Metra 99-6502 Handleiding
Pagina's 2 Engels Niet gecategoriseerd
Bekijk de handleiding van Metra 99-6502 gratis online of download de PDF. 309 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
Installation Kit
Tools Required
120 99-6502
Flat Blade
Screwdriver
Parts
Supplied:
Mounting
Bracket
Dodge/Chrysler
Revision 09/13/01
DIN Assembly
1.Using a utility knife, cut out shaft
supports to create the DIN opening
as shown (Figure 1).
2. Remove DIN sleeve from receiver.
3.Slide DIN sleeve into receiver
mounting bracketand secure by
bending securing tabs (Figure 2).
4.Slide receiver fully into sleeve.
5.Install receiver assembly following
instructions in the for Mastersheet
your particular vehicle.
Page 1 of 2
Receiver Mounting Bracket
DIN Sleeve
IMPORTANT
Before starting, compare items on your invoice with items
received. If any parts are missing, first carefully check through
packaging material. If an item is missing, please call:
Crutchfield
Spacer Plate
(for shaft receiver only)
Utility Knife
Shaft Supports
FIGURE 1
FIGURE 2
Securing Tabs
Bend tabs after sleeve
is inside mounting bracket.*120996502*
®
Copyright 2001 Crutchfield Corporation
at 1-888-955-6000
Product specificaties
| Merk: | Metra |
| Categorie: | Niet gecategoriseerd |
| Model: | 99-6502 |
Heb je hulp nodig?
Als je hulp nodig hebt met Metra 99-6502 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Metra
Metra 99-9008 Handleiding Metra 95-7017B Handleiding Metra AXTC-FD2 Handleiding Metra 92-3057P Handleiding Metra 70-7992 Handleiding Metra 95-8909 Handleiding Metra 70-1762C Handleiding Metra 99-6517HG Handleiding