Metra 99-8265HG Handleiding

Metra Carkit 99-8265HG

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-8265HG (4 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.®MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 11/14/17 INST99-8265HG
I N S TA L L AT I O N I N S T R U C T I O N S
99-8265HG
KIT FEATURES
ISO DIN radio provision with pocket
Painted high gloss black
KIT COMPONENTS
• A) Radio housing trim panel • B) Radio brackets • C) Pocket • D) (4) #6 x 3/8” Phillips screws • D) (2) #8 x 3/8” Phillips screws
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
- ISO DIN radio provision with pocket ..................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-1761
Antenna Adapter: 40-LX10
A B C D E
Toyota C-HR 2018-up*
*Visit for up-to-date vehicle specific applications.MetraOnline.com
1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the trim panel from
around the factory radio, including
the clock. (Figure A)
2. Remove (4) 10mm bolts securing the
radio, then remove it. (Figure B)
Continue to Kit Assembly
(Figure A)
(Figure B)
DASH DISASSEMBLY
REV. 11/1/2017 INST99-8265HG 3
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Attach the
radio brackets
to the
radio
housing trim panel
using the
(4) #6 x 3/8” screws supplied. (Figure A)
2. Mount the
pocket
to the
radio brackets
with the (2) #8 x 3/8” Phillips screws
supplied. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the assembly and
secure with the screws supplied with
the radio. (Figure C)
5. Locate the factory wiring harness and
antenna plug in the dash and make all
necessary wire connections to the radio.
Metra recommends using the proper
mating adapters from Metra and/
or AXXESS. Test the radio for
proper operation.
6. Mount the new radio assembly into
the dash.
7. Reassemble the dash in the reverse
order of disassembly.
(Figure C)(Figure A)
(Figure B)


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 99-8265HG

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-8265HG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Handleiding Carkit

Nieuwste handleidingen voor Carkit