Mr Safe Personal Safety System Handleiding

Mr Safe Beveiliging Personal Safety System

Lees hieronder de 📖 handleiding in het Nederlandse voor Mr Safe Personal Safety System (8 pagina's) in de categorie Beveiliging. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

TABLE OF CONTENTS

WHAT IS IN THE BOX?..........................................2

INSTALLATION OF MR SAFE ..............................2

SETTING CALLS TO CARE PROVIDERS

(FAMILY, NEIGHBOURS, ETC.).............................4

RECORDING ALARM MESSAGES AND

INSTRUCTION MESSAGES...................................5

SETTING THE QUIET ALARM OR MODIFYING

THE TIME OF THE LOUD ALARM.........................5

WHAT CAN A REMOTE CARE PROVIDER DO?.......6

LOGGING ON THE REMOTE CONTROL...............6

POWER SUPPLY FAILURE / BATTERIES..............7

EXTRA SETTINGS....................................................7

SUPPORT AND GUARANTEE..................................8

M_mr.Safe_GB.pmd 23.12.2004, 16:181

English

Introduction

Congratulations! You have acquired the mr Safe personal security

system. Security is important. Care providers should be

reachable as soon as possible, if necessary. Your mr Safe will

make sure of that.

Before using the system for the first time, we suggest that you

read this manual to make sure that you know all the main

features and possibilities.

WHAT IS IN THE BOX?

• Remote control on batteries.

• Adapter for the station.

• Telephone cord.

• 2 screws and 2 plugs for wall mounting.

• mr Safe station (see Illustration 1&2).

a. Adapter connector.

b. Telephone line connector.

c. Connector for extra telephone set.

d. Cable guides.

e. Battery case.

f. Assembly grooves.

g. Alarm button 1.

h. Alarm button 2.

i. Alarm stop button.

j. Display.

k. LEDs.

l. Setkeys.

• Short reference guide.

• 4 AAA batteries.

INSTALLATION OF MR SAFE

ADAPTER

At the back of the mr Safe station there are 3 connectors.

The left connector is for the adapter cable. The adapter is to

be inserted into a socket and is applicable for 230VAC / 50

Hz. The socket-outlet should be installed near the equipment

and shall be easily accessible.

TELEPHONE LINE

The telephone cable is to be connected to the middle connector

at the back of the mr Safe station. The other end of the telephone

cable is to be connected to the telephone line. The use of a

switching system between the mr Safe and the telephone line is

not encouraged because of the risk of a power supply failure. If

you need to dial a ‘0’ with your ordinary telephone set when

dialling the telephone number, you have to set the switching

system or ISDN adapter at ‘direct outward dialling system’.

M_mr.Safe_GB.pmd 23.12.2004, 16:182

English

EXTRA TELEPHONE SET

The right connector allows the mr Safe station to be connected

in-between the analogous PTT line and your telephone set. This

way, it is not necessary to buy an extra socket or transit connector.

CABLE GUIDANCE

Depending on where you would like to install the mr Safe

station, you can guide the cables upwards or downwards.

BATTERIES

As the mr Safe station needs to continue operating in case

of a temporary power supply failure, some batteries are to

be inserted. To this effect, you can remove the screw from

the battery cover and open the battery case. The batteries

are to be positioned as indicated in Illustration 1. The mr

Safe operates on 4 AAA alkaline batteries.

MOUNTING

The mr Safe station is prepared for wall mounting. To this effect,

you place the 2 supplied screws (with the plugs if necessary) at

a distance of 6.2 cm from one another in the wall.

The mr Safe station is equipped with 2 rubber caps and 2 hard

plastic supports for horizontal positioning. mr Safe is not liable

for any damage that may be caused to your furniture.

SETTING THE CLOCK

To realize some settings, you need to open the little flap on the

front. On both sides of this flap, edges are made for convenience.

The date and time are to be set as follows:

• Press the PROG key.

• Then press the # key.

• Enter the date (day and month) and the time.

• Again press the PROG key.

For example 1 April, 9:30 is to be set as follows: PROG, #, 01 04

09 30, PROG.

SETTING TELEPHONE LINE

Nearly all the telphone lines are tone-operated. When your

ordinary telephone set is tone-operated, you will hear tones

when dialling a number. This is the default setting of the mr

Safe station.

In case of older telephone lines, the pulse-operated mode is

to be set. In this case, you will hear pulses when dialling a

number with your ordinary telephone set.

The above setting is effected as follows:

• Press PROG.

• Press 3 and then 1.

• Again press PROG.

After pressing 1, you will see PULS appear on the display.

M_mr.Safe_GB.pmd 23.12.2004, 16:183

Product specificaties

Merk:	Mr Safe
Categorie:	Beveiliging
Model:	Personal Safety System

Heb je hulp nodig?

Als je hulp nodig hebt met Mr Safe Personal Safety System stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Beveiliging Mr Safe

Mr Safe Wireless HD IP Camera PRO - Indoor Handleiding

15 Augustus 2023

Mr Safe Personal Safety System Handleiding

15 Augustus 2023

Mr Safe Android APP Handleiding

15 Augustus 2023

Mr Safe APPLE APP Handleiding

15 Augustus 2023

Mr Safe SD-100 - SMOKE DETECTOR Handleiding

15 Augustus 2023

Handleiding Beveiliging

Nieuwste handleidingen voor Beveiliging

Geemarc SOS-PRO 295 Handleiding

6 Maart 2024

One2track Safety Angel Handleiding

16 Oktober 2023

Sygonix SY-3851632 Handleiding

16 Oktober 2023

Sygonix 1326052 Handleiding

16 Oktober 2023

Sygonix 43588A WLAN Camera Handleiding

16 Oktober 2023

Sygonix 43176S LAN Camera Handleiding

16 Oktober 2023

Sygonix SY-3181234 Handleiding

16 Oktober 2023

Sygonix Touch IP65 Handleiding

16 Oktober 2023

Sygonix 1882082 Handleiding

16 Oktober 2023

Sygonix SY-3822408 Handleiding

16 Oktober 2023