Moxa AWK-3131-M12-EU Handleiding

Moxa Wifi-repeater AWK-3131-M12-EU

Lees hieronder de 📖 handleiding in het Nederlandse voor Moxa AWK-3131-M12-EU (16 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

 11 . A20 Moxa Inc ll rights reserved.

P/N: 1802031310010

AWK- 3131

Hardware Installation Guide

Moxa AirWorks

First Edition, February 2011

- - 2

Overview

Moxa's new AWK- -3131 3 in-1 industrial wireless AP/bridge/client meets

the growing need for faster data transmission speeds and wider coverage

by supporting IEEE 802.11n technology with a net data rate of up to 300

Mbps. The AWK-3131 combines two adjacent 20 MHz channels into a

single 40 MHz channel to deliver a potent combination of greater

reliability and more bandwidth. The two redundant DC power inputs

increase the reliability of the power supply, and the AWK-3131 can be

powered via PoE to make deployment easier. The AWK-3131 can operate

on either the 2.4 or 5 GHz bands and is backward-compatible with

existing 802.11a/b/g deployments to future-proof your wireless

investments.

Package Checklist

M -313oxa’s AWK 1 is shipped with the following items. If any of these

items is missing or damaged, please contact your customer service

representative for assistance.

• AWK- 3131

• 2 dual- - - band omni directional antennas (2dBi, RP SMA, 2.4/5 GHz)

• Cable holder with one screw

• 3 protective caps

• DIN- rail kit

• Documentation and software CD

• Quick installation guide (printed)

• Warranty card

Recommended SFP Accessories

SFP- 1G series

• SFP- 1GSXLC:

Small form factor pluggable transceiver with 1000BaseSX, LC, 0.5 km,

0 to 60°C

• SFP- - 1GSXLC T:

Small form factor pluggable transceiver with 1000BaseSX, LC, 0.5 km,

- 20 to 75°C

• SFP- 1GLSXLC:

Small form factor pluggable transceiver with 1000BaseLSX, LC, 2 km,

0 to 60°C

• SFP- - 1GLSXLC T:

Small form factor pluggable transceiver with 1000BaseLSX, LC, 2 km,

- 40 to 85°C

• SFP- 1GLXLC:

Small form factor pluggable transceiver with 1000BaseLX, LC, 10 km,

0 to 60°C

• SFP- - 1GLXLC T:

Small form factor pluggable transceiver with 1000BaseLX, LC, 10 km,

- 40 to 85°C

• SFP- 1GLHLC:

Small form factor pluggable transceiver with 1000BaseLH, LC, 30 km,

0 to 60°C

• SFP- - 1GLHLC T:

Small form factor pluggable transceiver with 1000BaseLH, LC, 30 km,

- 40 to 85°C

- - 3

• SFP- 1GLHXLC:

Small form factor pluggable transceiver with 1000BaseLHX, LC, 40

km, 0 to 60°C

• SFP- - 1GLHXLC T:

Small form factor pluggable transceiver with 1000BaseLHX, LC, 40

km, -40 to 85°C

• SFP- 1GZXLC:

Small form factor pluggable transceiver with 1000BaseZX, LC, 80 km,

0 to 60°C

• SFP- - 1GZXLC T:

Small form factor pluggable transceiver with 1000BaseZX, LC, 80 km,

- 40 to 85°C

• SFP- 1GEZXLC:

Small form factor pluggable transceiver with 1000BaseEZX, LC, 110

km, 0 to 60°C

• SFP- - 1GEZXLC 120:

Small form factor pluggable transceiver with 1000BaseEZX, LC, 120

km, 0 to 60°C

Installation and Configuration

Before installing the AWK- 331 1, make sure that all items in the Package

Checklist are in the box. In addition, you will need access to a notebook

computer or PC equipped with an Ethernet port. The AWK- 331 1 has a

default IP address that you must use when connecting to the device for

the first time.

Step 1: Select the power source

The AWK- 331 1 can be powered by a DC power input or PoE (Power over

Ethernet). The AWK- 3 31 1 will use whichever power source you choose.

Step 2: Connect the AWK 1 to a notebook or PC- 331

Since - 3 - -the AWK 31 1 supports MDI/MDI X auto sensing, you can use

either a straight-through cable or crossover cable to connect the

AWK- 331 1 to a computer. If the LAN LED indicator on the AWK- 331 1 port

lights up, it means the connection is established.

Step 3: Set up the computer’s IP address

Set an IP address on the same subnet as the AWK 1. Since - 331 the

AWK- 331 1’s default IP address is 192.168.127.253, and the subnet mask

is 255.255.255.0, you should set the IP address of the computer to

192.168.127.xxx 55.255.255.0 and subnet mask to 2 .

Step 4: Use the web-based manager to configure

AWK- 31 31

Open your computer’s web browser and then type

http://192.168.127.253 in the address field to access the homepage

of the web-based management. Before the homepage opens, you will

need to enter the user name and password. For first-time configuration,

enter the default user name and password and then click on the Login

button:

User name: admin

Password: root

Product specificaties

Merk:	Moxa
Categorie:	Wifi-repeater
Model:	AWK-3131-M12-EU
Gewicht:	970 g
Stroomvoorziening:	12 - 48 VDC
LED-indicatoren:	Ja
Connectiviteitstechnologie:	Draadloos
Frequentieband:	2.412 - 2.472, 5.18 - 5.24 GHz
Aansluiting voor netstroomadapter:	Ja
Modulatie:	16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, DSSS, OFDM, QPSK
Netwerkstandaard:	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ondersteunde beveiligingsalgoritmen:	WEP, WPA, WPA2
Antenne versterkingsniveau (max):	2 dBi
Temperatuur bij opslag:	-40 - 85 °C
Power LED:	Ja
MAC adres filtering:	Ja
DHCP server:	Ja
Veiligheid:	UL 60950-1, EN 60950-1
Bedrijfstemperatuur, bereik:	-13 - 140 °F
Aansluiting antenne:	QMA
Mean time between failures (MTBF):	388581 uur
Maximale overdrachtssnelheid van gegevens:	300 Mbit/s
DHCP client:	Ja
Power over Ethernet (PoE):	Ja
Ondersteunde protocollen:	Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
Afmetingen (B x D x H):	53.6 x 135 x 105 mm
Full duplex:	Ja
DC-uitgangsspanning:	48 V
Bedrijfstemperatuur (T-T):	-25 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Connectivity LEDs:	Ja