
Händler. (Richtlinie über elektrische und elektronische Abfallgeräte).
ACHTUNG
- Verwenden Sie dieses Gerät in klimatisch gemäßigter Umgebung.
- Das Typenschild bendet sich auf der Rückseite des Geräts.
- Achten Sie auf einen Mindestabstand von 5 cm zu Ihrem Gerät, um eine ausreichende
Belüftung zu gewährleisten.
- Stellen Sie eine ausreichende Belüftung des Geräts sicher und behindern Sie die
Belüftungsöffnungen nicht mit Gegenständen wie z. B. Zeitungen, Tischdecken,
Vorhängen, usw.
- Stellen Sie keine Wärmequelle wie eine angezündete Kerze auf oder in der Nähe des
Geräts ab.
- Setzen Sie das Gerät niemals Wasserspritzern oder Feuchtigkeit aus.
- Stellen Sie kein mit Wasser gefülltes Gefäß, wie z. B. Vasen, in der Nähe des Geräts ab.
- Werfen Sie Batterien nicht ins Feuer! Entsorgen Sie leere Batterien umweltgerecht.
- Batterien dürfen keiner übermäßigen Hitze ausgesetzt werden (wie zum Beispiel praller
Sonne, Feuer oder anderen ähnlichen Hitzequellen).
- Mit dem Netzstecker kann das Gerät vom Netz getrennt werden, er muss daher leicht
zugänglich sein. Um das Gerät vollständig vom Netz zu trennen, trennen Sie den
Netzstecker komplett von der Netzsteckdose. Der Netzstecker darf nicht behindert
werden und muss während der Verwendung leicht zugänglich sein.
- Unter der Einwirkung von elektrostatischen und/oder elektrischen Phänomen kann das
Produkt Fehlfunktionen aufweisen. Ein Zurücksetzen auf die Werkseinstellungen kann
sich als notwendig erweisen.
- Aufgebrauchte Batterien bitte nicht wegwerfen, sondern fragen Sie bei Ihrem Händler
nach ob dieser möglicherweise Batterien zum speziellen Wiederverwerten (Recycling)
entgegen nimmt und sammelt.
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France
FUENTE DE ALIMENTACIÓN
ALIMENTAZIONE
STROOMTOEVOER
ENCNEDIDO/APAGADO DE LA UNIDAD
ATTIVARE E DISATTIVARE L’APPARECCHIO
HET APPARAAT IN-/UITSCHAKELEN
FUNCIONAMIENTO DE LA RADIO
ASCOLTO DELLA RADIO
NAAR DE RADIO LUISTEREN
Este aparato funciona con CA 230V 50Hz o pilas 6 X 1.5V tipo R14/ UM-2/ tamaño
"C" (no incluidas).
Funcionamiento CA (corriente alterna)
Conecte el cable de CA (incluido) a la entrada CA de detrás del aparato. Conecte el cable
CA a la toma de corriente de la pared.
Funcionamiento DC
Introduzca la pila en el compartimento de la pila. Utilice únicamente pilas que cumplan
las recomendaciones del fabricante. Respete la polaridad al colocar las pilas (véase
el interior del compartimento de las pilas). Si no lo hace, podría estropear el aparato.
No intente recargar las pilas no recargables. Podrían sobrecalentarse y explotar.
Las baterías se tienen que sustituir cuando: el volumen disminuye, o el sonido está
distorsionado durante el funcionamiento. Con el n de evitar cualquier tipo de derrame
de líquido, extraiga las baterías cuando no vaya a utilizar el aparato durante un largo
periodo de tiempo.
ATENCIÓN: Riesgo de explosión si las pilas no se introducen correctamente. Cambie las
pilas únicamente por otras del mismo tipo o uno equivalente.
¡Precaución!
- Para que el dispositivo funcione con baterías, el cable CA debe estar desenchufado
tanto del enchufe del dispositivo como de la toma de corriente.
- Cuando el aparato está conectado a la red eléctrica, la fuente de alimentación cambia
automáticamente a CA.
- Con el objetivo de ahorrar energía, cuando la reproducción haya alcanzado el nal
o no se esté reproduciendo, la unidad se apagará automáticamente transcurridos 10
minutos. Para resetear la unidad, deslice el interruptor de Función hasta la posición
OFF. Espere unos segundos y luego encienda de nuevo la unidad.
Questo apparecchio è alimentato da un alimentatore CA 230V 50Hz o 6 batterie x
1.5V R14/ UM-2/ ”C” (non forniti).
Alimentazione con CA
Collegare il cavetto del CA (fornito) alla presa CA sulla parte posteriore dell’apparecchio.
Inserire il cavetto di alimentazione CA in una presa da parete CA standard.
Alimentazione con CC
Inserire le batterie nel relativo vano.Utilizzate soltanto pile che corrispondono alle
indicazioni del fabbricante. Rispettate la polarità durante l’inserimento delle pile (vedi
illustrazione nel comparto). Non rispettare la polarità può arrecare danni all’apparecchio.
Non cercate di ricaricare pile non ricaricabili. Potrebbero surriscaldarsi ed esplodere. Le
batterie devono essere sostituite quando: il volume diminuisce, o il suono risulta distorto
durante l’uso. Per evitare perdite di acido, rimuovere le batterie se l’unita non viene
utilizzata per un periodo prolungato.
ATTENZIONE: Rischio di esplosione se le pile non sono inserite correttamente. Utilizzate
solamente pile identiche o equivalenti.
Nota:
- Il cavo di alimentazione deve essere staccato sia dalla presa dell'apparecchio, che dalla
presa di corrente, per far operare l'apparecchio con batterie.
- Quando l’apparecchio è collegato con la presa da parete mediante il cavetto CA,
l’alimentazione passa automaticamente a CA.
