Midea MSFAC100D4WC Handleiding
Pagina's 2 Ventilator
Bekijk de handleiding van Midea MSFAC100D4WC gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
PRODUCT SET-UP
OPERATION INSTRUCTIONS
CAUTION
Read Rules for Safe Operation and Instructions
Carefully.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance. Never insert fingers,
pencils, or any other object through the grille when
fan is running.
Disconnect fan when moving from one location to
another.
Be sure fan is on a stable surface when operating to
avoid overturning.
This appliance is for household use only.
CAUTION: To Reduce The Risk Of Electric Shock,
Connect Only To An Outlet Provided With A Ground
Fault Circuit Interrupting Device.
●
●
●
●
●
●
●
It is forbidden to operate with wet hands to avoid
electric shock.
If the unit is not in use for a long time, unplug the
power cord.
To prevent accidental injury or damage to the unit,
please do not insert any foreign matter into the air
inlet and outlet, because the unit incorporates a
high-speed wind rotor. It is prohibited to use this unit
in environments with flammable and explosive gases
and direct sunlight for a long period shall be avoided.
Do not place this unit in an inclined or other uneven
place to prevent the unit from falling and causing
damage to the unit or internal parts.
At any time, the water level in the tank shall not
exceed “MAX” (maximum) scale, and during
humidification, the total water level in the tank shall
be controlled, and shall not be below “MIN”
(minimum) scale.
After the water tank is filled with water, do not tilt or
collide with the unit when placing or moving it. To
move the unit body, please drive it slowly from the
side to prevent water overflow.In using the unit,
prohibit overturning to avoid any accident. If the unit
topples over accidentally, and it contains water,
unplug the power cord immediately and take it to
repair store.
Do not place items on the unit, and covering the
outlet is strictly prohibited.
When wash the unit appearance, apply a damp cloth
(or add a little cleaning agent) to wipe, and never use
corrosive cleaning agent or solvent for cleaning.
Never rinse the unit with water.
Do not have the air inlet and outlet of the unit close
to walls, curtains and other objects, or they may
block the airflow and affect air supply.
When the unit is running, do not knock at or shock
the unit body forcibly or it may lead to automatic
shutdown, in which case simply restart the unit.
●
●
●
●
●
●
●
●
●
In summer, the water in the tank may easily
deteriorate and generate odor, please pay attention
to regular change of water; if the indoor
temperature is below zero in winter humidification,
it is best to use warm water for humidification.
Do not place the unit directly below the power
outlet.
Do not use the unit around the tub, sprinkler or
swimming pool.
Product repair must be carried out in a designated
agency.
To protect against the risk of electrical shock, do
not immerse the unit, cord or plug in water or other
liquid.
Use a soft cloth moisten with mild soap, and then
use a dry cloth to wipe it again.
Be aware that high humidity levels may encourage
the growth of biological organisms in the
Environment.
Do not permit the area around the fan to become
damp or wet. If dampness occurs, turn the output of
down. If the fan output volume cannot be turned
down, use the fan intermittently. Do not allow
absorbent materials, such as carpeting, curtains,
drapes, or tablecloths, to become damp.
●
●
●
●
●
●
●
●
This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to defeat this
safety feature.
WARNING—To reduce the risk of fire or electric
shock, do not use this fan with any solid-state speed
control device.
Do not leave the fan running unattended.
To Reduce The Risk Of Fire, Electric Shock Or Injury
To Persons, Do Not Use Replacement Parts That
Have Not Been Recommended By The Manufacturer
(e.g.Parts Made At Home Using A 3D Printer).
Do not operate any fan with a damaged cord or plug.
Discard fan or return to an authorized service facility
for examination and/or repair.
Do not run cord under carpeting. Do not cover cord
with throw rugs, runners, or similar coverings. Do not
route cord under furniture or appliances. Arrange
cord away from traffic area and where it will not be
tripped over.
The fan shall not be modified by the user in any
manner, such as by adding supplemental filters to the
fan not intended to be used for air cleaning purposes.
WARNING:To reduce the risk of electric shock, do
not perform any serving other than that contained in
the operating instructions unless you are qualified to
do so.
Unplug or disconnect the appliance from the power
supply before servicing and whenever the machine is
left operating and unattended.
The fan body shall not be disassembled/opened to
clean the fan blade. Wipe the fan body with a slightly
damp cloth to clean.
Non-specialized personnel or unauthorized repair
personnel shall not to repair or modify the machine.
●
●
●
●
●
●
●
●
●
●
●
●
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly
qualitied persons in order to avoid a hazard.
To protect against the risk of electrical shock, do not
immerse the unit, cord or plug in water or other liguid.
When the appliance is not in use and before cleaning,
unplug the appliance from the outlet.
●
●
●
WARNING
IMPORTANT SAFEGUARDS
READ AND SAVE THESE
INSTRUCTIONS
CLEANING AND
MAINTENANCE
1. Tum off the power supply before cleaning this product. Turn off the
machine for two minutes before cleaning.
2. After cleaning and maintenance, be sure to wait until it is fully dry
before powering on for use or storage.
3. Do not rinse the body directly with water. Use a soft cloth containing
a little neutral detergent to gently wipe the surface, and then wipe it
dry. Do not use solvents such as gasoline.
4. It is prohibited to disassemble the product for modification. It is
recommended that this product be inspected and cleaned regularly to
extend its service life.
5. To prevent scale accumulation from affecting the life, please clean it
once every 3-7 days depending on the water quality in the area where
it is used and the frequency of use.
Component Name
How To Use Ice Box
Additional Functions
Battery Installation(Battery not included)
Remote Control
Base Installation
Water Tank Filling Guide
Water Tank Cleaning Instructions
Warning notices: Before using this product, please read this manual
carefully and keep it for future reference. The design and specifications are
subject to change without prior notice for product improvement. Consult
with your dealer or manufacturer for details. The diagram above is just for
reference. Please take the appearance of the actual product as the
standard.
NOTE
Before disassembling and cleaning the water tank, please unplug the power plug.
NOTE
Please place the device on a soft surface during set-up to prevent any scratches.
NOTE
1. To ensure product performance, please use purified water.
2. Please clean up the water at the bottom of the water tank promptly when it is
idle.
3. Unplug the power plug when filling and cleaning.
4. Before starting the machine, make sure that the water pump module is fixed in
place. Arbitrary placement of the water pump module may cause abnormal
humidification.
5. How to add water: Completely pull out the water tank, add water or clean the
water tank.
NOTE
1. The ice box can be refrozen and reused; you can also choose not to use it
depending on the temperature.
2. Do not open the ice box cover to prevent damage and leakage.
3. Close attention is required especially when used by or near children and do not
eat.
4. The ice box is made of environmentally friendly materials, non-toxic and
harmless, and can be safely placed in the refrigerator.
5. When the frozen ice box is placed in the water tank, the temperature of the air
outlet will drop after turning on the cooling air.
6. Ice box freezing can be replaced by ice cubes, which also have a cooling effect.
When adding water, the water level in the water tank should be controlled not
to exceed the "max" (highest) mark. If the water level is lower than the "min"
(lowest) mark, please add water in time.
1.
Open the water tank
buckle to a horizontal
position.
1. Take out the ice box from the
packaging box and put it in the
refrigerator for at least 3 hours.
2.
Completely pull out
the water tank, place
it on a stable surface,
and add water.
3.
After adding water,
push the water tank
into the body.
3.
Turn the knob by hand
(90° counterclockwise) to
separate the water tank and
water pump module (containing
water pipe).
4.
Clean the water pump at the
location shown in the figure. (It is
recommended to clean it once
every 3 months to extend its
service life.)
5.
After adding water or cleaning
the water tank, install the water
pump module into the tank,
insert the front hook into the
water tank slot, rotate the slotted
knob 90° clockwise, and lock it as
shown in the figure
6.
Slowly push in the water tank and
turn the water tank buckle to lock
the tank.
Water pump
module
Slotted knob
(separated
state)
Slotted knob
Front hook
Operation panel
Remote control
receiving hole
Air outlet
Body
Water tank gauge
Base
Ice box x2
Screw x6
Remote control x1
1. Take out the two parts of the base from the packaging box, align the
centers of the two bases and place them crosswise, then rotate one of
the bases to align the holes and lock it in place.
2. Align the clamping line of the body with the clamping line of the base,
press the body firmly into the base, and fix it with screws at the base
mark.
Auto Display Shutoff
The display will automatically shut off after 30 secs of uninterrupted use.
Press any button to wake up the display.
24-Hour Auto Shutdown Feature
This fan incorporates a 24-hour auto shutdown feature for energy
conservation. If the fan runs continuously for 24 hours without any
operation, it will automatically enter standby mode
•Aim the remote toward the fan and press
the desired button. The remote will work
at a distance within 15ft of the unit, and
within 30 degrees to the left and right of
the control panel.
•Before the remote control is scrapped, the
batteries must be removed and disposed
of safely.
•Both machine body operation" " and
remote control " "are buttons of wind
type.
•Both machine body operation " "and
remote control " " are buttons of cool
wind.
• Remove the battery compartment cover by sliding with fingers.
• Insert Qty. 2 AAA batteries, and make sure the batteries are placed
as shown (Figure 2).
• Install battery compartment cover by sliding the cover in the
direction shown (Figure 2.)
Screw hole
Fix the four
screws on the
base
Fix the four
screws on the
base
Freeze for at least 3 hours
ButtonFunction Description
ON/STANDBY
• Press this button to power the unit ON/STANDBY.
OSC/Drying
• Press this button to turn oscillation On/Off.
• Press and hold for 3 seconds to turn on/off the wet curtain air drying
function, and the wet curtain air drying indicator light will turn on/off.
After this function is enabled, the machine will run for 25 minutes and
then automatically shutdown.
Cooling
• Shortly press to open or close cool wind under start up state.
The experience effect is better, when opening the cool wind function
in dried or hot weather.
• In humidification mode, the humidifying light is always on. If the
water tank is empty, the humidifying light will go off and the water
shortage light will remain on.
Timer
• You can select the length of time the fan will be in operation from
spans ranging from 1 to 7 hours in 1-hour increments. Press the
TIMER button repeatedly, and the sum of the values of the lights is
the remaining time until shut down.
Please aim the
remote control
at the Remote
control receiving
hole to use it.
Figure 1
ButtonFunction Description
ON/STANDBY
• Press this button to power the unit ON/STANDBY.
OSC
• Press this button to turn oscillation On/Off.
Timer
• Press this button repeatably to set the amount of
time (in 1 hr increments) the device will
automatically shutdown.
Mode
• Press this button to select between three distinct
wind modes (normal, natural, and sleep).
Increase +/Decrease - Button
• Press the “+” or “-” button repeatedly to increase or
decrease the fan speed.
• In timer mode, press the “+” or “-” button
repeatedly to adjust the timer duration.
Cooling
• Press this button to turn Cooling air On/Off.
AAA Battery. 1.5V
Battery
3. The ice box can be repeatedly
frozen and reused; you can also
choose not to use it according to
the temperature.
1.
Open the water tank buckle to
a horizontal position.
2.
Completely pull out the water
tank, place it on a stable surface,
and add water.
2. Pull out the water tank from the
bottom of the machine and put
the frozen ice box into the water
tank. Do not add water beyond
the "max" indication mark.
Water tank mark
SPECIFICATIONS
Product Model
Voltage
Frequency
Current
MSFAC100D4WC
120V~
60Hz
0.8A
SPEED
• In Normal mode , press this button to select the fan speed
(1 - Lowest through 6-Highest).
• In Natural and Sleep mode, the fan speed is not adjustable by the user.
• The effect of the wind speed indicator is as follows:
Gear1: Gear 2: Gear 3: Gear 4: +
Gear 5: + Gear 6: + +
Mode
• Press this button to select between three distinct wind modes (Normal,
Natural and Sleep).
• Natural mode mimics a natural breeze by automatically changing
the fan speed at regular intervals.
• In sleep mode, fan speed automatically decreases.
• The remote control uses AAA manganese batteries or alkaline batteries.
• Do not use rechargeable batteries.
• Non-rechargeable batteries are not to be recharged.
• Batteries are to be inserted with the correct polarity. Exhausted batteries are
to be removed from the appliance and safely disposed of.
• If the appliance is to be stored unused for a long period, the batteries are
removed, the supply terminals are not to be short-circuited.
• Do not put the remote-control battery into re, or the battery may explode or
leak.
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium) batteries.
TROUBLESHOOTING
Use the following table to troubleshoot any issues with your device.
Cause SolutionProblem
• Make sure the plug is
properly inserted into the
receptacle.
• Replace the battery.
• The power cord is not
plugged in or has poor
contact with the receptacle.
• The battery needs replacing.
The device does
not work properly
after installation
The remote does
not work
• The remote is being used
more than 15 ft. away from
the device.
• Use the remote closer to the
device and make sure it is
pointing directly at the
control panel.
Scan this QR code for details:
Product Information, Warranty & Customer Service
Support, Legal Statements (Trademarks, Copyrights,
Data Protection).
