Metra 99-6545B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-6545B (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 1/17/18 INST99-6545B
I N S TA L L A T I O N I N S T R U C T I O N S
99-6545B
KIT FEATURES
ISO DIN radio provision with pocket
Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws • E) (7) Panel clips
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wire harness: • XSVI-6523-NAV
Antenna adapter: • 40-EU10
Steering wheel control interface: ASWC-1
A B C D E
Jeep Compass 2017.5-up*
*Visit MetraOnline.com for up-to-date vehicle specific applications.
1.800.221.0932
|
MetraOnline.com
2
(Figure A)
DASH DISASSEMBLY
1. Unclip and remove the a/c vent panel
surrounding the radio.
2. Remove (4) 9/32” screws securing the
radio, then unplug and remove the radio.
Continue to Kit Preparation
Please visit Metraonline.com for
Dash Disassembly illustrations.
1. Attach the
(7)
panel clips
to the
radio
trim panel
.
(Figure A)
Continue to Kit Assembly
KIT PREPARATION
REV. 1/17/2018 INST99-6545B 3
(Figure A) (Figure B)
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Attach the
pocket
to the
radio brackets
using the (4) #8 x 3/8” Phillips screws
provided. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the bracket/pocket
assembly, and then secure it using the
screws supplied with the radio.
(Figure B)
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or Axxess.
5. Test the radio for proper operation.
6. Secure the radio assembly to the dash
using the factory screws.
7. Snap the
radio trim panel
over the radio
assembly to complete the installation.


Product specificaties

Merk: Metra
Categorie: Niet gecategoriseerd
Model: 99-6545B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-6545B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Metra

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd