Metra 99-9014HG Handleiding

Metra Carkit 99-9014HG

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-9014HG (8 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 10/10/19 INST99-9014HG
I N S TA L L AT I O N I N S T R U C T I O N S
99-9014HG
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
ISO DIN radio provision
ISO DDIN radio provision †
Pioneer modular DDIN radio provision †
Painted high gloss black to match the factory finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Support bracket • D) Blank panel • E) #4 x 3/8” Phillips pan-head screws (6)
• F) #8 x 3/8” Phillips truss-head screws (2) • G) #8 x 1/2” Phillips truss-head screws (4) • H) Panel clips (2) • I) Panel clip mounts (2) TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Cutting tool • T-20 Torx driver
• VW radio removal tool (Metra part #86-9001)
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation .......................................................4
Kit Assembly
–ISO DIN radio provision .......................................5
–ISO DDIN radio provision .....................................6
–Pioneer modular DDIN radio provision .............7
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: AXTC-VW2
Antenna Adapter: 40-EU56-36
A B
F G
C D E
Volkswagen Jetta 2019-Up
H I
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
† Only for with ISO DDIN radios which have an “L” shaped chassis design, with the radio chassis at the
top of the screen. At present only the Sony XAV-AX100, XAV-AX200, and XAV-AX5000 radios have this
design. The Pioneer modular radios, DMH-C2550NEX and DMH-C2500NEX, can also be used.
1.800.221.0932
|
MetraOnline.com
2
1. Open the driver’s door, then unclip
and remove the dashboard side panel.
(Figure A)
2. Unclip and remove the trim panel
directly below the far left a/c vent.
Remove (1) T-20 Torx screw exposed.
(Figure B)
3. Unclip and remove the trim panel to the
left of the steering column. (Figure C)
4. Unclip and remove the trim panel
directly below the far right a/c vent.
Remove (2) T-20 Torx screws exposed.
(Figure D)
5. Unclip and remove the far right a/c vent.
(Figure E)
Continued on the next page
(Figure E)
(Figure D)
DASH DISASSEMBLY
(Figure A)
(Figure B)
(Figure C)
REV. 10/10/2019 INST99-9014HG 3
DASH DISASSEMBLY (CONT.)
6. Unclip and remove the trim panel above
the glove box. Remove (3) T-20 Torx
screws exposed, securing the radio &
instrument trim panel. (Figure F,G)
7. Unclip the top of the steering column
shroud. The shroud is connected to the
radio & instrument-cluster trim panel by
a piece of material and will be removed
fully in the following step. (Figure H)
8. Unclip and remove the radio &
instrument-cluster trim panel, including
the shroud loosened in the prior step.
(Figure I)
9. Using radio removal keys (sold
separately), release the radio. Slide the
radio out, then unplug and remove.
Remove (2) metal clips attached to
the sides of the radio for re-use in Kit
Preparation. (Figure J)
This is just the display for the Note:
radio. The radio brain is located above
the glove-box.
Continue to Kit Preparation
(Figure F)
(Figure G)
(Figure H)
(Figure I)
(Figure J)
Use this end of the
radio removal key


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 99-9014HG

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-9014HG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Handleiding Carkit

Nieuwste handleidingen voor Carkit