* Midea reserves the right of final interpretation
Figure 2
1 YEAR LIMITED WARRANTY
Midea America (Canada) Crop. makes nour ftherwarran tis eopr rereenstations, e xpss reor
implied expt tcehose containeheren.d i Norere psentaetiv o dreaerauhorl is tized to
assume ny aoather libility rearhegding t
product
. T dheuratid tyon of t impliheewarran
granted under State l iaw,nclundig tis warraneof merchantability and fitneorarss f pticuarl
purpose ar limitd ieen d s duraontihouheld turaonhereti of t expss warranranty gt it
hereundr. eMidea America (Canada) Crop. shanoll in evaent be liblet,n for direc idirect,
special or consequentiaamages.l d
on your product).
Midea America (Canada) Crop. warrants as limited herein to the original purchaser of
retail that each new product, shall be free of defects in material and workmanship for
a period of one (1) year from the date of delivery. This one (1) year warranty is limited
to the Motor and Electric Element. The date of delivery establishes the warranty
period, should service be required.
In the evet of mnalftis unconorure fail oproduct,f your simply d seeliver ornd the
product,o pstagpaid e prealong wh PP whin itROOF OF URCHASE,it thewarranty of
one(1) y to ear,Midea America (Canada) Crop.. Midea America (Canada) Crop. reserves
t ncheright to ispet the claeefeimd dectiv parorart pts to deternehemi if t defecort
malfunctiono cmplaint is d by tcoverehis warranty. Midea America (Canada) Crop. shall,
within sixty (6) d0ays a fterreceipt odf the prouct, ao t its ption,repair dan/orreacehe pl t
defective part or pts farree of chare.Thg is warranhaoncoty sll ly ver defecarrots ising fm
normal sague. Midea America (Canada) Crop. assumes spnore onsavbility tswhaoeer if
tproductrin he shld fail duoug thewarranerreaty piod by son of:
Midea America (Canada) Corp.
Unit 108, 15 Allstate Parkway, Markham ON L3R 5B4
TEL1-888-365-2230：
CONSIGNES DE SÉCURITÉ
IMPORTANTES LIRE
ET CONSERVER CES
INSTRUCTIONS
MISE EN GARDE
• Lire attentivement les règles et les consignes relatives
à la sécurité d'utilisation.
• Cet appareil n’est pas destiné à être utilisé par des
personnes (y compris des enfants) dont les capacités
physiques, sensorielles ou mentales sont réduites, ou
qui manquent d’expérience ou de connaissances, à
moins qu’elles n’aient bénéficié d’une surveillance ou
d’instructions concernant l’utilisation de l’appareil,
dispensées par une personne responsable de leur
sécurité.
• Les enfants doivent être surveillés pour s'assurer qu'ils
ne jouent pas avec l'appareil. N’insérez jamais vos
doigts, des crayons ou tout autre objet à travers la
grille lorsque le ventilateur est en marche.
• Débranchez le ventilateur avant de le déplacer d’un
endroit à un autre.
• Assurez-vous que le ventilateur est posé sur une
surface stable pendant son fonctionnement pour
éviter qu’il ne se renverse.
• Cet appareil est destiné à un usage domestique
uniquement.
•
électrique, branchez uniquement sur une prise
équipée d’un dispositif de protection contre les
défauts à la terre.
AVERTISSEMENT
• Si le cordon d’alimentation est endommagé, il doit
être remplacé par le fabricant, son agent de service
ou par des personnes possédant des qualifications
équivalentes afin d’éviter tout danger.
• Pour vous protéger contre le risque de décharge
prise dans l’eau ou tout autre liquide.
• Lorsque l'appareil n'est pas utilisé et avant de le
nettoyer, le débrancher de la prise.
• Cet appareil est équipé d’une fiche polarisée (une
lame est plus large que l’autre). Pour réduire le risque
de décharge électrique, cette fiche est conçue pour
ne s’insérer dans une prise polarisée que dans un seul
sens. Si la fiche ne s’insère pas complètement dans
la prise, inversez-la. Si cela ne convient toujours pas,
contactez un électricien qualifié. Ne tenz pas de te
neutraliser cette fonction de sécurité.
• AVERTISSEMENT — Pour réduire le risque d’incendie
ou le risque de décharge électrique, n’utilisez pas ce
ventilateur avec un dispositif de commande de vitesse
à semi-conducteurs.
• Ne laissez pas le ventilateur fonctionner sans
surveillance.
• Pour réduire le risque d'incendie, de décharge
électrique ou de blessure, n'utilisez pas de pièces
de rechange qui n'ont pas été recommandées par
le fabricant (par exemple, des pièces fabriquées à la
maison à l'aide d'une imprimante 3D).
