Metra 99-8263HG Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-8263HG (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
REV. 2/20/2017 INST99-8263HG
Installation instructions for part 99-8263HG
®
METRA - The World’s best kits ®metraonline.com
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted High Gloss Black
A) Radio trim panel B) Radio brackets C) Pocket • D) (2) Panel clips • E) (4) #8 x 3/8” Phillips screws
20;-,(;<9,:
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: TYTO-01
Antenna Adapter: Not required
Steering wheel control interface: ASWC-1 (sold separately)
Panel removal tool • Phillips screwdriver
10mm socket wrench
;663:9,8<09,+
Toyota Avalon 2011-2012
(with factory navigation)
99-8263HG Dash Disassembly ................................................. 2
Kit Assembly
ISO DIN radio provision with pocket ...................... 3
ISO DDIN radio provision ...................................... 3
Table of Contents
A C
B E
D
99-8263HG
®
2
1. Unclip and remove the radio/
climate trim panel. (Figure A)
2. Remove (4) 10mm screws
securing the radio/climate control
assembly. (Figure B)
3.
Remove (4) Phillips screws securing
the climate control to the factory
bracket assembly. (Figure C)
Continue to Kit Assembly
Dash Disassembly
(Figure A) (Figure B) (Figure C)
99-8263HG
®
Kit Assembly
ISO DIN radio provision with pocket
1.
Remove the metal DIN sleeve and
trim ring from the aftermarket radio
.
2. Secure the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
3.
Secure the
pocket
to the radio
bracket assembly using (4) #8 x 3/8”
Phillips screws supplied. (Figure A)
4. Secure the climate control to the
completed assembly using the
factory hardware. (Figure A)
5.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections
to the radio and factory components.
Metra recommends using the proper
mating adapter from Metra and/or
Axxess. Test the radio and climate
controls for proper operation.
6. Attach the (2) supplied panel clips
onto the , snap radio trim panel
the panel to the vehicle, and then
reassemble the dash in reverse
order of disassembly.
(Figure B)
ISO DDIN radio provision
1. Secure the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
2. Secure the climate control to the
completed assembly using the
factory hardware. (Figure A)
3. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio and
factory components. Metra
recommends using the proper
mating adapter from Metra and/or
Axxess. Test the radio and climate
controls for proper operation.
4. Attach the (2) supplied panel clips
onto the , snap radio trim panel
the panel to the vehicle, and then
reassemble the dash in reverse
order of disassembly. (Figure B)
3
(Figure A) (Figure A)
(Figure B) (Figure B)


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-8263HG

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-8263HG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd