MiOYOOW XY-Y50H Handleiding
Bekijk gratis de handleiding van MiOYOOW XY-Y50H (3 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.9 sterren uit 3 reviews. Heb je een vraag over MiOYOOW XY-Y50H of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/3
1.Description:
XY-Y50H is a high-power 50W+50W HIFI Stereo Bluetooth 5.1 Audio Amplifier Module which also can
be controlled by APP Sinilink and remote controller. It can modify the Bluetooth name and password, also
can turn ON/OFF Bluetooth prompt tone. 2.0 channels audio signal output. Built-in amplifier module
therefore it can connect to loudspeaker directly. It is ideal for DIY wireless Bluetooth speakers and
transponders.
2.Features:
1>.Bluetooth APP Control
2>.Remote Control
3>.Bluetooth/AUX/U-disk Audio Input
4>.HIFI 50W+50W Dual Channel Stereo
5>.ON/OFF Prompt Voice
6>.Modify Bluetooth Name
7>.ON/OFF Bluetooth Password
8>.Modify Bluetooth Password
9>.Adjust Volume for Prompt Voice
10>.360° Infinite Adjust Volume
3.Parameters:
1>.Product name:XY-Y50H 50W+50W HIFI Stereo Bluetooth 5.1 Amplifier Module
2>.Model:XY-Y50H
3>.Work Voltage:DC 9V-24V(12V or more recommended)
4>.Work Current:>5A
5>.Unique function:Sinilink APP control
6>.Controller IC: TPA3116
7>.Channel:2.0 channel stereo output
8>.Bluetooth:BLE 5.1
9>.Audio input type:Bluetooth
10>.Audio output type:Left/Right
11>.Adjust volume:360° Potentiometer adjustment
12>.Frequency range:20Hz-20KHz
13>.Output power:
13.1>.Output power 10W*2 at 12V 8ohm
13.2>.Output power 20W*2 at 12V 4ohm
13.3>.Output power 30W*2 at 24V 8ohm
13.4>.Output power 50W*2 at 21V 4ohm
13.5>.The voltage cannot exceed 21V at 4ohm
13.6>.The voltage cannot exceed 24V at 8ohm
14>.Communication distance:15meter(Max)
15>.Over temperature protection:Yes
16>.Short circuit protection:Yes
17>.Over voltage protection:Yes
18>.Under voltage protection:Yes
19>.Clipping protection:Yes
20>.Work Temperature:-20 ~85℃ ℃
21>.Work Humidity:5%~95%RH
22>.Module Size(Installed):70*52*24mm
4.Use steps:
1>.Choose the right speakers and connect as shown in wiring diagram.
2>.Connect to right power supply from DC-005 power socket.LED indicator will flashing and it means that
module enters pairing mode.And then speak prompt voice and it means that module is waiting for pairing.
3>.Turn ON Bluetooth on phone.
4>.Select Bluetooth device ‘XinYi’ or modified name in your Bluetooth device listing.
5>.LED indicator will keep ON and it means that module is successfully connected and is waiting for
playing.
6>.XY-Y50H will playing music after select music on phone.LED indicator will keep slowly blinking.
7>.Adjust potentiometer to change volume as you need.
8>.Open APP Sinilink and register an account if need control by APP. Note: You can choose to log in as
a tourist without registering.
9>.Click the dot in the left to add device.
10>.Select ‘Bluetooth devices’ and then Search Bluetooth.
11>.Select devices ‘Sinilink-APP’ or ‘XinYi’ or ‘XYV122V....’ to connect module.
12>.User can adjust volume, select next or previous, play/pause, select EQ, reset name,
enable/disable/set password, enable/disable Bluetooth prompt tone.
13>.XY-Y50H will speak prompt voice if disconnected.
5.Application:
1>.Modified/repair/replace speaker
2>.Amplifier equipment for training/activity site and so on
3>.Car Bluetooth device
4>.Music Festival Party
5>.Family entertainment and leisure
6>.Games and Cinema
6.Note:
1>.The power amplifier board should be as far away as possible from the WIFI signal (router) avoid
signal interference.
2>.It is power supply voltage DC 9V-24V with more than 5A current. Module will be damaged if input
voltage is more than 24V.
3>.It is recommended to use a working power supply of more than 12V.
4>.Please don’t use too long wires to avoid signal interference.
5>.There can be enough power output only when the audio input is sufficient and the power supply
voltage/current input is sufficient.
6>.The higher the power supply voltage, the greater the output power.
7>.The smaller the impedance of the speaker, the greater the output power. It is recommended to use
4ohm speaker.
8>.Please read use manual and description before use.
Product specificaties
| Merk: | MiOYOOW |
| Categorie: | Receiver |
| Model: | XY-Y50H |
Heb je hulp nodig?
Als je hulp nodig hebt met MiOYOOW XY-Y50H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Receiver MiOYOOW
2 Mei 2025
Handleiding Receiver
- WyreStorm
- Intelix
- Bluesound
- Vimar
- Canyon
- EMOS
- Reloop
- MEE Audio
- Whirlwind
- Taramps
- Koda
- Audison
- Lumantek
- Fusion
- Rexing
Nieuwste handleidingen voor Receiver
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025