- Per risparmiare energia, al termine della riproduzione o quando accesa ma non in
uso, l'unità si spegne in automatico dopo 10 minuti. Per resettare l'unità, scorrere
l'interruttore di funzione in posizione OFF. Attendere alcuni secondi, quindi riaccendere
l'unità.
1. Deslice el interruptor de función hasta la posición CD/AUX RADIO o para encender la
unidad. El indicador de Encendido se iluminará.
2. Deslice el interruptor de función hasta la posición para apagar la unidad. El OFF
indicador de Encendido se apagará.
1. Per accendere l'unità, scorrere l'interruttore di funzione in posizione CD/AUX o
RADIO. La spia di accensione si illumina.
2. Per spegnere l'unità, scorrere l'interruttore di funzione in posizione OFF. La spia di
accensione si spegne.
1. Schuif de functieschakelaar naar de stand CD/AUX RADIO of om het apparaat in te
schakelen. De AAN-indicator licht op.
2. Schuif de functieschakelaar naar de stand om het apparaat uit te schakelen. De OFF
AAN-indicator is nu niet langer opgelicht.
1. Deslice el interruptor de función hasta la posición RADIO.
2. Utilice el selector de banda (FM/MW) para seleccionar la banda.
3. Utilice el mando TUNING para sintonizar la emisora de radio que desee.
4. Regule el nivel del volumen.
Para mejorar la capacidad de recepción de la radio:
FM: Alargar la antena.
MW: Girar el aparato horizontalmente para una recepción óptima.
1. Scorrete l'interruttore di funzione in posizione RADIO.
2. Utilizzare il selettore per selezionare la banda desiderata.FM /MW
3. Servitevi quindi della manopola TUNING per impostare la frequenza desiderata.
4. Regolate il volume con la manopola volume.
Per migliorare la ricezione:
FM: Estendere l’antenna.
MW: Ruotare l’apparecchio orizzontalmente per ottenere la ricezione migliore.
1. Schuif de functieschakelaar naar de stand RADIO.
2. Kies de MW of FM-band met behulp van de schakelaar FM /MW.
3. Gebruik de TUNING-knop om de radio op de gewenste frequentie af te stemmen.
4. Regel het volume met behulp van de VOLUME-knop.
Om de ontvangst van de radio te optimaliseren:
FM: Strek de FM-draadantenne volledig uit.
MW: Draai het apparaat in horizontale richting.
LOCATION AND DESCRIPTION OF CONTROLS
DESCRIZIONE DEL PRODOTTO
BESCHRIJVING VAN HET TOESTEL
REPRODUCTOR DE CD PORTÁTIL CON RADIO
RADIO PORTATILE CON LETTORE CD
DRAAGBARE RADIO/CD-SPELER
ES
IT
NL
1. Display LED
2. Indicador de Encendido (ON)
3. Indicador de programación (PROG.)
4. Indicador de repetición (REP.)
5. Indicador de Reproducción/ Pausa
6. Altavoces
7. Botón
8. Botón
9. Botón (Reproducción/Pausa)
10. Botón (Parada)
11. Botón (programada)PROG.
12. Botón REP. (Repetir)
1. Display LED
2. Spia di accensione (ON)
3. Indicatore riproduzione programmata
(PROG.)
4. Indicatore riproduzione ripetuta (REP.)
5. Indicatore riproduci/sospendi
6. Altoparlanti
7. Tasto (salto)
8. Tasto (salto)
9. Tasto (riproduzione/pausa)
10. Tasto (stop )
11. Tasto (programmazione)PROG.
12. Tasto REP. (ripeti)
1. LED-display
2. AAN-indicator (ON)
3. Programma-indicator (PROG.)
4. Herhaalindicator (REP.)
5. Afspeel/pauze-indicator
6. Luidsprekers
7. Toets (doorspoelen)
8. Toets (doorspoelen)
9. Toets (spelen / pauze)
10. Toets ( stop)
11. Toets ( programmering )PROG.
12. Toets REP. (herhaling)
13. Compartimento del disco
14. Asa de transporte
15. Antena telescópica FM
16. Entrada auxiliar (AUX IN)
17. Selector de función ( CD/AUX,
RADIO, Unidad Encendida/Apagada)
18. Botón giratorio (volumen)VOLUME
19. Control TUNING con escala dial
20. Puntero de dial
21. Selector de Banda (FM/MW )
22. Compartimento para la pila
23. Entrada CA ( )AC IN
13. Compartimento disco
14. Maniglia
15. Antenna telescopica FM
16. Ingresso ausiliario (AUX IN)
17. Interruttore di funzione ( CD/AUX,
RADIO, unità ON/OFF)
18. Manopola VOLUME
19. Manopola di SINTONIZZAZIONE con
scala graduata
20. Lancetta
21. Selettore Band (FM/MW)
22. Vano batterie
23. Presa AC ( ) AC IN
13. Diskcompartiment
14. Draagbeugel
15. Telescopische FM-antenne
16. AUX IN-stekkerbus
17. Functieschakelaar ( CD/AUX,
RADIO, Apparaat AAN/UIT)
18. VOLUME-draaiknop
19. Afstemknop met afstemschaal
20. Schaalwijzer
21. Golfbereikschakelaar (FM/MW)
22. Batterijcompartiment
23. AC-aansluiting ( )AC IN
PARA ESCUCHAR UN CD
ASCOLTO DI UN CD
NAAR EEN CD LUISTEREN
CONEXIÓN DE UN DISPOSITIVO EXTERNO
COLLEGAMENTO SORGENTE AUSILIARIA
GEBRUIK VAN DE HULPINGANG
MANTENIMIENTO
MANUTENZIONE
ONDERHOUD
FICHA TÉCNICA
SPECIFICHE
TECHNISCHE KENMERKEN
IMPORTANTES INSTRUCCIONES DE SEGURIDAD
ISTRUZIONI DI SICUREZZA IMPORTANTI
BELANGRIJKE VEILIGHEIDSINSTRUCTIES
ATENCIÓN: Para reducir el riesgo de descarga eléctrica, no
desmonte el aparato. En el interior de este aparato no existe
ninguna pieza que pueda ser reparada por el usuario. Para
cualquier operación de mantenimiento y reparación, póngase en
contacto con personal técnico cualicado.
