Microchip MIC4811 Handleiding

Microchip Niet gecategoriseerd MIC4811

Lees hieronder de 📖 handleiding in het Nederlandse voor Microchip MIC4811 (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
MIC4811
High Current 6 Channel Linear WLED
Driver with DAMâ„¢ and Ultra Fast
PWMâ„¢ Control
Ultra Fast PWM, DAM and Dynamic Average Matching are trademark of Micrel, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
General Description
The MIC4811 is a high efficiency linear White LED
(WLED) driver designed to drive up to six high current
WLEDs for signage lighting. The MIC4811 provides the
highest possible efficiency as this architecture has no
switching losses present in traditional charge pumps or
inductive boost circuits. The MIC4811 provides six linear
drivers which maintain constant current for up to six
WLEDs. It features a typical dropout of 100mV at 50mA.
The MIC4811 features Dynamic Average Matchingâ„¢
(DAMâ„¢) which is specifically designed to provide optimum
matching across all WLEDs. The high accuracy (±1%
typical) current regulated WLED channels ensure uniform
display illumination under all conditions. The brightness is
controlled through an Ultra Fast PWMâ„¢ interface
operating down to less than 1% duty cycle.
The MIC4811 is available in an 10-pin MSOP package
with a junction temperature range of -40° °C to +125 C.
Datasheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Features
• High Efficiency (no Voltage Boost losses)
• Ultra Fast PWM™ control (200Hz to 500kHz)
• Input voltage range: 3.0V to 5.5V
• LED current range up to 50mA per channel
• Programmable LED current with external resistor
• Dropout of 100mV at 50mA
• Matching better than ±1% (typical)
• Current Accuracy better than ±1% (typical)
• Maintains proper regulation regardless of how many
channels are utilized
• 10-pin MSOP package
Applications
• Billboard displays
• Marquee displays
• Instrument displays
• LCD display modules
____________________________________________________________________________________________________________
Typical Application
High Current Lighting (Six WLEDs)
April 2011 M9999-041411-B
Micrel Inc. MIC4811
April 2011 2 M9999-041411-B
Ordering Information
Part Number Mark Code(1) Junction Temperature Range Package
MIC4811YMM 4811 –40°C to +125°C 10-Pin MSOP
Pin Configuration
10-Pin MSOP (MM)
(Top View)
Pin Description
Pin Number Pin Name Pin Function
1 VIN Voltage Input. Connect at least 2.2µF ceramic capacitor between VIN and GND.
2 EN Enable LED drivers. This pin can be used as a PWM input for dimming of WLEDs. Do not leave
floating.
3 RSET An internal 1.27V reference sets the nominal maximum WLED current. Example, apply a 16.5kΩ
resistor between RSET and GND to set LED current to 50mA at 100% duty cycle.
4 GND Ground.
5 D6 LED6 driver input. Connect LED anode to VIN and cathode to this pin.
6 D5 LED5 driver input. Connect LED anode to VIN and cathode to this pin.
7 D4 LED4 driver input. Connect LED anode to VIN and cathode to this pin.
8 D3 LED3 driver input. Connect LED anode to VIN and cathode to this pin.
9 D2 LED2 driver input. Connect LED anode to VIN and cathode to this pin.
10 D1 LED1 driver input. Connect LED anode to VIN and cathode to this pin.
Micrel Inc. MIC4811
April 2011 3 M9999-041411-B
Absolute Maximum Ratings(1)
Main Input Voltage (VIN) .................................. –0.3V to +6V
Enable Input Voltage (VEN).............................. –0.3V to +6V
LED Driver Voltage (VD1-D6) ............................ –0.3V to +6V
Power Dissipation .....................................Internally Limited
Lead Temperature (soldering, 10sec.)....................... 260°C
Storage Temperature (Ts) .........................–65°C to +150°C
ESD Rating(3)............................................................... 1.5kV
Operating Ratings(2)
Supply Voltage (VIN)..................................... +3.0V to +5.5V
Enable Input Voltage (VEN) .................................... 0V to V
IN
LED Driver Voltage (VD1-D6) ................................... 0V to VIN
Junction Temperature (TJ) ........................ –40°C to +125°C
Junction Thermal Resistance
MSOP-10L (θJA)............................................130.5°C/W
Electrical Characteristics
VIN = VEN = 5V, RSET = 16.5kΩ; VD1-D6 = 1.2V; TJ = 25° °C, bold values indicate –40 C ≤ T J ≤ 125°C; unless noted.
Parameter Conditions Min Typ Max Units
Current Accuracy(4) 47.5 50 52.5 mA
Matching(5) 1 3.6 %
Drop-out Where ILED = 90% of LED current seen at
VDROPNOM = 1.2V, 100% brightness level 100 180 mV
Ground/Supply Bias Current 1.7 2.2 mA
Shutdown Current VEN = 0V 0.01 1 µA
PWM Dimming
Logic Low 0.2 V Enable Input Voltage (V
EN)
Logic High 1.2 V
Enable Input Current VIH > 1.2V 0.01 1 µA
Current Source Delay
(50% levels)
Shutdown to on
Standby to on
On to Standby
40
1
0.3
60 µs
µs
µs
Current Source Transient Time
(10%-90%)
TRISE
TFALL
1
0.3
µs
µs
Stand-by to Shutdown Time VEN = 0V 10 20 40 ms
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. Devices are ESD sensitive. Handling precautions recommended. Human body model, 1.5kΩ in series with 100pF.
4. As determined by average current of all channels in use and all channels loaded.
5. The current through each LED meets the stated limits from the average current of all LEDs.

Product specificaties

Merk: Microchip
Categorie: Niet gecategoriseerd
Model: MIC4811

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip MIC4811 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Microchip

Microchip

Microchip AT32UC3A3256 Handleiding

10 April 2024
Microchip

Microchip AT32UC3A364 Handleiding

10 April 2024
Microchip

Microchip AT32UC3B0256 Handleiding

10 April 2024
Microchip

Microchip AT32UC3A0512 Handleiding

10 April 2024
Microchip

Microchip AR1010 Handleiding

10 April 2024
Microchip

Microchip AT32UC3C0256C Handleiding

10 April 2024
Microchip

Microchip AT32UC3A364S Handleiding

10 April 2024
Microchip

Microchip AT32UC3C1256C Handleiding

10 April 2024
Microchip

Microchip AT32UC3A1128 Handleiding

10 April 2024
Microchip

Microchip AR1100BRD Handleiding

10 April 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024