Metra 99-7525S Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-7525S (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 2/20/18 INST99-7525S
I N S TA L L A T I O N I N S T R U C T I O N S
99-7525S
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted silver
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation .......................................................4
Kit Assembly
–ISO DIN radio provision with pocket ..................5
–ISO DDIN radio provision .....................................5
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7903
Antenna Adapter: Not required
A CB
Mazda 5(with factory NAV) 2008-2010
D
1.800.221.0932
|
MetraOnline.com
2
1. Remove the shifter knob, unclip and
remove the shifter trim panel, then
remove (2) Phillips screws exposed.
(Figure A)
2. Unclip and remove the left and right
side trim panels from the front of the
center console, then remove (1) Phillips
screws exposed on each side.
(Figures B, C)
Continued on the next page
DASH DISASSEMBLY
P
R
N
M-D
A/C
(Figure B)(Figure A) (Figure C)
REV. 2/20/2018 INST99-7525S 3
DASH DISASSEMBLY (CONT.)
A/C
(Figure D) (Figure E)
3. Unclip the center console, pulling
towards the rear of the vehicle to release
the clips, then sit aside. (Figure D)
Note:
Models with a full center console
will require additional disassembly
.
4. Remove (2) Phillips screws securing
the bottom of the radio/climate control
panel, then unclip just the climate
control panel and set aside. (Figure E)
5. Remove (1) screw securing the bottom
left of the radio, then unclip, unplug,
and remove the radio.
Continue to Kit Preparation


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-7525S

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-7525S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd