Metra 99-7348B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-7348B (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
REV. 11/9/2015 INST99-7348B
Installation instructions for part 99-7348B
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
ISO DDIN radio provision
ISO DIN radio provision with pocket
Painted black to match factory finish
A) Radio trim panel • B) Radio brackets • C) Pocket D) (4) #8 x 3/8” Phillips screws
20;-,(;<9,:
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: 70-7304
Antenna Adapter:Not required
Panel removal tool • Phillips screwdriver
;663:9,8<09,+
Hyundai Accent with radio delete 2012-2013
99-7348B Dash Disassembly ................................................. 2
Kit Assembly
ISO DDIN radio provision ...................................... 3
ISO DIN radio provision with pocket ...................... 3
Table of Contents
CBA D
99-7348B
2
1. Unsnap the radio bezel from the
dash and then remove. (Figure A)
2. Remove (4) Phillips screws
securing the radio delete panel,
and then remove. (Figure B)
Continue to kit assembly
Dash Disassembly
(Figure B)
(Figure A)
Kit Assembly
(Figure A)
(Figure B)
(Figure C)
ISO DDIN radio provision
1. Attach the radio brackets to the
radio trim panel. (Figure A)
2. Slide the radio into the completed
assembly, and then secure with
the screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra or
AXXESS. Reconnect the negative
battery terminal and test the radio
for proper operation.
4. Reassemble the dash in reverse
order of disassembly.
99-7348B
Kit Assembly
(Figure A) (Figure C)
(Figure B) (Figure D)
ISO DIN radio provision with pocket
1. Attach the radio brackets to the
radio trim panel. (Figure A)
2. Attach the pocket to the trim-
panel/bracket assembly with (4) #8
Phillips screws provided. (Figure B)
3.
Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
4.
Slide the radio into the completed
assembly, and then secure with the
with the screws supplied with the
radio. (Figure C).
5.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections
to the radio. Metra recommends
using the proper mating adapter from
Metra or AXXESS. Reconnect the
negative battery terminal and test the
radio for proper operation.
6. Reassemble the dash in reverse
order of disassembly.
3


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-7348B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-7348B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd