Metra 70-8117 Handleiding

Metra Niet gecategoriseerd 70-8117

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 70-8117 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Receiver Wiring Adaptor
120 70-8117
Revision 03/13/17
STEP 1 -- MATCH & CONNECT WIRES
*120708117*
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
Copyright 2017 Crutchfield Corporation
Match wires below to the matching function of each wire on your receiver (refer to instructions supplied with receiver). The wire colors of your
new receiver may, or may not, match the wire colors of the adaptor. Match adaptor and receiver wires by function, disregarding color.
Some wire functions depend upon what vehicle the harness is being applied to. See the chart on the next page as a guide for your particular
vehicle.
Individually tape off any unused wires.
Make final wiring connections following instructions on page 3.
A.
B.
C.
D.
White/Black - Left Front Speaker Negative
Violet/Black - Right Rear Speaker Negative
Yellow - 12 Volts Constant Power
Red - 12 Volts Switched Power
White - Left Front Speaker Positive
Blue - Power Antenna
Violet - Right Rear Speaker Positive
Green - Left Rear Speaker Positive
Gray - Right Front Speaker Positive
Gray/Black - Right Front Speaker Negative
Black - Chassis Ground
Green/Red - (see next page)
Dark Blue/Pink - (see next page)
Green/Black - Left Rear Speaker Negative
Green/Orange - (see next page)
Brown/White - (see next page)
Green/White - (see next page)
- (see next page)
White/Red - (see next page)
Brown/Blue - (see next page
Receiver Wiring Adaptor
120 70-8117
Green/Red
Dark Blue/Pink
White/Red
Brown/Blue
Green/Orange
Brown/White
Green/White
Wire Color Vehicle/Function
4Runner, Sienna-
Rear Tweeters Negative
Matrix, Solara Convertible, Tacoma-
Sub Coil 2 Negative
Sequoia, Solara Coupe-
Left Front Tweeter Negative
Prius, Tundra-
Not Used (tape off)
4Runner, Prius, Sienna-
Center Speaker Negative
Matrix, Solara Convertible, Tacoma-
Sub Coil 1 Negative
Sequoia, Solara Coupe-
Right Front Tweeter Negative
Tundra-
Not Used (tape off)
4Runner-
Subwoofer Coil 1 Negative
Matrix, Prius, Tundra-
Left Front Door Woofer Negative
The White/Black wire is for the Left Front
Tweeter Negative
Sequoia, Solara, Tacoma-
Not Used (tape off)
Sienna-
Subwoofer Coil 2 Negative
4Runner- Matrix, Prius, Tundra-
Subwoofer Coil 2 Negative
The Gray/Black wire is for the Right
Front Tweeter Negative
Sienna-
Subwoofer Coil 1 Negative
4Runner, Sienna-
Rear Tweeters Positive
Matrix, Solara Convertible, Tacoma-
Sub Coil 2 Positive
Sequoia, Solara Coupe-
Left Front Tweeter Positive
Prius, Tundra-
Not Used (tape off)
4Runner, Prius, Sienna-
Center Speaker Positive
Matrix, Solara Convertible, Tacoma-
Sub Coil 1 Positive
Sequoia, Solara Coupe-
Right Front Tweeter Positive
Tundra-
Not Used (tape off)
4Runner-
Subwoofer Coil 1 Positive
Matrix, Prius, Tundra-
Left Front Door Woofer Positive
The White wire is for the Left Front
Tweeter Positive
Sienna-
Subwoofer Coil 2 Positive
Sequoia, Solara, Tacoma-
Not Used (tape off)
4Runner-
Subwoofer Coil 2 Positive
Matrix, Prius, Tundra-
Right Front Door Woofer Positive
The Gray wire is for the Right Front
Tweeter Positive
Sienna-
Subwoofer Coil 1 Positive
Sequoia, Solara, Tacoma-
Not Used (tape off)
Page 2
Copyright 2017 Crutchfield Corporation
STEP 1 -- MATCH & CONNECT WIRES -- CONTINUED
Sequoia-
Not Used (tape off)
Receiver Wiring Adaptor Connections
120 70-8117
Page 3
STEP 2 -- CONTINUED
A. Strip wires back 1/2”.
B. Twist wires together and
insert in crimp cap.
C. Squeeze middle of cap
for tight connection.
Copyright 2017 Crutchfield Corporation
STEP 3 -- APPLICATION
When ready to install the receiver, plug
the Wiring Adaptor from the new receiver
or receiver assembly into the factory
radio harness(es) in the vehicle dash.
D. Complete crimp connections
for all necessary wires.
E. Be sure to wrap any wires from
the Wiring Adaptor that are
not necessary (wires with no
match from the new receiver)
with electrical tape.
STEP 2 -- CRIMP CONNECTIONS
Tools & Parts
Required
Wire Stripper/Crimp Tool Crimp Caps
Unused Wire (tape over bare wires)
Receiver Wiring Adaptor
Generic Illustration
Generic Illustration

Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 70-8117

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 70-8117 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Metra

Metra

Metra FD-BROPOD1 Handleiding

3 April 2024
Metra

Metra AXDIS-HK4 Handleiding

19 Maart 2024
Metra

Metra TE-AJPKT Handleiding

27 Februari 2024
Metra

Metra 99-7342 Handleiding

6 Januari 2024
Metra

Metra 70-7903 Handleiding

6 Januari 2024
Metra

Metra 99-7888 Handleiding

6 Januari 2024
Metra

Metra 99-3020 Handleiding

6 Januari 2024
Metra

Metra 99-7510 Handleiding

6 Januari 2024
Metra

Metra 70-1731 Handleiding

6 Januari 2024
Metra

Metra 99-8222BR Handleiding

6 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024
Sony

Sony PDW-U4 Handleiding

26 April 2024
Sony

Sony NXL-FR318 Handleiding

26 April 2024