Metra 99-5850B Handleiding

Metra Carkit 99-5850B

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra 99-5850B (4 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 1/26/18 INST99-5850B
I N S TA L L A T I O N I N S T R U C T I O N S
99-5850B
KIT FEATURES
ISO DIN radio provision with pocket
Painted scratch-resistant matte black to match the
factory color and finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Switch trim panel • D) Pocket • E) (4) #8 x 3/8” Truss-head Phillips screws
• F) (4) #8 x 3/8” Pan-head Phillips screws • G) (4) #6 x 3/8” Phillips screws • H) (6) Panel clips TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32” socket wrench • Torx screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: XSVI-5524-NAV
Antenna Adapter: 40-EU10
Steering wheel control interface: • ASWC-1
A B C D E F
G H
Ford F-250/350/450/550 XL (w/o CD player) 2017-up*
*Visit MetraOnline.com for up-to-date vehicle specific applications.
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY KIT PREPARATION
1. Remove the storage mat in the pocket
above the climate-control/radio trim
panel, and then remove (2) 9/32”
screws exposed.
2. Unclip and remove the pocket, and then
remove (2) 9/32” screws exposed.
3. Unclip, unplug, and remove the climate-
control/radio trim panel.
Continue to Kit Preparation
From the factory climate-control/radio
trim panel:
1.
Remove (4) Torx screws securing the climate
control panel and remove.
2.
Unclip and remove the switches.
3.
Unclip and remove the LINE IN jack.
4.
Unclip and remove the power port assembly.
To the 99-5850CH climate-control/radio
trim panel:
5.
Secure the climate control panel to the panel
using the (4) #6 x 3/8” Phillips screws provided.
6.
Secure the
switch trim panel
to the panel
using the (4) #8 x 3/8”
Phillips pan-head
screws
provided.
7.
Snap the factory switches into the switch panel.
8.
Snap the LINE IN jack to the panel.
9.
Snap the power port assembly to the panel.
10.
Attach the (6)
panel clips
to the panel.
Continue to Kit Assembly
Please visit Metraonline.com for
Dash Disassembly illustrations.
Please visit Metraonline.com for
Kit Preparation illustrations.
REV. 1/26/2018 INST99-5850B 3
(Figure A)
(Figure B)
(Figure C)
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Secure the
pocket
to the
radio brackets
using the (4) #8 x 3/8”
Phillips truss-
head screws
provided. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into bracket/pocket
assembly and secure with screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
5. Remove (4) screws in the dash cavity,
and then secure the completed
assembly into the dash using those
screws. (Figure C)
6. Snap the
radio trim panel
over
the completed assembly, and then
reassemble the dash in reverse order
of disassembly to complete the
installation.


Product specificaties

Merk: Metra
Categorie: Carkit
Model: 99-5850B

Heb je hulp nodig?

Als je hulp nodig hebt met Metra 99-5850B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Carkit Metra

Handleiding Carkit

Nieuwste handleidingen voor Carkit