Metra 99-8725B Handleiding


Bekijk gratis de handleiding van Metra 99-8725B (9 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 72 mensen en kreeg gemiddeld 3.7 sterren uit 36.5 reviews. Heb je een vraag over Metra 99-8725B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/9
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.
®
MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 3/15/18 INST99-8725B
INSTALLATION INSTRUCTIONS
99-8725B
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
Includes parts to relocate the hazard switch panel
Painted matte black
KIT COMPONENTS
A) Radio trim panel B) Radio brackets C) Hazard switch housing D) Hazard switch bracket E) Hazard switch housing spacer F) Pocket
G) (12) #8 x 3/8” Phillips screws H) (1) #8 x 1 Phillips screw
TOOLS REQUIRED
Panel removal tool Phillips screwdriver
Torx T20 screwdriver Cutting tool
TABLE OF CONTENTS
Dash Disassembly...............................................2-3
Kit Preparation ................................................... 4-5
Kit Assembly
–ISO DIN radio provision with pocket ..................6
–ISO DIN radio provision with pocket .................. 7
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: TBA
Antenna Adapter: 40-EU56
Steering wheel control interface: ASWC-1
A B C D
F
E
Mercedes C Class 2012-2015
G H
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
Radio removal
1. Unclip, unplug, and remove the
dashboard trim panel above the radio.
This panel also includes the center
a/c vents. (Figure A)
2. Unscrew (2) Torx T20 screws on the
top of the radio, just halfway (about a
half inch), then push the screws down
to release the radio. Pull the radio out,
then unplug. (Figure B)
Display screen removal
3. Unclip and remove the lower trim from
the speedometer cluster. (Figure C)
4. Unclip and remove the upper trim from
the speedometer cluster. (Figure D)
Continued on the next page
(Figure A) (Figure C)
(Figure B) (Figure D)


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-8725B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-8725B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden