Monacor LEDS-5MP/WS Handleiding

Monacor Verlichting LEDS-5MP/WS

Lees hieronder de 📖 handleiding in het Nederlandse voor Monacor LEDS-5MP/WS (1 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 28307 Bremen Germany
Copyright
© by MONACOR INTERNATIONAL. All rights reserved. A-1594.99.02.06.2021
LEDS-5/...
LEDS-5MP/...
LEDS-5MPE /...
LEDS-5MPL /...
LEDS-10MP/...
LEDS-55MP/...
English
Deutsch
Hinweise zur Montage
der LED-Streifen
Je nach Montageort müssen die LED-Streifen mit
den beiliegenden Halteclips befestigt werden. Die
selbstklebende Rückseite der LED-Streifen gibt
nicht immer einen ausreichenden Halt (z. B. bei
erhöhten Umgebungstemperaturen).
Für die LED-Streifen LEDS-5 /…, denen keine Halteclips
beiliegen, können folgende Halterungen verwendet
werden:
Artikel für LED-Streifen mit einer Breite von
LEDS-10H 8 mm
LEDS-12H 10 mm
Nota Referente
al Montaje de Tiras LED
Dependiendo del lugar de montaje, las tiras LED
tienen que fijarse mediante las pinzas de sujeción
entregadas. Puede que la parte posterior auto-
adhesiva de las tiras LED no asegure del todo las
tiras (p. ej. si la temperatura ambiente es alta).
Para las tiras LEDS-5 /… que no se entregan con pin-
zas de sujeción, se pueden utilizar los siguientes so-
portes:
Producto Para tiras LED con un ancho de
LEDS-10H 8 mm
LEDS-12H 10 mm
Español
Conseil de montage
pour les flex-leds
Selon le lieu de montage, il faut fixer les flex-leds
avec les clips de maintien livrés. La face arrière
auto-collante des flex-leds peut ne pas toujours
assurer un maintien suffisant (par exemple en cas
de température ambiante élevée).
Pour les flex-leds LEDS-5 /..., qui ne sont pas livrés avec
des clips, vous pouvez utiliser les supports suivants :
Article pour flex-leds avec une largeur de
LEDS-10H 8 mm
LEDS-12H 10 mm
Français
Note with Regard
to LED Strip Mounting
Depending on the mounting location, the LED
strips must be fastened by means of the retaining
clips supplied. The self-adhesive back of the LED
strips may not always secure the strips as required
(e. g. in case of high ambient temperatures).
For the LED strips LEDS-5 /… which are not supplied
with retaining clips, the following supports can be
used:
Item for LED strips with a width of
LEDS-10H 8 mm
LEDS-12H 10 mm
Avviso per il montaggio
di strisce a LED
A seconda del luogo di montaggio, le strisce a
LED devono essere fissate con i clip di fissaggio
in dotazione. Il retro autoadesivo delle strisce non
garantisce sempre un fissaggio sufficiente (p. es. in
caso di temperature ambientali alte).
Per le strisce LEDS-5 /…, che sono consegnate senza
clip di fissaggio si possono usare i seguenti supporti:
Articolo per strisce a LED della larghezza di
LEDS-10H 8 mm
LEDS-12H 10 mm
Italiano
Uwagi dotyczące
montażu pasków diodowych
Zależnie od miejsca montażu, pasek diodowy na-
leży przymocować za pomocą dołączonych zacze-
pów. W niektórych przypadkach, taśma samoprzy-
lepna znajdująca się na tylnej stronie paska może
nie bwystarczająco wytrzymała (np. w miejscach
o wysokiej temperaturze).
Paski diodowe serii LEDS-5 /… dostarczane bez
zaczepów montażowych. Należy użyć następujących
zaczepów dostępnych osobno:
Produkt do paska diodowego o szerokości
LEDS-10H 8 mm
LEDS-12H 10 mm
Polski


Product specificaties

Merk: Monacor
Categorie: Verlichting
Model: LEDS-5MP/WS

Heb je hulp nodig?

Als je hulp nodig hebt met Monacor LEDS-5MP/WS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting Monacor

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting