Moxa ioLogik E2214 Handleiding

Moxa Niet gecategoriseerd ioLogik E2214

Lees hieronder de 📖 handleiding in het Nederlandse voor Moxa ioLogik E2214 (106 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 75 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/106

Click&Go V2 User’s Manual

Second Edition, December 2008

www.moxa.com/product

Reproduction without permission is prohibited.

Click&Go V2 User’s Manual

The software described in this manual is furnished under a license agreement, and may be used only in

accordance with the terms of that agreement.

Reproduction without permission is prohibited.

Trademarks

MOXA is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice, and does not represent a commitment on the

part of Moxa.

Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but

not limited to, its particular purpose. Moxa reserves the right to make improvements, and/or changes to this

manual, or to the products, and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate, and reliable. However, Moxa assumes no

responsibility for its use, or for any infringements on the rights of third parties that may result from its use.

This manual might include unintentional technical or typographical errors. Changes are made periodically to the

information herein to correct such errors, and these changes are incorporated into new editions of the manual.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll-free: 1-888-669-2872

Tel: +1-714-528-6777

Fax: +1-714-528-6778

Moxa China (Shanghai office):

Toll-free: 800-820-5036

Tel: +86-21-5258-9955

Fax: +86-10-6872-3958

Moxa Europe:

Tel: +49-89-3 70 03 99-0

Fax: +49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel: +886-2-8919-1230

Fax: +886-2-8919-1231

Table of Contents

Chapter 1. Introduction ...............................................................................................1-1

Overview .............................................................................................................................. 1-2

Click&Go V2 Features ......................................................................................................... 1-3

Product and Software Support ...................................................................................... 1-3

Difference in Programming Method and Space............................................................ 1-4

Difference in IF Conditions.......................................................................................... 1-5

Difference in THEN/ELSE Actions ............................................................................. 1-6

Click&Go Version Check............................................................................................. 1-7

Chapter 2. Getting Started ..........................................................................................2-1

Hardware Connection........................................................................................................... 2-2

System Requirements ................................................................................................... 2-2

Connecting to the Network........................................................................................... 2-3

Optional Liquid Crystal Display Module (LCM) ......................................................... 2-3

Adding More I/O Channels .......................................................................................... 2-3

Connecting the I/O Device ........................................................................................... 2-4

Software Preparation ............................................................................................................ 2-4

ioAdmin 3.x Installation............................................................................................... 2-4

Firmware Update.......................................................................................................... 2-7

Reset to Factory Default............................................................................................... 2-8

Chapter 3. Click&Go V2 Developing Process ...........................................................3-1

Click&Go V2 Development Process .................................................................................... 3-2

I/O Configuration ................................................................................................................. 3-2

Configurable DIO Channel Mode Selection................................................................. 3-2

Digital Input Mode Selection........................................................................................ 3-3

Digital Output Mode Selection..................................................................................... 3-4

Analog Input Mode Selection....................................................................................... 3-5

Analog Output Mode Selection .................................................................................... 3-6

Temperature Input Mode Selection .............................................................................. 3-6

Alias Name Configuration............................................................................................ 3-8

Testing the I/O Channels .............................................................................................. 3-9

Define Global Variables........................................................................................................ 3-9

Internal Register Settings............................................................................................ 3-10

Timer Settings............................................................................................................. 3-10

SNMP Trap Server ..................................................................................................... 3-11

E-Mail Server ............................................................................................................. 3-11

Active Message Server............................................................................................... 3-12

Work with Logic................................................................................................................. 3-13

Click&Go Logic Basics.............................................................................................. 3-13

IF Conditions.............................................................................................................. 3-16

More Info on Repeat Interval vs. Edge Detection ...................................................... 3-26

THEN/ELSE Actions.................................................................................................. 3-29

Peer-to-Peer Function................................................................................................. 3-42

Activating the Rule-set....................................................................................................... 3-45

Download, Restart and Run........................................................................................ 3-45

Rule-set Management Bar .......................................................................................... 3-45

Import/Export Configuration.............................................................................................. 3-46

Using ioAdmin to Import/Export Configuration ........................................................ 3-46

Product specificaties

Merk:	Moxa
Categorie:	Niet gecategoriseerd
Model:	ioLogik E2214
Stroom:	5 A
Soort serieële aansluiting:	RS-485
Aantal Ethernet LAN (RJ-45)-poorten:	1
Relatieve luchtvochtigheid:	5 - 95 procent
Ondersteunde netwerkprotocollen:	Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, CGI, SNTP
Stroomverbruik:	282 mA
Soort kabel:	AWG
Aantal kanalen:	12 kanalen
Afmetingen (B x D x H):	115 x 79 x 45.63 mm
Isolatie:	3 kV
Electrostatic Discharge (ESD) bescherming:	15 kV
Module type:	Digitaal
Signaal directie:	Invoer/uitvoer
Kanaal type:	Relay-kanaal