ATTENZIONE: Per ridurre il rischio di scossa elettrica, non
smontate l’apparecchio. Questo apparecchio non contiene
pezzi riparabili dall’utente. Per ogni riparazione rivolgetevi
esclusivamente a tecnici qualicati.
OPGEPAST: Om het risico op elektrische schokken te vermijden,
mag u het toestel niet demonteren. Het toestel bevat geen enkel
onderdeel dat door de gebruiker zelf kan gerepareerd worden.
Contacteer altijd een gekwaliceerde technieker indien een
reparatie nodig is.
ADVERTENCIA: PARA PREVENIR EL RIESGO DE INCENDIO O DE DESCARGA
ELÉCTRICA, NO EXPONGA ESTE APARATO A LA LLUVIA O A LA HUMEDAD.
ATENCIÓN: Radiación láser invisible en caso de apertura o fallo de los cierres de
seguridad.
Este reproductor de discos compactos ha sido clasicado como producto LÁSER DE
CLASE 1. La marca de PRODUCTO SER DE CLASE 1 se encuentra en la parte
inferior del exterior del dispositivo.
AVVERTENZA: PER EVITARE IL RISCHIO DI INCENDIO O SCOSSA ELETTRICA,
NON ESPONETE L’APPARECCHIO ALLA PIOGGIA O ALL’UMIDITÀ.
ATTENZIONE: Emissione di radiazioni laser invisibili quando i dispositivi di sicurezza
sono aperti o difettosi.
Questo lettore CD è un prodotto a laser di classe 1. Il simbolo indicante PRODOTTO A
LASER DI CLASSE 1 è posto sul fomdo del compartimento disco.
WAARSCHUWING Stel het toestel niet bloot aan vocht of regen om het risico op
brand of elektrische schokken te vermijden.
OPGEPAST: ONZICHTBARE LASERSTRALEN WANNEER HET VEILIGHEIDSME-
CHANISME OPEN OF STUK IS. Deze cd-speler is geclassiceerd als een KLASSE
1 LASERPRODUCT. De KLASSE 1 LASERPRODUCT-markering bevindt zich op de
onderkant van de behuizing.
El símbolo del rayo con una echa dentro de un triángulo equilátero advierte al
usuario de la presencia de voltaje peligroso en el interior del aparato.
Il simbolo del fulmine con una freccia all’estremità all’interno di un triangolo
equilatero avverte l’utente della presenza di una “tensione pericolosa”
nell’apparecchio.
Het symbool van een zwarte driehoek met daarin een witte bliksemschicht
eindigend in een driehoek, waarschuwt de gebruiker dat er een gevaarlijke
spanning aanwezig is in het toestel
El signo de exclamación dentro de un triángulo equilátero advierte al usuario de
la presencia de importantes instrucciones de funcionamiento y mantenimiento en
el manual que acompaña al producto.
Il punto esclamativo inscritto nel triangolo equilatero indica all'utente che nel
manuale di istruzioni si trovano importanti avvertenze per l'uso e la manutenzione
dell'apparecchio.
Het bovenstaande symbool (zwarte driehoek met daarin een wit uitroepingsteken)
waarschuwt de gebruiker dat er belangrijke gebruiksaanwijzingen in verband met het
gebruik en het onderhoud ter beschikking zijn in de bijgeleverde handleiding.
El símbolo de precaución se encuentra en la parte inferior del dispositivo.
ll simbolo è posto sul fondo dell'unità.
De waarschuwingsmarkering bevindt zich op de onderkant van het apparaat.
Si desea deshacerse de este aparato, recuerde que ha de depositarlo en un
lugar destinado al reciclado de electrodomésticos. Infórmese acerca del centro
de reciclaje más cercano. Consulte a las autoridades locales o a su proveedor
para obtener más información al respecto. (Directiva de Residuos de Aparatos
Eléctricos y Electrónicos)
Se in futuro volete sbarazzarvi di questo apparecchio, ricordate che le
apparecchiature elettroniche non devono essere gettate insieme ai riuti
domestici. Informatevi per sapere dove si trova il centro di riciclaggio più
vicino. Per ulteriori dettagli, rivolgetevi alle autorità locali o al vostro rivenditore.
(Direttiva sui riuti delle apparecchiature elettriche ed elettroniche).
Indien u dit toestel in de toekomst wilt weggooien, denk er dan aan om het te
recycleren via een inzamelpunt voor elektrische huishoudapparaten. Informeer
naar het dichtstbijzijnde recyclagecentrum. Voor meer informatie wendt u
zich tot de lokale overheden of uw verdeler (richtlijn met betrekking tot Afval
afkomstig van elektrische en elektronische apparaten).
ATENCIÓN
- Utilice este aparato en lugares con climas templados.
- La placa de datos técnicos está situada en la parte posterior del dispositivo.
- Deje libre alrededor del aparato una distancia mínima de 5 cm para garantizar una
correcta ventilación del mismo.
- Para asegurar una ventilación correcta del aparato, no cubra los oricios de ventilación
con objetos tales como periódicos, manteles, cortinas, etc.
- No coloque ninguna fuente de calor, como por ejemplo una vela encendida, sobre el
aparato o cerca de él.
- No exponga el aparato a salpicaduras o a la humedad.
- No coloque objetos que contengan líquido, como un jarrón, encima del aparato.
- No tire las pilas al fuego. Respete el medio ambiente cuando se deshaga de las pilas
usadas.
- No exponga las pilas a temperaturas demasiado altas, como las producidas por la
exposición directa a los rayos del sol, al fuego o a otras fuentes de calor.
- El acceso al enchufe ha de permanecer despejado. Para cortar por completo la
alimentación del aparato, desenchúfelo de la toma de corriente. Se ha de poder
acceder fácilmente al enchufe durante el uso del aparato; procure que el acceso al
mismo esté despejado.
- Como resultado de fenómenos electroestáticos y/o eléctricos transitorios, pueden
producirse fallos en el funcionamiento del producto. En estos casos, el usuario deberá
reiniciar el aparato desenchufándolo y volviéndolo a enchufar.
- Antes de tirar las pilas, consulte a su proveedor: puede entregárselas para reciclarlas.
ATTENZIONE
- Utilizzate l’apparecchio in ambienti temperati.
- La targhetta segnaletica si trova nella parte posteriore dell'apparecchio.
- Lasciate uno spazio minimo di 5 cm intorno all’apparecchio per permettere una
ventilazione sufciente.
- Garantite sempre una ventilazione corretta dell’apparecchio e non coprite le aperture di
ventilazione con oggetti come giornali, tovaglie, tende, ecc.
- Non collocate nessuna fonte di calore, come una candela accesa, sopra o nei pressi
dell’apparecchio.
- Non esponete l’apparecchio all'acqua o all’umidità.
- Non collocate nessun recipiente contenente liquidi, come ad esempio un vaso, nelle
vicinanze dell’apparecchio.
- Non gettate le pile nel fuoco! Abbiate cura di rispettare l’ambiente quando gettate le pile.
- Non esponete le pile ad un calore eccessivo, come raggi solari, fuoco o fonti di calore
analoghe.
- La presa di alimentazione permette di scollegare l’apparecchio dalla corrente elettrica
e deve quindi restare facilmente accessibile. Per interrompere completamente
l’alimentazione dell’apparecchio, scollegate la spina di alimentazione dalla presa di
corrente. La presa di alimentazione deve restare facilmente accessibile durante l’uso,
accertatevi che l’accesso alla presa sia libero.
- Per effetto di fenomeni transitori elettrostatici e/o elettrici, è possibile che il prodotto non
funzioni correttamente. In tal caso è opportuno reinizializzarel’apparecchio.
- Prima di gettare le pile, rivolgetevi al vostro rivenditore, qualora provveda al riciclaggio
delle pile usate.
OPGELET
- Gebruik dit toestel bij een gematigd klimaat.
- Het kenmerkenplaatje bevindt zich aan de achterkant van het toestel.
- Zorg voor een afstand van minimum 5 cm rondom uw toestel voor voldoende ventilatie.
- Zorg voor een juiste ventilatie van het toestel en bedek de ventilatie-openingen niet met
voorwerpen zoals dagbladen, tafellakens, gordijnen, enz.
- Plaats geen warmtebron, zoals een brandende kaars, op of in de buurt van het toestel.
- Stel het toestel niet bloot aan waterspatten of vochtigheid.
- Plaats geen voorwerpen met vloeistof, zoals een vaas, op of in de buurt van het toestel.
- Gooi de batterijen niet in het vuur. Respecteer het milieu als u gebruikte batterijen
wegwerpt.
- Stel de batterijen niet bloot aan overdreven hitte zoals zonnestralen, vuur of gelijkaardige
warmtebronnen.
- Met de netspanningsstekker kan het toestel uitgetrokken worden, deze moet
dus gemakkelijk toegankelijk blijven. Om de voeding van het toestel volledig te
onderbreken dient u de voedingsstekker helemaal uit het stopcontact te trekken. De
netspanningsstekker mag niet verhinderd worden en moet gemakkelijk toegankelijk zijn
tijdens gebruik.
- Onder invloed van tijdelijke elektrostatische en/of elektrische verschijnselen kan het
product storingen ondervinden en kan een heropstart nodig blijken.
- Voor u batterijen wegwerpt, raadpleegt u eerst uw verdeler die wellicht batterijen
terugneemt voor specieke recyclage.
1. Deslice el interruptor de función hasta la posición CD/AUX. El indicador de Encendido
se iluminará.
2. Abra la tapa de alojamiento del CD. Introduzca un CD con la cara impresa mirando
hacia arriba y cierre la tapa. Pasados unos segundos, el mero total de pistas se
mostrará en el display.
3. Pulse el botón para iniciar la reproducción. El número de pista en curso se mostrará
en el display. El indicador se iluminará.
REPRODUCCIÓN/PAUSA
Para detener la reproducción temporalmente, pulse el botón . El indicador
parpadeará.
Pra reanudar la reproducción, pulse de nuevo este botón.
DETENCIÓN
Si se pulsa el botón durante la reproducción, el disco dejará de reproducir. (El número
total de pistas se mostrará en el display).
SALTO Y BÚSQUEDA
Podrá saltar hacia delante o hacia atrás hasta el número de pista que desee pulsando los
botones de SALTO ( ). Cuando reproduzca un CD de audio, mantenga pulsado el /
botón de SALTO ( / ). El CD buscará a alta velocidad hacia delante o hacia atrás.
La reproducción normal se reanudará cuando deje de pulsar el botón.
REPETICIÓN
Para repetir la pista en reproducción, pulse una vez el botón REP. El indicador de
repetición parpadeará. Para repetir todas las pistas, pulse el botón REP. dos veces. El
indicador de repetición se iluminará permaneciendo después encendido. Para cancelar
la función de repetición, pulse de nuevo el botón REP. El indicador de repetición se
apagará.
PROGRAMACIÓN
1. En modo de parada, pulse el botón “ parpadeará en el display. PROG.
2. Utilice los botones para seleccionar el archivo que desee. Pulse el botón /
PROG. para conrmar. El indicador de programación parpadeara durante el proceso
de programación.
