Motorola MTIB405MV Handleiding

Bekijk gratis de handleiding van Motorola MTIB405MV (3 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.1 sterren uit 9 reviews. Heb je een vraag over Motorola MTIB405MV of wil je andere gebruikers van dit product iets vragen? Stel een vraag

•It is recommended to install the network connector

cap for exterior installations

•The DC12V power supply is not necessary when the

camera is connected directly to a PoE device.

Connecting the network cable

3. Product Overview

CAMERA

CD

QUICK GUIDE

3 PLASTIC SCREW PLUGS

NETWORK CONNECTION

3 Tapping screws

PA 4X25

1Fixing ring3Network cable

2Mounting base4Power cable

IP BULLET CAMERA

IP BULLET VARIFOCAL CAMERA

CAMERA

QUICK GUIDE3 Tapping screws PA 4X25

1 PWM 3X5MACHINE SCREW

3 PLASTIC

SCREW PLUGS

DRILLING

TEMPLATE

RUBBER PLUG

CD

1.Remove the connector cap by unscrewing it.

2.Run a network cable through the two caps parts and

install RJ45 connector to cable and connect both

cables together .

3.Screw together the cap parts and then screw cap to

the camera network connector cable .

4. Installation

•

Please make sure that the wall or ceiling is strong

enough to withstand 3 times the weight of the camera.

Please install and use the camera in the dry

environment.

1. Drill the screw holes and the cable hole on the mounting

surface using the available drill template.

2. Install rubber plug for exterior installations.

3. Route the cables through the cable hole and screw

in place base to mounting surface.

RUBBER PLUG

MOUNTING BASE

IP camerabullet

Quick Guide

IP varifocal camerabullet

Quick Guide

•Please, read carefully these instructions before

operating your camera and save this as reference.

•All examples and images used in this guide are only

for reference.

•The content of this guide is subject to changes

without previous notice.

1. Precautions

•If the product does not work properly, please contact

your dealer or the nearest service center. Never

attempt to disassemble the camera yourself. Your

warranty will be voided if any problems are caused

by unauthorized repair or maintenance.

•

•

Handle with care and prevent dropping the camera.

When the product is mounted on a wall or ceiling,

ensure that the device is properly firmly fixed.

•Prevent touching the lens of the camera.

•

•

If cleaning is necessary, please use a clean cloth to

wipe it gently. If the device will not be used for a long

time, please cover the lens cap to protect the device

from dust.

Prevent aiming the camera directly to the sun or to

very bright environments.

•Do not place the camera in extremhot or coldely

environments (operating temperatureis -20˚C~50˚C),

dusty or damp locations.

•Para evitar exceso de calentamiento To avoid increase

in heat of product, good ventilation is required.

2. Contents

Product specificaties