Milwaukee 2726-20 Handleiding

Milwaukee Grastrimmer 2726-20

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee 2726-20 (16 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Cat. No. / No de cat.
2726-20
M18â„¢ HEDGE TRIMMER
TAILLE-HAIE M18â„¢
CORTADORA DE SETOS M18â„¢
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and speciî‚¿ca-
tions provided with this power tool. Failure to follow
all instructions listed below may result in electric shock,
î‚¿re and/or serious injury. Save all warnings and in-
structions for future reference. The term "power
tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodiî‚¿ed
plugs and matching outlets will reduce risk of electric
shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your î‚¿nger on the
switch or energizing power tools that have the switch
on invites accidents.
• Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair can
be caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch does not turn
it on and o. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may aect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of î‚¿re when used with
another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and î‚¿re.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make
a connection from one terminal to another. Shorting
the battery terminals together may cause burns or a î‚¿re.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, ush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
3
• Do not use a battery pack or tool that is damaged or
modiî‚¿ed. Damaged or modiî‚¿ed batteries may exhibit
unpredictable behavior resulting in î‚¿re, explosion or
risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to î‚¿re or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range speciî‚¿ed in the instructions. Charging im-
properly or at temperatures outside the speciî‚¿ed range
may damage the battery and increase the risk of î‚¿re.
SERVICE
• Have your power tool serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
HEDGE TRIMMERS
•
DANGER
Keep hands away from blade.
Contact with blade will result in
serious personal injury. Keep all parts of the body
away from the cutter blade. Do not remove cut
material or hold material to be cut when blades
are moving. Make sure the switch is o when
clearing jammed material. Blades coast after
turned o. A moment of inattention while operating
the trimmer may result in serious personal injury.
• Use both hands when operating the trimmer. Using
one hand could cause loss of control and result in
serious personal injury.
• Carry the trimmer by the handle with the cutter
blade stopped. When transporting or storing the
trimmer always î‚¿t the cutting device cover. Proper
handling of the trimmer will reduce possible personal
injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
•Do not use tool while standing on a ladder, rooftop,
or unstable support. Stable footing on a solid surface
enables better control of the tool in unexpected situations.
• Always wear eye protection, hearing protection,
and protective clothing and footwear. Wear heavy,
long pants, long sleeves, boots, and gloves. Contain
long hair. Do not wear loose clothing or jewelry. Do
not wear short pants, sandals, or go barefoot.
•Risk of eye injury. Keep bystanders at least 15' away
during use. Objects may be thrown or ricochet in
all directions.
•Handles and guard must be properly installed during
use. Using the trimmer without both handles and the
guard installed can result in serious personal injury.
•Use both hands when operating the trimmer. Maintain
a î‚¿rm grip. Using one hand could cause loss of control
and result in serious injury.
• Do not use guard as a handle.
• Before starting the trimmer check the work area for
hidden objects, such as wires, fencing, etc. Striking
a solid object could cause loss of control and serious
personal injury.
• Do not start the trimmer with blade in contact with
an object. Allow tool to reach full speed before starting
the job.
• Never cut any material with a diameter larger than
3/4". The tool may stall or kickback, causing a risk of
injury.
• Always turn o the tool between cuts or when
transporting from one location to another. Do not
carry tool with î‚¿nger on the trigger. Accidental starting
can cause serious personal injury.
• Before setting down the tool, turn the switch o,
ensure the blade has stopped, and remove the
battery pack.
• Keep tool clean of trimmings and debris.
• Always remove the battery pack when tool is not
in use.
•Never use a hose to clean the tool. Keep handles
dry, clean, and free from debris. See "Maintenance"
for cleaning instructions.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
î‚¿lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
No Load Strokes per Minute (SPM)
Safety Alert Symbol
Read Operator's Manual
Always wear eye protection, hearing
protection, and protective clothing
and footwear.
Always wear gloves and personal
protective equipment.
Keep hands, feet, and body away
from blade.
Do not use in rain or wet locations.
Keep bystanders 15' away during use
.
C US
UL Listing for Canada and U.S.

Product specificaties

Merk: Milwaukee
Categorie: Grastrimmer
Model: 2726-20

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee 2726-20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Grastrimmer Milwaukee

Milwaukee

Milwaukee M18 Fuel 2725-21HD Handleiding

2 Mei 2023
Milwaukee

Milwaukee 2725-20 Handleiding

11 April 2023
Milwaukee

Milwaukee M18 2828-21 Handleiding

8 Februari 2023
Milwaukee

Milwaukee 2726-20 Handleiding

25 Oktober 2022

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer

Worx

Worx WG185E Handleiding

26 April 2024
Worx

Worx WG157E Handleiding

26 April 2024
Worx

Worx WG183E Handleiding

17 April 2024
Worx

Worx WG119E Handleiding

17 April 2024
Shindaiwa

Shindaiwa T236TS Handleiding

11 April 2024
Fieldmann

Fieldmann FZS 2107-E Handleiding

11 April 2024
Shindaiwa

Shindaiwa B45 Handleiding

11 April 2024
Shindaiwa

Shindaiwa B45LA Handleiding

11 April 2024
Grizzly

Grizzly ERT 3525 Handleiding

27 Maart 2024
Draper

Draper GTP34 Handleiding

27 Maart 2024