3. Repita los pasos apenas descritos para programar hasta 20 pistas.
4. Pulse el botón para iniciar la reproducción programada. El indicador de programación
se iluminará permaneciendo después encendido.
5. Para cancelar la reproducción programada, pulse el botón dos veces. El indicador
de programación se apagará.
Si tuviera problemas con la reproducción del CD, cualquiera de los siguientes
procedimientos podría ayudarle:
1. Apague la unidad. Desconecte el cable de alimentación de la toma de corriente y
después vuelva a conectarlo.
2. Limpie el CD.
1. Scorrete l'interruttore di funzione in posizione . La spia di accensione/CD/AUX
spegnimento si illumina.
2. Sollevate lo sportello del compartimento disco. Inserite un CD con il lato stampato
rivolto verso l'alto. Richiudete lo sportello. Dopo alcuni secondi sul display viene
visualizzato il numero totale delle tracce.
3. Premete il tasto per avviare la riproduzione. Sul display viene visualizzato il numero
della traccia corrente. L'indicatore si illumina.
RIPRODUZIONE/SOSPENSIONE
Per sospendere temporaneamente la riproduzione, premete il tasto . L'indicatore
si illumina.
Per riprendere la riproduzione, premete di nuovo il tasto .
ARRESTO
Premendo il tasto durante la riproduzione, la riproduzione viene arrestata (sul display
viene visualizzato il numero totale delle tracce).
AVANZAMENTO, RIAVVOLGIMENTO E RICERCA
L'unità consente di avanzare a una traccia successiva o tornare a una precedente in
qualsiasi momento utilizzando i tasti / . Durante la riproduzione di un CD, tenete
premuto uno dei due tasti. L'unità avvia il riavvolgimento o l'avanzamento rapido delle
tracce del CD. Per arrestare il riavvolgimento o l'avanzamento rilasciate il tasto.
RIPETIZIONE
Per ripetere la riproduzione della traccia corrente premete due volte il tasto REP.
L'indicatore di riproduzione ripetuta inizia a lampeggiare. Per ripetere tutte le tracce
premere due volte il tasto REP.. L'indicatore di riproduzione ripetuta si illumina sso.
Per annullare la funzione, premete di nuovo il tasto REP.. L'indicatore di riproduzione
ripetuta si spegne.
RIPRODUZIONE PROGRAMMATA
1. Quando la riproduzione è in modalità di arresto, premete il tasto “ inizia PROG.
a lampeggiare sul display.
2. Selezionate il le che desiderate ascoltare con i tasti e . Premete il tasto PROG.
per confermare. Durante la programmazione l'indicatore di riproduzione programmata
lampeggia.
3. Riperi i passi precedenti per programmare no a 20 tracce.
4. Premete il tasto per avviare la riproduzione programmata. L'indicatore di
riproduzione pogrammata si illumina sso.
5. Per annullare la funzione premete due volte il tasto . L'indicatore di riproduzione
pogrammata si spegne.
In caso di problemi con la riproduzione di CD audio cercare di risolvere il problema come
suggerito di seguito:
1. Spegnere l'unità. Scollegare la presa di alimentazione CA e ricollegare.
2. Pulire il CD.
1. Schuif de functieschakelaar naar de stand CD/AUX. De AAN-indicator licht op.
2. Open de CD-deur. Plaats een CD met het label omhoog gericht en sluit de CD-deur. Na
een paar seconden zal het totaal aantal tracks op het display worden getoond.
3. Druk op om het afspelen te starten. Het huidige tracknummer wordt getoond op het
display. De indicator licht op.
AFSPELEN/PAUZEREN
Druk om het afspelen tijdelijk te stoppen op . De indicator knippert.
Druk om het afspelen te hervatten nogmaals op de knop.
STOPPEN
Als er tijdens het afspelen op wordt gedrukt, dan stopt het afspelen van de disc. (Het
totaal aantal tracks wordt getoond op het display).
OVERSLAAN EN VOORUIT-/TERUGSPOELEN
U kunt altijd naar het volgende of vorige nummer gaan door op OVERSLAAN ( / ) te
drukken. Houd tijdens het afspelen van een audio-CD de OVERSLAAN-knoppen ingedrukt
om vooruit of achteruit te spoelen. Het normale afspelen wordt hervat wanneer u de knop
loslaat.
HERHALEN
Druk om de track die wordt afgespeeld te herhalen één keer op de toets REP. De
herhaalindicator knippert. Druk om alle tracks te herhalen twee keer op de toets REP. De
herhaalindicator licht op en blijft opgelicht. Druk om de herhaalfunctie te annuleren een
derde keer op REP. De herhaalindicator is nu niet langer opgelicht.
PROGRAMMA AFSPELEN
1. Druk als het afspelen gestopt is op de toets. “ knippert op het display. PROG.
2. Selecteer het bestand dat u wilt afspelen via de toetsen. Druk op de / PROG.
toets om te bevestigen. De programma-indicator knippert tijdens het programmeren op
het display
3. Herhaal de bovenstaande stappen om tot 20 tracks te programmeren.
4. Druk op de toets om het geprogrammeerd afspelen te starten. De programma-
indicator licht op en blijft opgelicht.
5. Druk om het afspelen van het programma te annuleren twee keer op de toets . De
programma-indicator is nu niet langer opgelicht.
Als u problemen tegenkomt bij het afspelen van CD's, kunt u dit op de volgende manieren
verhelpen:
1. Schakel het apparaat uit. Trek de stekker uit het stopcontact en steek hem daarna weer
in het stopcontact.
2. Maak de CD schoon.
1. Deslice el interruptor de función hasta la posición CD/AUX. Conecte su fuente auxiliar
(por ejemplo, un reproductor de MP3) a la toma AUX IN de la parte derecha de la
unidad (cable no incluido). El aparato pasará al modo auxiliar automáticamente.
2. Empiece el playback desde la fuente AUX IN.
3. Ajuste el volumen hasta el nivel deseado.
4. Para parar el playback, desconecte la fuente AUX-IN de la entrada AUX- IN.
Nota: Una vez haya desconectado el cable de audio de la toma AUX IN, la unidad pasará
al modo CD automáticamente.
1. Scorrete l'interrutore di funzione in posizione CD/AUX. Collegate la sorgente ausiliaria
(es.lettore MP3) alla presa posta sul retro dell’apparecchio (cavo non incluso). AUX IN
L'unità entra in automatico in modalità AUX.
2. Avviate la riproduzione dalla sorgente ausiliaria.
3. Regolate il volume al livello desiderato.
4. Per arrestare la riproduzione scollegate la sorgente ausiliaria dalla presa AUX IN.
Nota: Una volta scollegato il cavo audio dalla presa AUX IN jack l'unità passa in
automatico alla modalità CD.
1. Schuif de functieschakelaar naar de stand . Sluit uw hulpbron (bv. mp3-CD/AUX
speler) aan op de AUX IN-aansluiting aan de rechterkant van het apparaat (kabel niet
meegeleverd). Het apparaat schakelt automatisch naar de AUX-modus.
2. Start het afspelen van uw hulpbron.
3. Stel het geluidsvolume in op het gewenste niveau.
4. Om het afspelen te stoppen, trekt u de externe audiobron uit de AUX IN aansluiting.
Opmerking: Zodra de audiokabel wordt losgekoppeld van de aux-ingang zal het apparaat
automatisch naar de CD-modus schakelen.
Limpieza
ATENCIÓN: Desconecte este aparato de toda fuente de alimentación antes de limpiarlo.
- Utilice un paño suave, limpio y seco. Limpie regularmente los oricios de ventilación de
la parte trasera del aparato y de los laterales.
- El uso de disolventes o productos abrasivos o a base de alcohol puede dañar el
aparato.
- Si un objeto o un líquido penetra en el aparato, desenchúfelo inmediatamente y
póngase en contacto con personal técnico cualicado.
Notas relativas a los disco
* No utilice discos con formas especiales (octogonales, en forma de corazón, etc.), ya
que podrían ocasionar un fallo en el funcionamiento del aparato.
* No introduzca más de un disco en el compartimento.
* No intente abrir el compartimento del disco durante la reproducción.
* No toque la lente del reproductor; si lo hace, podría producirse un fallo en el
funcionamiento del aparato.
* Un disco cuya supercie esté rayada, contenga polvo o huellas puede ocasionar fallos
en el funcionamiento del aparato. Antes de comenzar la reproducción, limpie el disco
con un paño limpio. Para ello, frótelo desde el centro hacia los bordes. No guarde los
discos en lugares con temperaturas elevadas o una humedad considerable; podrían
deformarse. Una vez que haya escuchado el disco, guárdelo en su estuche.
Nota importante
• Retire el disco del compartimento cuando transporte el aparato.
Pulizia
ATTENZIONE: Scollegare l’apparecchio dalla fonte di alimentazione prima di pulirlo.
- Servitevi di un panno morbido e asciutto. Spolverate regolarmente le aperture di
ventilazione poste sul retro o ai lati dell’apparecchio.
- Il ricorso a solventi oppure a prodotti abrasivi o a base d’alcool rischia di danneggiare
l’apparecchio.
- Se un oggetto o un liquido entra nell’apparecchio, scollegate immediatamente
l’apparecchio dalla corrente e afdatelo ad un tecnico autorizzato.
Osservazioni sui dischi
* Non utilizzate dischi di forma irregolare (ad esempio ottagonali o a forma di cuore).
L’apparecchio potrebbe non funzionare correttamente.
* Non inserite più di un disco nello scomparto.
* Non cercate di aprire il compartimento CD mentre la riproduzione è in corso.
* Non toccate la lente per non provocare un malfunzionamento.
* Se il disco è rigato, sporco o presenta impronte digitali, è possibile che l'apparecchio
non funzioni. Prima della riproduzione, pulite il disco con un panno. Pulite delicatamente
dal centro verso l'esterno. Non riponete i dischi in luoghi soggetti a temperature elevate
o a forte umidità. Potrebbero deformarsi. Terminato l’ascolto, riponete il disco nella
sua custodia.
Nota importante
• Estraete il disco dal compartimento se l’apparecchio deve essere trasportato.
OPGEPAST: Koppel het toestel los van elke voedingsbron vooraleer het schoon te
maken.
- Gebruik een propere, zachte, droge doek. Stof de verluchtingsopeningen aan de
achterzijde of zijkanten van het toestel regelmatig af.
- Het gebruik van solventen of bijtende middelen op basis van alcohol kan het toestel
beschadigen.
- Als een object of een vloeistof in het toestel loopt, koppel het dan meteen los en laat het
nakijken door een gekwaliceerd technieker.
Opmerkingen ivm disks
* Gebruik geen disks met een speciale vorm (achthoek, hartvorm, enz.) die het toestel
slecht zou doen werken.
* Plaats maar 1 disk in het compartiment.
* Open het compartiment niet tijdens de weergave.
* Raak de lens niet aan om disfunctie van het toestel te vermijden.
* Een disk met krassen, stof of vingerafdrukken kan slecht werken. Gebruik een zachte,
droge doek om de disk schoon te maken, vooraleer de disk weer te geven. Doe dit
van het midden uit naar de zijkanten toe. Plaats de disks nooit bloot aan vochtigheid
of extreme temperaturen om ze niet te vervormen. Plaats uw disks na de weergave
opnieuw in hun doosjes.
Belangrijke opmerking
• Haal de disk uit het compartiment als het toestel vervoerd moet worden.
Alimentación:
AC 230V 50Hz, consumo 14W
DC 6x1,5V pilas R14/ UM-2/del tipo ”C” (no incluidas)
SECCIÓN DE RADIO:
FM 88-108 MHz
MW 540-1600 kHz
SECCIÓN DE REPRODUCTOR DE CD:
RESPUESTA DE FRECUENCIA : 100Hz -20kHz
PROPORCIÓN SEÑAL A RUIDO: 40dB
SECCIÓN AUX IN: toma AUX de 3,5mm
Nota: Los diseños y especicaciones están sujetos a cambio sin previo aviso.
Alimentatore: CA 230V 50 Hz,potenza assorbita 14W
DC 9V, 4x1.5V batteria tipo R14/UM-2/”C” (non forniti).
RADIO:
FM 88-108MHz
MW 540-1600kHz
LETTORE CD:
RISPOSTA IN FREQUENZA: 100 Hz -20 kHz
RAPPORTO SEGNALE/RUMORE: 40 dB
INGRESSO AUSILIARIO: presa ausiliaria da 3,5 mm
Nota: Il modello e le caratteristiche tecniche possono subire variazioni senza preavviso.
Netstroom: AC 230V 50Hz, Verbruik 14W
DC: 6x1.5V, batterijtype R14/ UM-2/”C” (niet meegeleverd)
Radio:
FM 88-108MHz
MW 540-1600kHz
CD-SPELER:
FREQUENTIERESPONS: 100Hz -20kHz
SIGNAAL-RUISVERHOUDING: 40dB
AUX-INGANG: 3,5mm AUX-aansluiting
Opmerking: Ontwerp en specicaties zijn onderhevig aan verandering zonder kennisgeving.
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France
Dit apparaat werkt op AC 230V 50Hz of 6 x 1.5V R14/ UM-2/“ C“-batterijen (niet
meegeleverd).
AC
Sluit het afneembare AC-snoer (inbegrepen) aan op de AC-aansluiting aan de achterkant
van het apparaat. Steek het AC-snoer in een standaard AC-stopcontact.
Gebruik van de batterijen
Installeer de batterijen in hun compartiment. Gebruik uitsluitend batterijen die voldoen
aan de aanbevelingen van de fabrikant. Respecteer de polariteit wanneer u batterijen
plaatst (zie compartiment). Anders kan het toestel beschadigd raken. Zorg ervoor dat
u geen niet-oplaadbare batterijen oplaadt. Ze zouden kunnen verhitten en ontploffen.
Vervang de batterijen wanneer het volume vermindert of het geluid vervormt tijdens het
gebruik. Om lekken te vermijden dienen de batterijen verwijderd te worden wanneer het
apparaat voor langere tijd niet wordt gebruikt.
OPGELET: Ontplofngsgevaar als de batterijen niet juist geplaatst zijn. Gebruik enkel
identieke of gelijkwaardige batterijen.
Let op!
- Om het apparaat op batterijen te laten werken moet het AC-snoer afgekoppeld zijn van
zowel de aansluiting op het apparaat als van het stopcontact.
- Wanneer het AC-snoer aangesloten is op het apparaat en op het stopcontact, wijzigt de
stroombron automatisch naar AC.
- Als het afspelen is beëindigd en het apparaat niet wordt gebruikt, dan zal het na 10
minuten automatisch uitschakelen om energie te besparen. Schuif de functieschakelaar
naar de stand OFF (UIT) om het apparaat te resetten. Wacht een paar seconden en zet
het apparaat daarna weer AAN.
ANSCHLUSS EINER ZUSATZQUELLE
WARTUNG
TECHNISCHE EIGENSCHAFTEN
STOPP
Wenn die Taste während der Wiedergabe betätigt wird, wird die Wiedergabe der Disc
gestoppt. (Gesamtzahl der Titel wird in der Anzeige angezeigt.)
TITEL ÜBERSPRINGEN / SCHNELLSUCHLAUF
Sie können jederzeit zu der gewünschten Titelnummer springen, indem Sie die
Auswahltasten ( / ) benutzen.
Während der CD-Wiedergabe, halten Sie die SKIP-Taste gedrückt. Das Gerät durchsucht
die CD dann mit hoher Geschwindigkeit vor bzw. zurück. Die normale Wiedergabe wird
fortgesetzt, wenn Sie die Taste loslassen.
WIEDERHOLUNG
Um den momentan wiedergegeben Titel zu wiederholen, betätigen Sie die REP.-Taste.
Die Wiederholungsanzeige fängt an zu blinken.
Um alle Titel zu wiederholen, betätigen Sie die REP.-Taste ein weiteres Mal. Die
REPEAT-Anzeige leuchtet auf.
Um die Wiederholungsfunktion abzubrechen, betätigen Sie die REP.-Taste erneut. Die
Wiederholungsanzeige geht aus.
PROGRAMMWIEDERGABE
1. Wenn die Wiedergabe angehalten ist, drücken Sie auf die Taste blinkt PROG.
in der Anzeige.
2. Wählen Sie die gewünschte Datei mit Hilfe der Tasten / . Drücken Sie
zur Bestätigung die Taste Die Programmanzeige blinkt während des PROG.
Programmieren der Titel.
3. Wiederholen Sie die obigen Schritte für bis zu 20 Titel.
4. Drücken Sie auf die Taste , um die programmierte Wiedergabe zu beginnen. Die
Programmanzeige blinkt auf und leuchtet dann weiter.
5. Um die Programmwiedergabe abzubrechen, betätigen Sie die Taste zweimal. Die
Programmanzeige geht dann aus.
Falls CD-Wiedergabeprobleme auftreten, versuchen Sie sie auf eine der folgenden
Weisen zu beheben:
1. Schalten Sie das Gerät aus, trennen Sie es von der Stromversorgung ab und schließen
Sie es erneut an.
2. Reinigen Sie Ihre Compact-Disc.
1. Schieben Sie den Funktionsschalter in die -Position. Schließen Sie ein CD/AUX
externes Gerät (z.B. MP3-Spieler) an die Buchse rechts am Gerät an (Kabel AUX IN
nicht mitgeliefert). Das Gerät schaltet dann automatisch in den AUX-Modus.
2. Beginnen Sie mit dem Playback Ihrer Zusatzquelle.
3. Stellen Sie die Lautstärke auf den gewünschten Pegel ein.
4. Um das Playback zu beenden, nehmen Sie Ihre Zusatzquelle aus der AUX IN Buchse
heraus.
Hinweis: Sobald das Audiokabel abgetrennt aus dem AUX-Eingang herausgezogen wird,
schaltet das Gerät automatisch in den CD-Modus.
Reinigung
ACHTUNG: Entfernen Sie alle Geräte von den vorhandenen Stromquellen, bevor Sie
das Gerät reinigen.
Verwenden Sie ein weiches, trockenes und sauberes Tuch. Entfernen Sie regelmäßig
den Staub von den Lüftungsöffnungen hinten und an den Seiten.
Die Verwendung von Lösungsmitteln, scharfen Reinigungsmitteln oder alkoholhaltigen
Reinigungsmitteln kann das Gerät beschädigen.
Wenn ein Gegenstand oder eine Flüssigkeit in das Gerät gelangt, ziehen Sie sofort
den Netzstecker und lassen Sie das Gerät von einem zugelassenen Fachmann prüfen.
HINWEISE ZU DEN DISKS
* Verwenden Sie keine CDs mit speziellen Formen (achteckige, herzförmige CDs...), die
Störungen des Gerätes hervorrufen könnten.
* Legen Sie nicht mehr als eine Disk in das CD-Fach ein.
* Versuchen Sie nicht, das CD-Fach während der Wiedergabe zu öffnen.
* Berühren Sie nicht die Linse, denn dadurch könnten Störungen des Gerätes
hervorgerufen werden.
* Eine CD, die Kratzer, Staub oder Fingerspuren aufweist, kann Störungen verursachen.
Nach dem Abspielen, reinigen Sie die CD mit einem Tuch. Reinigen Sie die CD immer
von innen nach außen. Räumen Sie CDs nicht an zu heißen oder nassen Stellen auf,
damit sie nicht verformt werden. Räumen Sie Ihre CDs nach dem Abspielen in der
zugehörigen Hülle auf.
Wichtiger Hinweis
• Vor dem Transport des Geräts die eventuell vorhandene Disc herausnehmen.
Netzstromversorgung:
AC 230V 50Hz, Stromverbrauch 14W
DC: 6 Batterien Typ R14/UM-2/ “C” (nicht im Lieferumfang enthalten)
RADIO:
FM 88-108MHz
MW 540-1600kHz
CD-PLAYER:
FREQUENZBEREICH: 100 Hz - 20 kHz
RAUSCHABSTAND: 40 dB
AUX-BETRIEB: 3,5-mm-AUX-Anschluss
Bemerkung: Gestaltung und Ausführung bleiben Änderungen vorbehalten.
RD-3699 IB MUSE 001 REV0.indd 2 2015/8/10 10:07:54


Product specificaties

Merk: Muse
Categorie: CD-spelers/recorder
Model: MD-205 LD
Kleur van het product: Zwart
Ingebouwd display: Nee
Gewicht: 1300 g
Breedte: 242 mm
Diepte: 179 mm
Hoogte: 112 mm
Gewicht verpakking: 1600 g
Breedte verpakking: 287 mm
Diepte verpakking: 227 mm
Hoogte verpakking: 155 mm
Stroombron: AC/Batterij
Type verpakking: Doos
Aan/uitschakelaar: Ja
Land van herkomst: China
Accu/Batterij voltage: 12 V
Ingebouwde luidsprekers: Nee
Gemiddeld vermogen: - W
Aantal ingebouwde luidsprekers: 2
Ondersteund aantal accu's/batterijen: 6
Draaghandvat: Ja
Aansluiting voor netstroomadapter: Ja
Soort tuner: Analoog
Aantal: 1
Afspeel modi: Next,Previous,Repeat all,Repeat one
Backlight-kleur: Rood
Soort optische drive: Speler
Hoofdtelefoon uit: Nee
Bedieningstoetsen: Play/pause,Stop
Inclusief dockingstation: Nee
Handvat(en): Ja
Thermometer: Nee
MP3 afspelen: Nee
AUX ingang: Ja
Optische drive type: CD,CD-R,CD-RW
Ondersteunde frequentiebanden: FM,MW
Laadmechanisme: Bovenkant
Cassette deck: Nee
Radio: Draagbaar
Compatibele batterij grootte: C,AA
Projectie: Nee
Apple docking-compatibiliteit: Niet ondersteund
FM-band: 88 - 108 MHz
Kleuring: Afbeelding
(Buitenste) hoofdverpakking hoogte: 302 mm
(Buitenste) hoofdverpakking breedte: 472 mm
(Buitenste) hoofdverpakking brutogewicht: 7100 g
(Buitenste) hoofdverpakking lengte: 302 mm
Hoeveelheid per (buitenste) hoofdverpakking: 4 stuk(s)
AC-ingangsspanning: 230 V
AC-ingangsfrequentie: 50 Hz
Stroomverbruik (typisch): 14 W
Batterijtechnologie: Alkaline
Type beeldscherm: LED
Producten per intermodale container (40 ft - High Cube): 4960 stuk(s)
Producten per intermodale container (20 ft): 2440 stuk(s)
MW band bereik: 540 - 1600 kHz
Disc playback modi: Programmering

Heb je hulp nodig?

Als je hulp nodig hebt met Muse MD-205 LD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding CD-spelers/recorder Muse

Handleiding CD-spelers/recorder

Nieuwste handleidingen voor CD-spelers/recorder