Middle Atlantic TOR-PRT Handleiding


Pagina's 2 Niet gecategoriseerd

Bekijk de handleiding van Middle Atlantic TOR-PRT gratis online of download de PDF. 3 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

TOR SERIES
TOR-PRT Partial Recess Trim Kit
For Tilt Out Wall rack
Instruction Sheet
I-00107 Rev D
U
L
R
C US
TOOLS REQUIRED
# 2 Phillips Driver
NOTE: The trim provides aesthetic improvements
when used on partially recessed applications.
BACKPAN
FASCIA
ASSEMBLY
The assembly should coincide with initial installation of the product. (Instruction Sheet I-00106)
NOTE: The flange from the faceplate should be removed. Take out the six (6) screws from the
back of the faceplate and remove.
FIGURE A
1) Place the fascia on the backpan and slide on the backpan until it is flush with the wall.
(fascia will be sandwiched between the side of backpan and the wall stud)
2) Install the six (6) customer supplied mounting screws through the backpan side and fascia,
do not tighten. (FIGURE A)
3) While pressing on the fascia face until it’s completely flush with the wall, tighten the mounting
screws.
TIP: Tighten the alternate corners first, followed by the center screws.

Beoordeel deze handleiding


Product specificaties

Merk: Middle Atlantic
Categorie: Niet gecategoriseerd
Model: TOR-PRT
Kleur van het product: Wit
Breedte: 678.2 mm
Diepte: 66.8 mm
Hoogte: 797.6 mm
Gewicht verpakking: 23590 g
Soort: Sierpaneel
Maximale gewichtscapaciteit: 45.36 kg
Aantal per verpakking: 1 stuk(s)
Compatibiliteit: TOR
Code geharmoniseerd systeem (HS): 85389099

Heb je hulp nodig?

Als je hulp nodig hebt met Middle Atlantic TOR-PRT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden