Middle Atlantic WMRK-Z4 Handleiding
Middle Atlantic
Niet gecategoriseerd
WMRK-Z4
Bekijk gratis de handleiding van Middle Atlantic WMRK-Z4 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 111 mensen en kreeg gemiddeld 4.4 sterren uit 56 reviews. Heb je een vraag over Middle Atlantic WMRK-Z4 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
I-00373 Rev C
SHOWN: WMRK Inside Corner
The FLOOR MOUNTING HARDWARE is supplied by the Installer and approved by the Field Engineer
who will rate the entire job.
Four (4) 1/2” Anchor Bolts are required.
Includes four (4) brackets and three (3)
ARRHK hardware kits containing eight (8)
oval nuts and eight (8) bolts each.
INSTALLATION
Install as shown.
NOTE: The leveling foot rivnut located in the corner
does not need to be removed. Tighten the floor
anchor completely. Deflection will occur around the
rivnut. This is required, it pre-loads the corner in
compression.
SEISMIC BRACKET
(One in each corner of the WMRK)
- OR -
HARDWARE
Page 2
The REMOVABLE KNOCKOUT PLATE (BOTTOM) must NOT be removed for seismic certification to stay in
effect (may differ based on enclosure). Enclosure must be plumb and level in 2 directions.
REMOVABLE
KNOCKOUT
PLATE
(DO NOT REMOVE)
TYPICAL
CORNER
OF WMRK
The Seismic Bracket must be snug
against the rack sides
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ATTENTION
IMPORTANT NOTE
Page 3
SEISMIC COMPLIANCE RACKRAIL MOUNTING
1. Middle Atlantic Products seismic certifications require that Rackrail/Z-Rail be mounted in the slide position
and fixed positions of all mounting points. (below)
2. Install Rack Panels in all unused rack spaces using all available mounting points.
ADDITIONAL
HARDWARE
INCLUDED IN KIT
STANDARD RAIL
HARDWARE
(FROM FACTORY)
An engineered system is vital to achieve seismic rating requirements. A licensed professional
engineer must approve the type of fasteners for the flooring where the rack will be mounted.
Braced according to specifications set forth by licensed Architects and Engineers, the Middle
Atlantic Products rack you purchased is capable of sustaining a phenomenal lateral load with
the front rails filled to maximum capacity.
SEISMIC COMPLIANCE
FASTEN RACK SCREWS SECURELY
Product specificaties
| Merk: | Middle Atlantic |
| Categorie: | Niet gecategoriseerd |
| Model: | WMRK-Z4 |
Heb je hulp nodig?
Als je hulp nodig hebt met Middle Atlantic WMRK-Z4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Middle Atlantic
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
24 Mei 2025
14 Mei 2025
6 Mei 2025
Handleiding Niet gecategoriseerd
- KONFTEL
- AmpliVox
- N8WERK
- KEMIMOTO
- Bebe Confort
- Basetech
- Beltronics
- ESUN
- Junkers
- OpenVox
- Nite Ize
- Steelbody
- Dorman
- Ubiquiti Networks
- Ultimate Speed
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025