Middle Atlantic SRB-2-WRK-3224 Handleiding

Bekijk gratis de handleiding van Middle Atlantic SRB-2-WRK-3224 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over Middle Atlantic SRB-2-WRK-3224 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SRB SERIES

SEISMIC CERTIFIED RISER BASES

Instruction Sheet

I-00146 Rev D

INSTALLATION

1) Secure SRB to floor using customer

supplied hardware (certified by the

professional engineer)

(FIGURE A)

2) Place enclosures on SRB. Secure them

to the riser base using seismic brackets in

4 places (see part number chart below) and

certified hardware specified by the Professional

Engineer (FIGURE A)

SEISMIC

BRACKET

SEISMIC

BRACKET

An engineered system is vital to achieve seismic rating requirements. A licensed professional

engineer must approve the type of fasteners for the flooring where the rack will be mounted.

Braced according to specifications set forth by licensed Architects and Engineers, the Middle

Atlantic Products rack you purchased is capable of sustaining a phenomenal lateral load with

the front rails filled to maximum capacity.

NOTE: When used with ANGLE, raised floors must not be fastened to ANGLE itself

SEISMIC COMPLIANCE

WARNING: A Professional Engineer must specify seismic certified mounting hardware

appropriate to the application. Failure to specify appropriate seismic certified

hardware can result in system failure, damage, and/or personal injury

3) Connect enclosures using appropriate ganging hardware. (FIGURE B)

Ganging Hardware for Racks:

GANG-10 (All Racks)

GANG-10T (BGR Racks Only)

BOND-G24 (Used for Electrical Bonding of Racks)

GANGING

HARDWARE

(FIGURE B)

Product specificaties