• Ne faites pas fonctionner un ventilateur dont le
cordon ou la fiche sont endommagés.
• Jez le ventilateur ou rapporz-le à un centre de tete
service agréé pour examen et/ou réparation.
• Ne faites pas passer le cordon sous la moquette. Ne
recouvrez pas le cordon avec des carpettes, des tapis
de couloir ou des revêtements similaires. Ne faites pas
passer le cordon sous des meubles ou des appareils.
Plaz le cordon à l’écart des zones de passage et ce
dans un endroit où il ne pourra pas être une source de
trébuchement.
• L’utilisateur ne doit en aucun cas modifier le
ventilateur, par exemple en y ajoutant des filtres
supplémentaires qui ne sont pas prévus pour la
purification de l’ai
r.
•
électrique, ne réalisez aucune intervention autre que
celles contenues dans les consignes d’utilisation, sauf
si vous êtes qualifié pour le faire.
• Débranchez ou déconnectez l’appareil de
l’alimentation électrique avant toute intervention
et chaque fois que la machine fonctionne sans
surveillance.
• Le corps du ventilateur ne doit pas être démonté/
ouvert pour netter la pale du ventilateur. Essuyez oy
le corps du ventilateur avec un chiffon légèrement
humide pour le netter.oy
• Le personnel non spécialisé ou le personnel de
réparation non torisé doit pas réparer ni modifier aune
la machine. Il est interdit de manipuler avec les
mains mouillées afin d’éviter tout risque de décharge
électrique.
• Si l’unité n’est pas utilisée pendant une longue
période, débranchez le cordon d’alimentation.
• Pour éviter tout risque de blessure accidentelle ou
d’endommagement de l’appareil, veuillez ne pas
insérer d’objet étranger dans l’entrée ou la sortie
d’air, car celui-ci intègre un rotor à vent à grande
vitesse. Il est interdit d’utiliser cette unité dans des
environnements contenant des gaz inflammables
et explosifs, et il convient d’éviter une exposition
prolongée à la lumière directe du soleil.
• Ne placez pas cette unité dans un endroit incliné
ou autre surface bosselée afin d’éviter que l’unité
ne tombe et s'endommage ou n'endommage ses
composants internes.
• À tout moment, le niveau d'eau dans le réservoir ne
doit pas dépasser l'échelle « MAX » (maximum), et
pendant l'humidification, le niveau total d'eau dans
le réservoir doit être contrôlé et ne doit pas être
inférieur à l'échelle «MIN» (minimum).
• Après avoir rempli le réservoir d'eau, n'inclinez pas
ni ne heurtez l'appareil lors de son placement ou de
son déplacement. Pour déplacer le corps de l’unité,
veuillez la pousser lentement par le côté afin d’éviter
trout débodement d’eau. Lors de l’utilistion de l’uniaté,
il et insterrenverrn’étdit de la se afi dvier toccnt. ut aide
Si l’appareil bascule accidentellement et contient
de l’eau, débranchez immédiatement le cordon
d’alimentation et apporz-le au centre de réparation.te
• Ne placez pas d’objets sur l’appareil, et il est
strictement interdit de couvrir la sortie d’air.
• Lors du nettoyage de l’apparence de l’unité, utilisez
un chiffon humide (ou ajoutez un peu de produit
nettoyant) pour essuyer, et n’utilisez jamais de produit
corrosif ou de solvant pour le nettoyage. Ne rincez
jamais l’appareil à l’eau.
• Ne placez pas l'entrée et la sortie d'air de l'unité
près des murs, des rideaux ou d'autres objets,
car ils pourraient bloquer le flux d'air et affecter
l'alimentation en air.
• Lorsque l’unité fonctionne, ne frappez pas ni ne
secouez violemment le boîtier de l’unité, car cela
pourrait entraîner un arrêt automatique ; dans ce cas,
il suffit de redémarrer celle-ci.
• En été, l'eau dans le réservoir peut facilement se
détériorer et générer des odeurs, veuillez faire
attention à changer régulièrement l'eau ; si la
température intérieure est inférieure à zéro en hiver
lors de l'humidification, il est préférable d'utiliser de
l'eau tiède pour l'humidification.
• Ne placez pas l’unité directement sous la prise
électrique.
630 mm
435 mm
Product specificaties
| Merk: | Midea |
| Categorie: | Ventilator |
| Model: | MSFAC100D4WC |
Heb je hulp nodig?
Als je hulp nodig hebt met Midea MSFAC100D4WC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden